Amcrest IP8M-T2599EW User manual

Amcrest IP8M-T2599EW / IP8M-T2599EB
8MP POE 4K AI Dome Camera
User Manual
Version 1.0.0
Revised July 2nd, 2020

2
Contents
Welcome.....................................................................................................................................3
Important Security Warning........................................................................................................3
Important Safeguards and Warnings...........................................................................................3
Features and Specifications.........................................................................................................4
Overview.....................................................................................................................................4
Features......................................................................................................................................4
Device Overview .........................................................................................................................5
Connection & Installation............................................................................................................5
Connection Guide .......................................................................................................................5
Installation Guide........................................................................................................................6
MicroSD Card Installation............................................................................................................7
Camera Access Setup ..................................................................................................................7
Default Username and Password ................................................................................................7
How to Setup the Camera ...........................................................................................................7
App Setup ...................................................................................................................................8
Desktop Access Setup ...............................................................................................................13
Operation and Interface............................................................................................................14
Live ...........................................................................................................................................14
Playback....................................................................................................................................15
Setup ........................................................................................................................................16
Camera .....................................................................................................................................16
Event.........................................................................................................................................31
Storage .....................................................................................................................................45
Destination ...............................................................................................................................47
System ......................................................................................................................................50
Information...............................................................................................................................55
Alarm........................................................................................................................................56
Logout.......................................................................................................................................57
Remote Web Access Setup........................................................................................................57
Amcrest Cloud Desktop Setup...................................................................................................59
Web Access Setup (AmcrestView.com) .....................................................................................60
FAQs/Troubleshooting ..............................................................................................................60
Glossary of Terms......................................................................................................................62
FCC Statement ..........................................................................................................................63
IC Warning Statement...............................................................................................................64
Appendix A: Toxic or Hazardous Materials or Elements.............................................................64

3
Welcome
Thank you for purchasing an Amcrest camera!
This user manual is designed to be a reference tool for the installation and operation of your AI camera.
Here you can find information about the camera’s features, functions, and information to aid in troubleshooting.
Many of the setup and installation sections below have corresponding videos on YouTube
To access the setup videos, please go to http://amcrest.com/videos
For access to the quick start guide and other support information, go to http://amcrest.com/support
To contact Amcrest support, please do one of the following:
Visit http://amcrest.com/contacts
Important Security Warning
To keep your Amcrest camera secure and prevent unauthorized access, please make sure to follow the steps
below:
•Always make sure that your camera has the latest firmware as listed on
www.amcrest.com/firmware
•Never use the default password for your camera. Always ensure that your
password is at least 810 characters long and
contains a combination of lowercase characters, uppercase characters as well as
numbers.
Important Safeguards and Warnings
1．Electrical Safety
All installation and operation should conform to your local electrical safety codes.
The product must be grounded to reduce the risk of electric shock.
We assume no liability or responsibility for any fires or electrical shock caused by improper handling or installation.
2．Transportation Security
Heavy stress, violent vibrations, and excess moisture should not occur during transportation, storage, and
installation of the device.
3．Installation
Handle the device with care. Keep the device right side up.
Do not apply power to the camera before completing installation.
Do not place objects on top of the camera.
4．Repair Professionals
All the examination and repair work should be done by qualified service engineers. We are not liable for any
problems caused by unauthorized modifications or user-attempted repair.

