
B
C
3/64in.(1mm) spacing left
between the wall and the
end of screws
E
B
3/64in.(1mm) spacing left
between the wall and the
end of screws
XX
D E
For wood stud mounting, wall
anchors [D] and [E] are not
necessary.
WARNING:
• Check package contents against supplied parts and hardware list to assure that all components
were received undamaged. Do not use damaged or defective parts. lf you require replacement
• Carefully read all instructions before attempting installation. If you do not understand the
instructions or have any concerns or questions, please contact customer service at
• Not all parts and hardware included will be used.
• Do not use this product for any purpose that is not explicitly specified in this manual. Do not
exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting,
incorrect assembly or inappropriate use. Thank you for your understanding.
IMPORTANT SAFETY INFORMATION
Tools Needed (Not lncluded)
Stud Finder Pencil Phillips
screwdriver
Level Drill 5/64 in.(2mm)
Wood Drill
15/64 in.(6mm)
Concrete Drill
Supplied Parts and Hardware
x4
E
x4
D
Hammer
01 02
Step 1 Secure the Metal Bracket to Wood Board
CAUTION!
These wall anchors [E]
are for drywall ONLY.
DO NOT use them in
concrete / brick / wood
studs wall.
Wall Anchor
M3X10MM
A (x8)
M4X40MM
B (x4)
M4X50MM
C (x4)
G (x1)
F (x1)
CAUTION!
These anchors are for
concrete or brick
walls ONLY. DO NOT
use them in drywall
or wood studs.
Wall Anchor
Step 2A For Wood Stud Installation
[Not Included]
(For wood stud only!)
[Optional]
Step 2B For Drywall Installation
H (x2)
M13x40mmM6x30mm
A
A
2 in.(50mm)
For Screw [C]
ø5/64 in.(ø2mm)
E