American Pro Audiolab TA-212A User manual

USER MANUAL
Dual 12” Active Subwoofer
All manuals and user guides at all-guides.com
all-guides.com

1
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Read the instruction fore using this product.
Pay attention to all warnings.
Obey all operating instructions.
Do not expose this product to rain or moisture.
Do not block any ventilation openings. Install according to instructions .
Do not install this product near any heat source, such as , heater, burner, or any other equipment with heat radiation .
Only use spare parts by manufacturer.
Pay attention to the safety symbol on the of the cover.
manual
Please keep this manual for future reference
Clean this equipment with a dry cloth.
manufacturer's
a
supplied the
outside
SAFETY INSTRUCTIONS
PLEASE READ THIS MANUAL FIRST
Thank you for a buyin ate the system properly.
for future reference.
g an
WARNING:
This product must be installed by professionals. When using hanging brackets or rigging other than those supplied with
the product, please ensure they comply with the local safety codes.
The exclamation point within an equilateral triangle is intended to alert you to the presence of important
operating and servicing instructions.
ATTENTION: Don' rts without being authorized as this will .void the warranty
WARNING: Don't (such as candles) the equipment.place nak close to
Please keep this manual
All manuals and user guides at all-guides.com

2
4
5
3
3
3
3
4
5
5
6
6
6
7
CONTENT
Features
Description
Applications
Frequency Response and Impedance Curve
AMPLIFIER MODULE
INSTALLATION
Mounting Accessories
Installation Reference
INTRODUCTION
Technical Sheet
2D Dimension
TECHNICAL SPECIFICATION
Amplifier Module
Product information is subject to change without
prior notification. Please visit www.audiolab-web.com
for latest updates.
All manuals and user guides at all-guides.com

3
TA-212A
Dual 12" Active Subwoofer
Computer aided design to optimize frequency and
phase response.
Frequency response range: 31.5Hz-150Hz (-3dB).
MAX.SPL 135dB/141dB(PEAK).
Rated power 2000W.
Features
Description Applications
Small Auditorium
Multifunctional Hall
Disco Hall
Small Performance
Karaoke Room
Performance enhanced with built-in DSP.
New generation Class D amplifier, durable and reliable.
TA-212A is a compact LF active wooden speaker . It is
used in middle to large size venues demanding high SPL
and reliability. It helps building perfect playback system
cooperating with TA Series full range products.
Band-pass design helps TA-212A perform high SPL with small
volume. The driver uses high powered 100mm diameter
voice coil which is wrapped by copper wires outside. Voice
coil Skelton is made of TIL material that improves the
tolerance of voice coil power suffering. Ferrite magnetic
circuit provides very high BL and line magnetic circuit.
Power compression reduces by good heat radiating
performance and harmonic distortion also does so by iron
choking ring limiting current.
TA-212A is good for carnival and permanent installation
benefiting from its multifunctional structure design.
Laminated board from China, painted with polyurethane,
guarantees its super weather resistance. Two stand rackets,
8*50mm rubber feet and caster rigging points are attached
to the loudspeaker, which provides convenient installation,
stacking and removal.
.
.
.
INTRODUCTION
All manuals and user guides at all-guides.com

4
1 2 5
3 4 6
7
8
11
9
10
12
13
14
RoHS ON
OFF
POWER
MODE SYSTEM
LINE OUT ALINE IN A
VOLUME
9 dB
LINE OUT B
LINE IN B
PWR SIG CLIP
T10a T12a
T15a
S/N :
WA R NI NG - P L E A S E FO L L O W
TH E IN S T R U C T I ON S S U P P L I E D
WI T H T H E LO U DS PE AK E R .
DO N OT S US P E ND O V E R HE A D.
Made In PRC
0 dB
+
AMPLIFIER MODULE
13. Protection fuse
Use only fuse of the correct amp rating.
14. Power supply input
Make sure that the voltage is set for
your country's correct voltage.
7. Line/microphone input A
8. Line/microphone output A
9. Line input B
10. Line output B
11. Power ON/OFF switch
12. Volume control
1. T10a mode
2. T12a mode
3. T15a mode
4. Power indicator
5. Signal indicator
6. Clip indicator
Attention :Before changing the MODE switch, please
power the speaker off to avoid possible damage.
Amplifier Module
All manuals and user guides at all-guides.com

5
INSTALLATION
Mounting Accessories(Optional) Installation Reference
1. Stack A
2. Stack B
2. Mobile Caster
Caster: φ100 *34mm 4 pcs
Screws: M8 *30 Hexagon 16 pcs
Spring washers: φ8 (Black) 16 pcs
Flat washers: φ8 (Black) 16 pcs
PE bag: 4 pcs
Carton: 1 pc
Warning:
safety factor not less than 5:1 or meet the local
standard during installation .
Make sure the mounting accessories
1. Speaker stand
All manuals and user guides at all-guides.com
all-guides.com

6
460×520×720mm(18.1×20.5×28.4in)
630×580×850mm(24.8×22.8×33.5in)
70
80
90
100
110
120
dB
20 50 100 200 500 1k 2k 5k 10k 20k
-180.0
-108.0
-36.0
36.0
108.0
-180.0
Deg
TECHNICAL SPECIFICATION
Specification
Frequency response curve
42.0kg(92.4 lb)
45.0kg(99.0 lb)
Frequency response(-3dB):
Max.SPL:
Transducer:
Input:
Connector:
Input impedance(line):
Input level:
Input overloading level:
Wire connection:
Heat radiation:
Power cable:
31.5Hz-150kHz
135dB
2 12" Woofer×
Channel one (Mic/Line) balanced input
XLR for input, XLR for output
≥20Kohm
Maximum input level 8 V peak
pin 1: ground; pin2: signal +; pin3: signal -
Forced air-cooled drives
IEC 3 pin power connector
Safety voltage range:
Amplifier power output:
Cabinet:
Handle:
Painting:
Cabinet dimension(W D H):× ×
Packing dimension :(W×D×H)
Net weight:
Gross weight:
AC 220V-240V~50/60Hz
2000W
Powered coated grill
Flying/ Mounting accessories：
Rated impedance: 4 Ohms
T10a mode
T12a mode
T15a mode
2×Iron handle
Fixed supporting base
Plywood
470mV±10%(60Hz/ /T12a Mode)Rated output power
All manuals and user guides at all-guides.com

7
520mm
(20.5in)
460mm
(18.1in)
720mm
(28.4in)
Top view
Front view
Side view Back view
Bottom view
2D Dimension
TECHNICAL SPECIFICATION
All manuals and user guides at all-guides.com

Notes:
All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com