Amazfit GTR3 pro User manual

1/ 27
Amazfit GTR 3 Pro Limited Edition
User Manual (English Edition)
Connection and pairing
Use your phone to scan the following QR code, and download and install the Zepp app. For a
better user experience, update the app to the latest version as prompted.
Note: The operating system of your mobile phone must be Android 7.0 or iOS 12.0, or later.
Initial pairing:
When the watch is started for the first time, the QR code used for pairing displays on the
screen.
Open the Zepp app on your phone, log in to the app, and scan the QR code on the watch to
pair your phone with the watch.
Pairing with a new phone:
1. Open the app on your old phone and synchronize data with the watch.
2. On the old mobile phone, go to the information page of the watch that needs to be re-
paired and tap the Unbind button at the bottom to unbind. If it is an iPhone, after unbinding in
the Zepp app, you need to unpair the phone and watch. Go to Settings > Bluetooth, find the
Bluetooth name corresponding to the watch, and tap the button on the far right of the
Bluetooth name. After entering the page, tap Ignore This Device.
3. Restore the factory settings of the watch, and then pair the watch with your new phone
as described in the initial pairing procedure.
Updating the system of your watch
Keep your watch connected to your phone, open the Zepp app, and go to Profile > My
Device > System Update to view or update the watch system.
We recommend that you tap Update Immediately when your watch receives a system update

2/ 27
message.
Basic operations
Commonly used gestures and buttons
Operation
Corresponding result
Tap the screen
Uses a feature, selects the current item, or proceeds with the
next step
Press and hold the watch
face
Activates watch face selection and watch face settings
Cover the screen
Turns off the screen
Swipe from left to right
On most sub-level pages, returns to the upper-level page
Swipe up or down on the
screen
Scrolls or switches pages
Rotate the digital crown
Scrolls or switches pages
Press and hold the upper
button for five seconds or
longer
Powers on, accesses the restart page, and performs force
restart.
Control center
Swipe down on the watch face page to enter the Control Center, where you can access system
features of the watch.
Supported features include Flashlight, DND, Theater Mode, Keep Screen On, Calendar,
Volume, Battery, Brightness, Find Phone, Bluetooth, Lock, and Settings
Find the phone
1. Keep the watch connected to your phone.
2. On the watch face page, swipe down to go to the control center, and tap Find Phone.
Your phone will ring.
3. In the app list, tap More, and then tap Find Phone. Your phone will ring.
Find the watch
Keep the watch connected to your phone, open the Zepp app, go to Profile > My Device, and
tap Find Watch. Then, your watch will vibrate and ring.
(The default setting is to vibrate only, and the alert tone needs to be set manually: Go to
Watch Settings > Sound and Vibration > Ring for Alert to turn on the switch.)

3/ 27
Watch Faces
Watch face compilations
Some watch faces support editing compilations. With compilations, you can view steps,
calories, weather, and other information, and edit the information as needed.
Edit watch face compilations:
1. After waking up the watch, press and hold the watch face to enter the watch face selection
page, where you can choose other watch faces or edit the compilation.
2. Swipe left or right on the screen to preview watch faces available. The Edit button will be
displayed at the bottom of a watch face that supports compilations. You can tap this button to
go to the page for editing the compilations of this watch face.
3. Select the compilation to edit. Tap a compilation, or swipe up or down on the screen to
switch between compilations.
4. After editing, press the upper button to complete editing and enable the watch face.
Always On Display
If this feature is enabled, the screen still displays time and some information of the watch face
in standby mode, which greatly reduces the battery life.
Set Always On Display:
1. After you wake up your watch, press the upper button to access the app list. Then, go to
Settings > Display and Brightness > Always On Display.
2. Select the watch face style and enable status for Always On Display.
Add watch faces
In addition to the built-in watch faces, you can choose online watch faces as desired from the
watch face store in the Zepp app and synchronize them to the watch. You can also use a photo
you took using your phone or use an image in the album as a custom background watch face.
Add online watch faces:
1. Keep the watch connected to your phone, open the Zepp app, and go to Profile > My
Device > Amazfit GTR 3 Pro Limited Edition > Watch Face Store.
2. Select one or more watch faces, and then synchronize them to the watch to give yourself
multiple options.
Add customized watch faces:
Keep the watch connected to your phone, open the Zepp app, and go to Profile > Amazfit
GTR 3 Pro Limited Edition> Watch Face Store.
Change watch faces
1. After waking up the watch, long press the watch face to enter the watch face selection
screen.
2. Swipe left or right on the screen to preview watch faces available on the watch,
including built-in watch faces and synchronized online watch faces.
3. Tap the desired watch face to replace the current watch face.