4
5．Environment
The camera should be kept in a cool, dry place away from direct sunlight, flammable materials, explosive
substances, etc.
This product should be transported, stored, and used only in the specified environments as stated above. Do not
aim the camera at a strong light source, as it may cause overexposure of the picture, and may affect the longevity
of the camera’s sensors.
Ensure that the camera is in a well-ventilated area to prevent overheating.
6. Operation and Maintenance
Do not touch the camera sensor or lens directly.
To clean dust or dirt from the lens, use an air blower or a microfiber cloth.
7. Accessories
Be sure to use only the accessories recommended by manufacturer.
Before installation, please open the package and check to ensure that all the components are present. Contact the
retailer that you purchased from, or Amcrest directly if anything is broken or missing in the package.
Features and Specifications
Overview
Amcrest provides an excellent digital surveillance product that can be useful to a wide variety of users. This camera
connects uses an internet connection to allow the user to access all its features. It is easy to use and can be viewed
on a computer via the built-in web user interface or on your smartphone using the Amcrest View Pro app.
This camera adopts a high-quality design to achieve high levels of reliability and security. It can be configured to
work locally, as well as on a network. This camera works using a POE connection and interfaces with most
networks through the Ethernet port of your router, POE injector or POE switch.
Features
This camera has the following features:
•Network Access
The camera can be accessed remotely from a wide variety of internet connected devices, including PCs, Mac, iOS,
and Android devices.
•Cloud Storage Functionality
Amcrest offers premium cloud storage options to enable long-term storage. Amcrest Cloud also allows the user to
easily locate and view recordings for playback from any internet connected computer or smartphone
(iOS/Android).
•Advanced Network Protocol Support
This camera is UPnP compatible, and includes functionality for use with DDNS, and other protocols to allow remote
and local connection with a large variety of network hardware.
•AI Features
This camera includes advanced IVS features such as tripwire and intrusion which help to increase the overall
efficiency and accuracy of the camera.

5
IMPORTANT: Due to specific hardware limitations within your camera it is important to note that these devices will
not be able to automatically pan/tilt or pivot in either the app or via the web UI on a computer. For this reason, it
is imperative to make sure to mount the cameras properly and position them as efficiently as you can to the areas
you wish to monitor. All positioning actions to the camera will have to be performed manually.
Device Overview
The image below shows the structure of the camera:
1. The manually adjustable camera
To access the reset button, microSD card slot, or to manually adjust the camera angle, use a Torx/Hex wrench to
open the camera assembly by removing the 3 screws.
For reference, a Torx/Hex screwdriver tip looks like this:
Connection & Installation
This section provides information about the connection and installation of your camera.
Connection Guide
The camera initially should be connected via the following method:
Once connected to a PC or mobile device you will be able to configure the device to your network. For more
information.

6
Installation Guide
To install the camera on a ceiling or wall, please reference the below diagram as well as the steps:
Note: Prior to installation, please ensure that the installation environment can support at least 3x the weight of the
camera and bracket.
To install the camera on a ceiling or wall, please reference the below diagram as well as the steps:
Note: Due to certain hardware limitations within your camera it is important to note that these devices will not be
able to automatically/remotely pan/tilt or pivot in either the app or via the web UI on a computer. For this reason,
it is imperative to make sure to mount the cameras properly and position them as efficiently as you can to the
areas you wish to monitor. All positioning actions to the camera will have to be performed manually.
To install the camera onto a wall, follow the steps below:
1.Place the installation sticker onto the mounting surface.
2.Drill bottom holes according to the installation position map and insert the included wall anchors into the holes.
If running wires through a wall/ceiling a 1” paddle bit can be used to drill the center portion of the sticker.
3.Use the included torx wrench to remove the security screw on the front of the casing. This will disassemble the
camera from its case.
4.Align the holes on the bottom installation bracket to the wall anchors on your mounting surface. Run the wiring
through the newly drilled hole or on the side of the camera keeping the camera and mounting bracket level with
the mounting surface.
5.Use a Phillips head screwdriver (not included) to secure the bottom bracket and camera to the mounting surface.
6.Place the top portion of the casing over the camera and installation bracket and use the included torx wrench to
tighten the security screw back onto the casing. Do not overtighten the security screw as it may not properly be
secured if overtightened.

