Amart Furniture MAHALIA 76318 User manual

Imported by Amart Furniture Pty Ltd, Brisbane QLD Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
MAHALIA COT
ITEM CODE 76318
Imported by Amart Furniture Pty Ltd, Brisbane, QLD Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
176318
1405mm
977mm
793mm

PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when liing. Product should be assembled as near as possible to
the point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instrucons carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over ghten the screws and bolts as this may damage the threads
15
276318
2
Safety notes
NOTE: Use only spare parts approved by the manufacturer
FOR AUSTRALIA AND NEW ZEALAND (AS/NZS 2172:2013)
RECOMMENDED MATTRESS SIZE 1320mm X 700mm X 120mm
This cot has been manufactured for use with a maress which measures 700mm wide by 1320mm long and 120 mm in
thickness . The width and length are specified because it is important that the gaps between the maress and the sides
and ends of the cot will not exceed 40mm when the maress is pushed to one side or end , and 20 mm when the maress
is centred in the cot . This is to minimize the risk of a child's limb becoming caught in the gap. The thickness of the maress
has been specified to ensure that the depth of the cot is greater than 500 mm with the maress base in the lower posion
to minimise the risk of a child climbing or falling out of the cot.
WARNING:
* TO ENSURE THE SAFETY OF YOUR COT,REGULARLY CHECK ALL THE CONNECTING BOLTS AND GLIDE PINS
MAKING SURE THEY ARE TIGHT.
* TO PREVENT FALLS OR SUFFOCATION THE MAXIMUM MATTRESS THICKNESS SHOULD NOT EXCEED 120MM
*
WARNING: TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD BE ADJUSTED TO THE LOWEST
* Follow the manufacturer’s assembly instrucons in detail to ensure the safety features of the cot are not compromised.
* Ensure the cot is placed at a reasonable distance from curtains, blinds, heaters and power points.
* Keep cot free of any toys, cushions etc that could be used as a foothold or present a danger of suffocaon or
strangulaon.
*Keep medicaon, String, elasc or small items such as money out of reach from any posion in the cot.
POSITION BEFORE THE CHILD CAN SIT UP.

EXPLODED VIEW
PARTS LIST
3 76318
 × 



×












××

××
××

× ×4

× ×1

× ×1

× ×4

× ×4

× ×12

STEP 1: Do not ghten the bolts for now.
Use the top holes for high base
posion (for newborns)
Use the boom holes for low base posion
(for when baby can sit or pull themselves up).
Scker side of the base must face up.
STEP 2: Tighten all the connecng bolts.
476318
×
×
×4











STEP 3: Please insert bolts into remaining holes as illustrated to
avoid lile fingers geng stuck.
Loosen all blocking bolts
on the Side Panels as shown.
STEP 4: Base should be in the lower posion before child is able
to sit up or pull themself up.
576318
××









STEP 5:
STEP 6:
676318










STEP 7:
STEP 1:
Please insert bolts into remaining holes as illustrated to
avoid lile fingers geng stuck.
CONVERT YOUR COT TO TODDLER BED
776318



Remove
When changed into a toddler
bed, this label must be on
the top side of the cot
Flip
×

STEP 2:
STEP 3:
876318
×
Please insert bolts into remaining holes as illustrated to
avoid lile fingers geng stuck.

×

E×4

Warranty against defects
For Australia only (updated 10/15/2022)
Amart Furniture Pty Ltd
www.amartfurniture.com.au
Customer Service Free call 1800 351 084
ABN: 65 009 810 324
Care Instructions
Congratulations and thank you for choosing Amart product(s). The furniture you have purchased is
constructed from high quality materials for strength and durability. Here are some tips on how you
can preserve its beauty for a long time.
1. Do not expose furniture to strong sunlight, direct heat sources, extreme changes in temperature
or moisture.
2. Wipe up spills immediately with a soft, clean cloth.
3. Urine spills on furniture can cause discolouration.
4. Clean furniture by wiping the surface with a soft cloth dampened with water.
5. If necessary clean furniture using a mild soap solution and wipe clean with a soft cloth
dampened with water and then dry with soft clean cloth.
6. Do not use strong household cleaners.
7. Always wipe in the direction of the grain in the wood do not wipe in a circular motion.
8. Avoid contact with sharp objects, or containers containing hot liquid.
9. Avoid contact with ‘rubber feet’ on items such as radios, computers, telephones etc. Use a felt
mat (not plastic) to protect furniture surfaces.
10. Do not open more than one drawer at a time.
11. When moving furniture do not drag, always lift and place in position.
41 Brickworks Place, Rochedale QLD 4123 Australia
Amart Furniture, 41 Brickworks Place, Rochedale QLD 4123 Australia. Customer Service Free call 1800 351 084 www.amartfurniture.com.auAmart Furniture, 41 Brickworks Place, Rochedale QLD 4123 Australia. Customer Service Free call 1800 351 084 www.amartfurniture.com.au