4/ 27
Delete watch faces
When the storage space on the watch is almost full, you will need to delete some of the watch
faces to make room for new ones (retain at least one watch face).
1. After waking up the watch, long press the watch face to enter the watch face selection
screen.
2. Swipe left or right on the screen to preview watch faces available on the watch,
including built-in watch faces, synchronized online watch faces, and customized watch faces.
3. Swipe up on the screen. For watch faces with a delete button, you can tap the button to
delete the watch face.
State points
The state point is displayed on the top of the watch face to indicate the functions currently
enabled on the watch, such as the Theater Mode turned on in the watch or the Countdown app
running in the background.
The supported display states are:
•Low battery
•DND Mode
•Theater Mode
•Stopwatch (tap the state point to go to the app)
•Countdown (tap the state point to go to the app)
•Music playing (tap the state point to go to the app)
•In workouts (tap the state point to go to the app)
•Charging
Notifications and calls
App alerts
Keep the watch connected to your phone to receive the phone app alerts on your watch. On
the watch face page, you can swipe up to view the latest 20 alerts in the notification center.
Clearing all notifications:
There is a Clear button [ ] at the bottom of the notification list. Tap it to clear all
notifications.
Or, after the watch restarts, notifications will be automatically cleared.
Clearing a single notification:
When a notification is pushed, or after you open a specific notification from the notification
list, you can delete the notification by pressing the delete button at the bottom.
Setting method:
Keep the watch connected to your phone, open the Zepp app, choose Profile > My
Device >Amazfit GTR 3 Pro Limited Edition>Notification and Reminder>App alerts to
enable alerts for apps as needed.

5/ 27
Note:
•To enable this feature on an Android phone, you need to add the Zepp app to the allowlist or
auto-run list in the phone's background so that the app always runs in the background. If the
Zepp app is terminated by the phone's background process, the watch will be disconnected
from your phone, and you cannot receive app notifications on the watch.
•For iOS, there are limited apps that can be set in the Notification and Reminder > App alerts
just after the watch is activated. As the phone receives the notification messages from more
apps, more apps will be displayed in the Notification and Reminder > App alerts of the Zepp
app.
Bluetooth calling
Once this feature is enabled, pair the watch with your phone via Bluetooth and maintain the
connection to receive calls on the watch.
While the watch and your phone are connected via Bluetooth, you can also use the "Call" app
on the watch to make Bluetooth calls.
Bluetooth calling setup methods:
Method one: Start the Zepp app, and go to Profile > Amazfit GTR 3 Pro Limited Edition>
App Settings. On the call page, turn on" Bluetooth calls ", and pair the watch and your phone
through Bluetooth as instructed.
Method two: On the watch and your phone, go to Settings > Bluetooth to pair the watch with
your phone:
1. On your phone, go to Settings > Bluetooth, and enable the Bluetooth to make the phone
discoverable. On the watch, go to App list > Settings > Network & Connections > Bluetooth,
and ensure the Bluetooth is enabled.
Find the watch in the search results for available devices on your phone, and tap to pair the
devices. Or, find your phone in the Bluetooth search results on the watch, and tap to pair
them.
Incoming call alert
To enable this feature, open the Zepp app, and go to Profile > Amazfit GTR 3 Pro Limited
Edition > App Settings > Phone>Incoming call. Once the feature is enabled and the watch and
phone are connected, the watch will display a prompt when the phone receives a call, and you
can ignore, answer or hang up the call on the watch.
Shortcuts
Shortcut Cards
Swipe right on the watch face to go to the Shortcut Cards page, where you can easily use and
view various features and information:
You can add frequently used feature cards to this page for more convenient access, such as
your latest event, next alarm, or recent BPM data.
You can also open the Zepp app and go to Profile > Amazfit GTR 3 Pro Limited Edition >
Shortcut Cards, where you can set shortcut cards to display and their display order.