7
MicroSD Card Installation
A microSD card can be used to store and view local recordings/snapshots. This camera requires a class 10 or above
microSD card formatted to FAT32 to function. The camera can handle a max of 256GB of microSD card storage.
1. Locate the Reset cover on the top of the camera. This area will provide access to the factory reset button as well
as the microSD card slot.
2. Use a Phillips head screwdriver to remove the cover. If you are having trouble removing the cover, use the
provided torx wrench to remove the camera’s dome enclosure.
3. Locate the microSD card slot, and with the gold pins forward towards the lens, insert the microSD card into the
slot.
4. Gently press down until you hear a click. This click indicates the microSD card has been properly secured.
5. Place the cover back onto the camera and secure it to the camera using a Phillips head screwdriver. If you have
removed the dome enclosure, please the enclosure back onto the camera and secure it tightly with the torx
wrench.
Camera Access Setup
This section will provide information on how to setup and access your camera through the following methods:
•Local PC (Web User Interface (Web UI), Amcrest Surveillance Pro, etc.)
•Amcrest View Pro app
•Amcrest Surveillance Pro
•Amcrest Cloud
Default Username and Password
To login to the system for the first time, use one of the following default username/password combinations. Once
you have successfully logged in, it is highly recommended to change the password for security reasons.
Username: admin
Password: admin
Note: Logging in for the first time will prompt the user to change the password to the admin account.
How to Setup the Camera
To make your experience with your Amcrest camera easy and simple, we have provided multiple ways to set up,
view, and operate your camera depending on your needs. Please follow the instructions on this page to set up your
camera in the way that works best for you.
Setting up Your Camera for the First Time
If you are setting up your camera for the first time, or you are setting up your camera for mobile viewing. Using the
Amcrest Cloud app or Amcrest View app on your smartphone or tablet, you can view your camera live from
anywhere, and access features such as taking snapshots, creating recordings, and more.

8
For Configuring Advanced Settings on Your Camera
If you would like to configure your camera to enable advanced features such as motion direction, e-mail alerts,
FTP, image adjustments, scheduling and more.
For Cloud Storage and Playback
Amcrest Cloud is our optional cloud storage and playback service which allows you to access recorded footage
from any device. Amcrest Cloud offers both motion detection and continuous storage plans to fit your needs. For
more information on the Amcrest Cloud, please visit: https://amcrest.com/cloud/
For Quick Web Access to Your Cameras
AmcrestView.com is a web portal that allows you to view your cameras and recordings quickly and easily from
anywhere in the world using a web browser. Use AmcrestView.com if you need to simply check-in at a moment's
notice. If you would like to use AmcrestView.com.
App Setup
Amcrest cameras can be used on your mobile device using the following apps:
•Amcrest Cloud
•Amcrest View Pro
Both apps are free and available in the App Store and Google Play store. Please note, each app requires an iOS 6.0
or later version. Android will require a 3.0 or later version OS to run these apps.
For purposes of this guide, we will use iOS, though both apps. The App Interface may differ slightly from the
screenshots below as updates are released. Below, you will find instructions on how to set up your camera up on
the Amcrest cloud app as well as the Amcrest View Pro app.
Amcrest Cloud App Setup
Amcrest Cloud allows you to access your device from anywhere in the world. Please note, you will need an
Amcrest Cloud account to proceed with Amcrest Cloud app setup. You can register for a cloud account in the
Amcrest Cloud app or from the Amcrest Cloud website at amcrestcloud.com
•Please make sure your camera is plugged into a power source and your Ethernet cable is connected from the
camera to your router.
•Make sure your camera and mobile device are on the same network during setup.
•To ensure the camera connects to the cloud, a reboot of your camera is recommended. To add your camera
onto the Amcrest Cloud app, follow these steps:
1. Download and open the Amcrest Cloud app from the App Store or Play Store.
Note: Connect your mobile device to the same network that your camera is on.
2. Register for an Amcrest Cloud account. To register click on Sign Up and fill out the form to complete registration.

9
3. Tap on Add Camera
4. Give your camera a name (Ex. Garage, Living Room,
Kitchen, etc.) and tap Next to continue.
5. Scan the QR code on the back/side/bottom of
the camera or manually enter the camera’s serial
number into the Enter camera S/N (serial number)
field. Press Next to continue.
6. If you are adding a new camera that does not have
a set password the app will automatically detect that
a new camera is being added. Tap OK to proceed.

