Amerimax Snap-In Gutter Filter none User manual

Gutter guards
are installed on rain gutters to
help prevent leaves, twigs and
other debris from falling into the
gutters and clogging both the
gutters and downspouts.
Obstructed gutters and down-
spouts will prevent rain water
and melting snow from fl owing
through the gutter system.
Water that cannot fl ow freely
can back-up and overfl ow the
gutter causing damage to the
landscaping and the foundation.
Damage to the roof line and the
fascia board may also occur if
water gets behind the gutter.
See the full line of Amerimax
rain carrying products at a home
center, hardware store or whole-
sale distributor near you.
Snap-In Filter
Helps Keep Leaves and Debris Out of Gutters.
• I nstall in seconds by snapping on to front
edge of gutter.
• H andy 3 foot sections fi t standard “K” style
aluminum, steel or plastic gutters.
• Made of high quality, rigid PVC.
• Snap-In design will not collapse under debris.
• 50 guards needed for average home.
• A vailable in white or brown (Fits 4”, 5” &
6” Gutters).
Installation
Simple.
Simply slides under the shingles
and hooks to the front edge of the
gutter. No special tools required.
5.14.08
www.amerimax.com
800-347-2586