6/ 27
Quick access apps
Slide left on the watch face to view quick access apps. Quick access apps allow you to
conveniently access watch features. You can add your frequently used apps and features, such
as "Workout".
Workout.
Change quick access apps
1. After waking up the watch, press the upper button to open the app list. Go to Settings >
Preferences > Widget, and swipe up or down on the screen to view the apps that can be added
to Quick Access Apps.
2. When the number of Current apps reaches the upper limit, but you want to add new
apps, remove redundant apps first, and then add the ones you need.
Press buttons for quick start-up
You can go to Watch > Settings > Preferences and select the app to be quickly launched, and
then you can quickly open the previously set app by operating the corresponding button.
Triggering methods:
- Press and hold the upper button
- Press the lower button
Workout
Workout modes
The watch supports over 150 workout modes, including Running&walking, cycling,
swimming, outdoor workouts, indoor workouts, dance workouts, combat workouts, ball
workouts, water workouts, winter workouts, leisure workouts, board & card games, and other
workouts.
You can view all workout modes under More Workouts at the bottom of the workout list. To
customize the workout list, tap Edit List at the bottom of the workout list.
Workout list
1. Tap Workouts in the watch App list or press the lower button on the watch face (if quick
start-up is set for workouts) to go to the workout list.
2. Tap the workout to start in the workout list.
3. Select More Workouts to view all workout modes and start a workout.
4. Tap to edit the workout list, where you can add, delete, and sort workouts.
Select workout
In the workout list, swipe up or down on the screen or rotate the digital crown to select the
workout to start.
Start a workout

7/ 27
After entering the workout preparation page, for workouts that require GPS, the watch will
automatically search for a GPS signal. The red status bar indicates that the watch is searching
for a signal, and the green status bar indicates that signal is found. We recommend that you
tap the workout icon to enter the exercise after a successful GPS positioning , which can
improve the accuracy of workout data calculation.
Workout operations
Turn pages during a workout
During a workout, you can either swipe up or down on the screen or rotate the digital crown
to turn pages. Swipe left or right to turn pages left and right. On the left side of the workout
data page, you can pause or end the workout. On the right side of the workout data page, you
can control music playback on the watch app or the mobile phone.
After auto screen lock is enabled, the screen will turn off during workouts/in AOD
mode/when the screen times out, and the status bar will display the icon.
When this happens, you will not be able to operate the touch screen. You must press the
button to unlock the touch screen before you perform any operation, or you can directly press
the button to perform workout operations.
For swimming, the touch screen will be continuously disabled during the workout, and can
only be used after you pause or finish the workout by pressing the button.

8/ 27
Button definitions during workouts:
1. When the screen is locked, press the button to unlock.
2. When the screen is unlocked, press the upper button to pause/continue the workout.
3. When the screen is unlocked, press the lower button to start a new lap/set.
Workout operations page
1. Pause/resume
Tap to enter the workout pause/resume page.
2. End
Tap to end the current workout and save the data.
3. Workout Assistant
Tap to modify some of the workout assistant settings (can be modified on the page when
pause the workout ).
4. Resume later
Press to save the current workout and return to the watch face. Enter the workout app again to
return to the workout pause page.
5. More
Press to modify some of the settings.
6. Auto screen lock
After auto screen lock is turned on, the screen will lock after being active for the Screen-on
Duration during a workout. Touchscreen interaction is deactivated, but you can tap the button
to unlock it (during a swimming workout, the screen is locked throughout the workout and
can only be unlocked after the workout is paused).
Workout settings
On the workout preparation page, you can swipe up to go to the workout settings page to set
the current workout mode. The related parameters vary depending on the workout mode.
Workout Assistant
The workout assistant provides auxiliary tools for your workout, including the workout goals,
workout reminders, auto laps, auto pause, cadence assistant, and virtual pacer. Auxiliary
features provided by the workout assistant vary depending on workouts.
Workout Goal
You can set workout goals, such as the duration, distance, calories, and effect in Workout
Goal. The watch displays the current goal progress in real time during workouts. A message
displays upon you achieve the preset workout goal. Workout goals vary depending on
workouts.
Workout Alerts
In this setting, you can set various reminders according to your needs, such as Distance
Reminder, Heart Rate Reminder, etc. Workout alerts vary according to the workout.
1. Distance reminder
The watch vibrates and displays the duration that you use for each full kilometer/mile during