10
7. Set a new password for your camera. The password
must be between 8 to 32 characters long and contain
only letters and numbers. When you have finished
setting the password for your camera, enter the
password again in the Confirm Camera Password
section. Tap Next to continue.
8. Confirm and adjust any needed settings for your
camera. When all settings have been confirmed, tap
Finish.
For more information about the Amcrest Cloud app and its features, visit amcrest.com/support
Amcrest View Pro Setup
To add your PoE camera to the Amcrest View Pro app follow these steps:
•Make sure your camera is plugged into a power source and your Ethernet cable is connected from the camera to
your router.
•Make sure your camera and mobile device are on the same network during setup.
1. Download and open the Amcrest View Pro app from the App Store or Play Store.

11
2. Open the app and tap on the + symbol in the middle
of the screen to begin adding your PoE device.
3. Tap on Add Device to add a new device to your app.
4. Tap on PoE Camera
5. Next, select a connection type. Since we will be
setting up a basic P2P connection with the device, tap
on "P2P Connection" to continue.

12
6. Scan the QR code on the back/side/bottom of
the camera or manually enter the camera’s serial
number into the Enter camera S/N (serial number)
field. Press Next to continue.
7. Give the camera a name (e.g. Garage, Kitchen,
Living Room, etc.) and provide the username and
password for your camera. The default username and
will be admin. Tap Start Live View to continue.
Note: You can tap on the icon to verify the
password.
Note: Android users, tap on Scan QR Code to access the QR code reader.
8. The app will prompt you to change the password.
Enter a password between 8 and 32 characters and
confirm the password. Press OK to continue.
9. Your camera is now set up and ready for use on the
Amcrest View Pro app.
For more information about Amcrest View Pro and its functionalities visit amcrest.com/support

13
Desktop Access Setup
The AI features associated with your camera are only accessible and customizable using the built-in web user
interface via a web browser.
This camera features the latest in JS technology which allows you to access your camera via a wide variety of web
browsers including, Google Chrome, Firefox, Safari and other mainstream web browsers via your PC or Mac
computer. For more information on how to access your camera from your computer please refer to the
information below.
To access your camera from your computer you will need to first locate the camera’s IP address. To locate the
camera’s IP address is it highly recommended to download our free Amcrest IP Config Tool software. The Amcrest
IP Config Tool can be downloaded at the following web page: amcerest.com/downloads
In the All Downloads menu, click on IP Config Software to begin the free download. Once the download has
completed installing, locate the IP address associated with the device you would like to view in the browser.
Open a web browser and enter this IP address for your camera into browser and press Enter.
In the web user interface, enter the login credentials for your device. If this is the first time accessing the device,
the username and password will both be admin. Click on Login.
If this is the first-time logging into your device, you will be prompted to modify the password for your device. To
modify the password, enter the new password you would like to use in the New Password field and confirm. The
password used should be between 8 and 32 characters long with a combination of letters and numbers.
Click OK when and allow the stream to load.

14
Operation and Interface
This section will show you the basic operation and interfaces of the web user interface for your camera.
Live
By default, the interface opens on the Live tab. The live view tab allows the user to see a live video feed from the
camera. The live view tab has five main sections:
Section 1: These options allow the user quick access to the live view screen, playback, as well as to Amcrest Cloud.
Section 2: This section allows the user to switch between Main Stream and Sub Stream.
Section 3: This is the live view feed from the camera.
Section 4: This section allows the user to access setup options, alarms, and logout the interface.
Section 5: This option allows the user to take a snapshot of the live view screen.

15
Playback
The Playback tab allows the user to playback the camera’s recorded video. Below is a screenshot of the Playback
tab:
This is the interface for the playback menu. There are 5 main sections:
Section 1: Allows the user to filter between video (.mp4) or snapshots (.jpg).
Section 2: Allows the user to playback events based on calendar dates. If events are detected via the microSD card
the days will be highlighted indicating recordings are available for that day.
Section 3: The File List option provides a list of all recorded file types reported on a specific day. The files
represented in the file list can be played back and downloaded from this menu.
Section 4: Once a recording is selected from the file list, use the play, and stop button to play or stop the
recording. An additional slider option will be displayed by hovering the mouse pointer over the playback interface.

