Amare Musica ENTROPY User manual

Owner’s Manual
EN
ENTROPY INTEGRATED AMPLIFIER
Feel the music
series

RISK OF ELECTRIC SHOCK
DO NOT OPEN
C A U T I O N : T O R E D U C E T H E R I S K O F E L E C T R I C S H O C K ,
DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED AUTHORIZED SERVICE PERSONNEL FOR SERVICING.
AMARE MUSICA is not responsible for any damages due to external
causes, including but not limited to, improper use, problems with
electrical power, accident, neglect, alternation, unauthorized
repair, improper installation or improper testing. This manual
should be read before installation and operation.
The lightning lash with an arrowhead symbol within an
equilateral trainagle is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
products enclosure that may be of suficient magnitude to
c o n s t i t u t e a r i s k o f e l e c t r i c s h o c k t o p e r s o n s .
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the product.
WARNING: DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
IF EXPOSED THERE IS AN INCREASED RISK OF FIRE OR ELECTRIC SHOCK

The packaging contoins
2 pcs EML20B
2 pcs EML1605
ENTROPY
integrated amplifier
AC power cable
Owner’s manual
Owner’ s Manual
EN
ENTRO PY INTEGRATE D AMPLIFIER
Feel the music
series
Remote control

TOP VIEW
FRONT VIEW
REAR VIEW

PUSH THE KNOB
Long push - Turn on/off
Quick one push - Mute
Twice quick push - Selector
STANBY
Turn on rear switch
!!! IMPORTANT INFORMATION !!!
PUT IN TUBES
BEFORE TURN ON

Power on/off
Volume Input selector
OK
Vol Sel
UP
DOWN
LEFT RIGHT
MENU MUTE
OK
Vol Sel
UP
DOWN
LEFT RIGHT
MENU MUTE
Replacing batteries using Cr2430
See site 18

Step 1 Step 2
Step 3 Step 4
Step 5 Step 6
REPLACING BATTERIES REMOTE CONTROL.

SPECIFICATION:
System working in pure Class A
3 unbalanced inputs
1 balanced input
LED Display Matrix with tube wear counter
Output tubes: 2x EML1605 OCTAL
Driver tubes: 2x EML20B OCTAL
Output power: 23Wrms (2Vrms input)
Resistor based volume control
Input impedance: 100k
Output imedance: 4 Ohm and 8 Ohm
Remote control
Dimmensions:430mm x 430mm x 230mm
Weight: 35kg netto