9/ 27
the workout.
Go to Workout Mode > Workout Assistant > Workout Alerts > Distance, set a target distance,
and enable this feature.
2. Safe Heart Rate Reminder
During a workout, if the watch detects that your heart rate exceeds the safe heart rate value
you have set, it will vibrate and display a message on the screen. In this case, you need to
slow down or stop.
Go to Workout Mode > Workout Assistant > Workout Alerts > Safe Heart Rate, set a safe
heart rate value, and enable the feature.
3. Heart rate range alert
During a workout, if the watch detects that your heart rate does not fall within the configured
heart rate zone, it will vibrate and display a message on the screen. In this case, you need to
speed up or slow down to ensure that your heart rate is within the configured range.
To set the feature, go to Workout Mode > Workout Assistant > Workout Alerts > Heart Rate
Zone, set a heart rate zone, and enable this feature.
4. Pace alert
You can set a maximum/minimum pace value. If your pace exceeds the preset value, the
watch will vibrate and display a message.
Go to Workout Mode > Workout Assistant > Workout Alerts > Pace, set a pace, and enable or
disable this feature.
Additionally, the watch also supports alerts for the following: high speed, trips, speed, stroke
frequency, cadence, time, calorie, drinking, energy intake, and return.
Cadence Assistant
You can set the cadence per minute and the reminder frequency. During a workout, the watch
can sound or vibrateaccording to the set cadence, so that you can control your cadence.
Go to Workout Mode > Workout Assistant > Cadence Assistant, set the cadence per minute
and the reminder frequency, and enable this feature.
Virtual pacer
After you set a pace value of the virtual pacer, the current pace, the distance leading/lagging
the virtual pacer, and your position in relation to the virtual pacer can be displayed during
workouts.
Go to Outdoor Running/Treadmill > Workout Assistant > Virtual Pacer, set the pace of the
virtual pacer, and enable this feature.
Blood oxygen
When this feature is enabled, you can measure your real-time blood oxygen during workouts.
The measurement result will be saved in the workout history.
Go to Climbing/Hiking > Workout Assistant > Blood Oxygen, and enable this feature.
Auto lap
This feature is available for some workouts. You can set the auto lap distance in the workout

10 / 27
settings, and the watch will start an auto lap and remind you each time you reach the set
distance during a workout. Also, when the screen is on and unlocked during a workout, you
can press the lower button of the watch to manually start a lap.
The watch also records the workout details of each lap for both manual lap and auto lap. After
the workout ends, you can view details of different laps.
Go to Workout Mode > Workout Assistant > Auto Lap, and set the auto lap distance. Manual
laps do not require any setting.
Auto Pause
Enable or disable Auto pause. After the feature is enabled, the workout will be automatically
paused when the workout speed is too low. When the speed increases to a certain threshold,
the workout can be resumed. You can also resume the working during the pause. The auto
pause threshold can be customized for some workouts.
More
Edit data items
You can edit data items during workouts, including editting the workout data and charts,
deleting, adding or sorting data pages.
Optional values of the data page format include 1, 2, 3, 4, 5 or 6 data items per page.
More than 150 workout data items are supported (specific supported data items vary by
workouts).
More than 8 types of real-time charts are supported, including pace, elevation, and more.
Up to 10 pages of data/workout charts can be added.
3D data mode
You can enable or disable the feature for some workouts in workout settings. If the feature is
enabled, the watch calculates distance using 3D data, as shown in the preceding figure. As
shown in the picture, after 3D distance is enabled, the slope distance of the route will be
calculated, the altitude and slope changes will be considered, and the calculated distance will
match the actual distance of the route. If 3D distance is not enabled, the projected distance