16
Section 5: These options allow the user to filter between recording types such as, General, Motion, Alarm, or
Manual events. The “All” option will select all recording types in the interface.
Cloud Storage
The Cloud Storage tab allows the user quick access to the Amcrest Cloud website.
At this website (amcrestcloud.com) users can register for new accounts as well as view or modify existing accounts.
For more information on Amcrest Cloud visit: amcrest.com/cloud
Setup
The Setup tab allows the user to change different camera settings. Below is a screenshot of the setup tab:
There are 3 main sections to note in the Setup tab:
1. Menu Bar: Allows the user to switch between Configuration and Profile Management options.
2. Menu Items: Each menu option opens a different menu which allows the user to change between specific
settings configurations.
3. Menu Tab: Displays menu items pertaining to the selected tab.
Camera
This menu tab allows the user to change different camera settings for video and to manage image profiles.

17
Configuration
The Configuration menu allows the user to configure image profiles for normal, day, and night usage. Below is an
explanation of the features provided in this menu.
Picture
•Profile: This dropdown box allows the user to select which profile to modify. The 3 options are Day, Night, and
General.
•Brightness: This slider is used to adjust playback and recorded video window brightness. The value ranges from 0
to 100. The default value is 50. The larger the number, the brighter the video is. When you input the value here,
the bright section and the dark section of the video will be adjusted accordingly. You can use this function when
the whole video is too dark or too bright. Please note the video may become hazy if the value is too high. The
recommended value ranges from 40 to 60.
•Contrast: This slider is used to adjust playback and recorded video window contrast. The value ranges from 0 to
100. The default value is 50. The larger the number is, the higher the contrast is. You can use this function when
the whole video brightness is OK, but the contrast is not correct. Please note the video may become hazy if the
value is too low. If this value is too high, the dark section may lack brightness while the bright section may
overexpose. The recommended value ranges from 40 to 60.
•Saturation: This slider is used to adjust playback and recorded video window saturation. The value ranges from 0
to 100. The default value is 50. The larger the number, the stronger the color is. This value has no effect on the
general brightness of the whole video. The video color may become too strong if the value is too high. For the grey
part of the video, distortion may occur if the white balance is not accurate. Please note the video may not be clear
if the value is too low. The recommended value ranges from 40 to 60.
•Sharpness: This slider is used to adjust the sharpness of the video. The value ranges from 0 to 100. The larger the
value is, the clearer the edges are and vice versa. Note: The higher the value, the higher likelihood of picture noise
occurring. The default value is 50 and the recommended value ranges from 40 to 60.
•Gamma: This slider is used to adjust the gamma of the video. The larger the number, the brighter the video is.
The default value is 50 and the recommended value ranges from 40 to 60.

18
•Mirror: This radio button allows the user to turn the mirroring feature on or off. Turning mirroring on will mirror
the picture.
•Flip: This dropdown box allows the user to flip the video feed picture. Flipping the picture is recommended only if
the camera is mounted upside down.
Exposure
This menu allows the user to adjust exposure settings. Below is an explanation of the features listed in this menu.
•Profile: This dropdown box allows the user to select which profile to modify. The 3 options are Day, Night, and
General.
•Anti-Flicker: These options allow the user to select what type of anti-flicker technology will be used for the video
feed. The three options are 50 Hz, 60 Hz, and Outdoor. The desired option should offset any flickering effect
caused by the electrical current used in the specific area.
•Mode: This dropdown menu allows the user to modify certain exposure settings related to the device such as, gain
priority, shutter priority or setting a manual gain setting.
•Auto: This setting allows the camera to automatically adjust exposure settings while in use.
▪gain First: This setting will maximize the gain for the ideal exposure. Low Noise Basically turns up the ISO to
the best setting without sacrificing exposure timing.
▪Shutter Priority: This setting will maximize the fastest shutter speed and will sacrifice the gain in return.
▪Manual - This setting lets you select your shutter speed and have the gain adjust automatically. Selecting
customized range will let you both the shutter speed an adjust the gain manually.
•3D NR: Allows the user to enable or disable 3D noise reduction.
•3D NR Level: This slider allows the user to specify the 3D Noise Reduction level. The value ranges from 1-100.
To reset to default settings, click the Reset Defaults button. To refresh the screen, click on Refresh. To save the
settings, click the Save button.
BLC Mode
This menu allows the user to adjust back light compensation settings. Below is an explanation of the features
provided in this menu.
•OFF: Disables BLC mode.
•BLC: backlight compensation: Default will use the whole image to balance the lighting settings, and Customized will
allow you to balance the lighting settings from the target area.
•WDR: Wide Dynamic Range makes multiple scans of a scene to provide one balanced and unwashed image that is
clear for the user.
•HLC: Highlight compensation is a feature that came out of necessity due to overexposure from strong light sources
like headlights or spotlights.
To reset to default settings, click the Reset Defaults button. To refresh the screen, click on Refresh. To save the
settings, click the Save button.
WB
This menu allows the user to adjust white balance settings. Below is an explanation of the features provided in this
menu.
•Profile: This dropdown box allows the user to select which profile to modify. The 3 options are Day, Night, and
General.

