HOT PLATE USER MANUAL
IMPORTANT SAFETY INSTRUCTIONS
•Read the manual carefully before use.
•If the supply cord is damaged, it must be replaced by the manufacturer or
its service agent or a similarly qualified person in order to avoid a hazard.
•Under no circumstances must the appliance be placed immersed in water
or other liquid, or come into contact with such. Do not use the appliance
with wet or moist hands.
•Before connecting of the appliance check that voltage indicated on the
rating label corresponds the mains voltage in your home.
•It’s advised no continuous operation more than 1 hour each time for
longer product life.
•Do not use the appliance outdoors.
•Use the appliance only for the intended purpose.
•Always remove the plug from the power supply whenever the appliance is
not in use, before cleaning the appliance or whenever a disturbance
occurs. Switch off the appliance beforehand. Pull on the plug, not on the
cord.
•In order to protect children from the dangers of electrical appliance shock,
never leave them unsupervised with the appliance. When selecting the
location for your appliance, do so in such a way that children do not have
access to the appliance. Take care to ensure the cord does not hang down.
•Test the appliance and the cord regularly for damage. If there is damage
of any kind, the appliance should not be used.
•Keep the appliance and the cord away from heat and moisture.
•Never leave the appliance unsupervised. Switch off the appliance
whenever you are not using it, even if this is only for a moment.
•Should If the appliance become moist or wet, remove the mains plug
from the power supply immediately.
Page 2 of 4
SAVE THIS INSTRUCTION
HOW TO USE
•Place the appliance on a flat, dry and heat-resistant surface.
•Turn the temperature knob to “OFF” position.
•Put the plug into the power supply.
•Switch on the appliance by turning the switch knob to “MIN” position
and the temperature knob to the desired setting. The appliance cycle on
and off to maintain the setting temperature. The pilot light goes on when
the appliance is working.
•The appliance will be very hot. DO NOT touch the surface while in use or
it has not cooled down completely.
•Unplug the appliance when not in use and let it cool down.
CAUTIONS
•DO NOT use unstable pan. Use pan with flat bottom to insure full contact
with the hot plate for maximum heat efficiency.
•Avoid dropping any liquid on the plate for long-life performance.
CLEANINGAND MAINTENANCE
•Always unplug from wall socket before cleaning.
•Never immerse the appliance, cord or plug in water or other liquids.
•Clean the outside with a damp cloth. Use washing-up liquid in case of
hard stains.
•Do not use scratching cleaning agent.
Page 3 of 4
