AMG 2031 User manual

www.amgsystems.com
AMG2031
amgsystems.com
AMG Systems Ltd. 3 The Omega Centre, Stratton Business Park, Biggleswade, Bedfordshire, SG18 8QB, UK
T :: [phone] E :: [email protected]
D33275-00
AMG2031
1U 3-Slot Rack
Installation Manual - Hardware
19INCH RACK MOUNT INSTALLATION
①Secure the unit into the 19inch
rack using four cage nuts (not
supplied).
Proud to be a British
Manufacturer
To access more information for this product please
visit the product page using the QR code opposite or
the direct link below:
amg-support.com/AMG2031

AMG2031 INCLUDED ACCESSORIES
AMG2031 1U Chassis
INSTALLING CARDS INTO THE AMG2031 RACK
①Slide the card into the
desired slot using the
metal guides as shown.
②Ensure the unit
connects rmly into
the power connector
on the rack backplane.
③Secure the unit into the
slot using the two xing
screws on the front panel.
LED INDICATORS
LED Colour Description
POWER 1 Blue DC input present on power 1
POWER 2 Blue DC input present on power 2
1 x AMG2002 Power Supply
& Region Specic Mains Lead*
* 1 Power Supply Is Included. For Dual Redundant Operation A Second Power Supply Should Be Ordered
POWER 2
POWER 1
POWER
POWER 2
POWER 1
+ +
- -
Power 1
Power 2
Fault Relay
60V @ 2A Max
Fault relay is normally closed and
will open on either power failure.
If used with a single PSU, the PSU
should be wired to both power inputs.
Card Types Voltage
AMG250/350 10-36 VDC
AMG5000 Series 12-15 VDC
Warning
Do not exceed the rated
voltage Refer to voltage table