19
•Mode: This option allows the user to choose between different white balance modes.
•Auto: Allows the camera to automatically adjust white balance settings while in use.
•Sunny: Allows the camera to automatically adjust white balance settings in sunny or bright conditions.
•Night: Allows the camera to automatically adjust white balance settings in nighttime or dark conditions.
•Outdoor: Allows the camera to automatically adjust white balance settings while in outdoor (sunny or dark
environments.
•Customized: Displays options that will allow the user to manually adjust specific red or blue values related to
white balance.
•Regional Custom: Allows the user to select an area (region) on the live view screen in which white balance will
be most applicable.
To reset to default settings, click the Reset Defaults button. To refresh the screen, click on Refresh. To save the
settings, click the Save button.
Day & Night
This menu allows the user to adjust day and nighttime settings. Below is an explanation of the features provided in
this menu.
•Profile: This dropdown box allows the user to select which profile to modify. The 3 options are Day, Night, and
General.
•Mode: This dropdown box allows the user to select different Day & Night balance modes. The 3 options are Auto,
Color, and B&W.
o Auto - Uses D&N Sensitivity setting to change between color mode and infrared and black and white
mode.
o Color - Preset which allows the camera to compensate color in day or night profiles.
o B&W - Sets the picture to black and white, however when illumination is too dark it switches on IR
mode.
•Sensitivity: This option allows the user to change the Day/Night Sensitivity of the camera. The three options are
Low, Middle, and High. The higher the sensitivity, the quicker the camera will change into another mode
depending on the light levels.
•Delay: This dropdown box allows the user to set a delay in seconds for how long it takes to switch between Day
and Night modes. The values range from 2 seconds to 10 seconds.
To reset to default settings, click the Reset Defaults button. To refresh the screen, click on Refresh. To save the
settings, click the Save button.
IR Light
This menu allows the user to set IR light settings. The IR light on your camera allows the device the ability to
activate night vision. Below is an explanation of the features provided in this menu.
•Profile: This dropdown box allows the user to select which profile to modify. The 3 options are Day, Night, and
Normal.
•Mode: This dropdown box allows the user to select whether to turn the IR light on or off. Auto can also be set to
automatically set the camera’s IR lights on and off based on Day & Night conditions. This setting is usually set by
default within the camera.

20
To reset to default settings, click the Reset Defaults button. To refresh the screen, click on Refresh. To save the
settings, click the Save button.
Profile Management
Below is a screenshot that shows the Profile Management tab in the Configuration menu item:
Below is an explanation for each of the fields on the Profile Management tab in the Configuration menu item:
Profile Management: This set of radio buttons allow the user to set what basis the profile management settings
run on. There are 4 options: General, Full Time, Schedule, and Day/Night. General means that the system can
automatically alternate between night and day based on the profiles for each.
Full Time means that the system sticks to one profile the entire time it is running. Schedule allows the user to
dictate which times of the day are designated for the day profile and the night profile. Day/Night means that the
system maintains one profile (Day or Night) for each mode set by the user.
To reset to default settings, click the Reset Defaults button. To refresh the screen, click on Refresh. To save the
settings, click the Save button.
Video
This section allows the user to change video settings for the camera’s video feed. There are 4 tabs in this menu
item: Video, Snapshot, Overlay, and Path.
Video
Below is a screenshot that shows the Video tab in the Video menu item: