
Packing up your screen
Pack your screen by reversing the
assembly instructions with special
attention to the following.
Lower the top bar using the
coloured button before
unhooking the screen. Gently
retract the screen into the
casing, do not let it go too fast.
Ensure that the screen is packed
correctly before transportation.
Setting up your screen
Stand the screen vertically and
carefully spread the tripod legs out
fully.
Adjusting your screen
You can set the height as well as the shape
of the viewing area by adjusting the top and
bottom of the screen.
Adjusting your screen tilt
The screen can be adjusted for
uneven ground using the housing
adjustment.
Raise the top hook
using the coloured
button to release the
top locating pin.
Rotate the screen
casing to the
horizontal position.
Lift the screen using
the ring and place onto
the top hook.
Use the optional
extension rod
if you require a
greater screen
angle.
L oc ke d
condition
U nloc ke d
condition
Lock
Unlock
L oc ke d
condition
U nloc ke d
condition
Lock
Unlock
To adjust the
top bar press the
coloured button
while lifting with
your other hand.
Adjust the height of the bottom casing
using the locking handle.
Be sure to lock the handle securely with the
coloured knob after adjustment.
Lock
Unlock
Housing adjuster