AMPD IGNT-2 User manual

USER MANUAL
PORTABLE SPEAKER
& AMPLIFIER

Safety Instrucons
Important Safety Instructions ..........2
Geng to Know the IGNT-2
What’s in the Box ...........................4
Getting to Know the IGNT-2...........4
Powering and Charging the IGNT-2
Powering and Charging ...................6
Battery Life Indication ......................7
Standby Instructions.........................8
Connecng the IGNT-2
Making a Bluetooth Connection .....9
NFC Pairing.....................................10
Pairing Two IGNT-2 Speakers ..........11
Connecting a Guitar or
Microphone....................................12
Tuning and Storing FM Radio Staons
Manual Tuning ...............................13
Automatic Tuning...........................13
Storing FM Radio Stations...............14
USB Charging
USB Charging .................................14
Night Light Operaon
Night Light Operation .....................15
Making EQ Adjustments
Making EQ Adjustments .................15
Having Issues with the IGNT-2?
Having Issues? ................................16
Specicaons
IGNT-2 Specifications......................17
Warranty
IGNT-2 Warranty.............................18
TABLE OF CONTENTS

IGNT-2 User Manual Page 2
IMPORTANT SAFETY INSTRUCTIONS
Make this instruction manual easily acces-
sible to all users at all times. Always include
this instruction manual when passing the
product on to third parties. Please retain
manual for all future use.
Use the product with care and store it in a
clean dust free environment. Turn off the
speaker after use to conserve battery power.
Only use the supplied accessories supplied
with the speaker.
Keep out of reach of young children. This
apparatus is not suitable for use by young
children or infirm persons without supervi-
sion. Young children must be supervised
to ensure that they do not play with the
apparatus.
DO NOT block any ventilation openings.
Install in accordance with any specific
manufacturer’s instructions. Always allow a
sufficient gap around the apparatus to avoid
overheating.
WARNING! Do not place near any naked
flame source, such as lighted candles on the
electrical apparatus.
Symbols
The lighting bolt with an arrowhead within an
equilateral triangle is intended to alert the user to
the presence of uninsulated ‘dangerous voltage’
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
To reduce the risk of electric shock, DO NOT remove
cover or back. No user serviceable parts inside. Refer
servicing to qualified service personnel.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
Please read this instruction manual carefully and completely before using the
product, and retain for future use.

IGNT-2 User Manual Page 3
For household use only, this apparatus is not
intended for commercial use.
DO NOT attempt to service this apparatus.
This apparatus requires specialist servicing
and knowledge to retain the safety of the
apparatus.
WARNING! Do not insert any objects into
any openings of the electrical appliance
DO NOT place near any heat source such as
radiators, gas heaters, stoves or other heat-
ing apparatus.
AVOID any exposure to direct heat or direct
sunlight.
Unplug this apparatus during lightning
storms or when unused for long periods of
time.
Do not leave the speaker on charge for
extended periods of time.
Electrical and electronic appliances contain
materials and substances which, if handled
or disposed of incorrectly, could be poten-
tially hazardous on the environment and
human health.
Observe any local regulations regarding the
disposal of electrical consumer goods and
batteries and dispose of it appropriately.
No liability will be accepted for any personal
injury or damage caused by failure to follow
these instructions.
This product contains materials that should
not be disposed of with your household
waste. Instead, it is your responsibility to dis-
pose of your waste equipment by handing it
over to a designated collection point for the
recycling of waste electrical and electronic
equipment. The separate collection and
recycling of your waste equipment at the
time of disposal will help conserve natural
resources and ensure that it is recycled in a
manner that protects human health and the
environment.
IMPORTANT! IPX4 Water Resistant Rating.
IPX4 offers protection from a splash of
water.
IMPORTANT! This product is NOT
waterproof. Do not submerge this product
in water.
This product is not protected from strong
ingress of water.
WARNING! Connect to a suitable 230-240V
~ 50 Hz power supply only. If a class 1
product it must be connected to a suitably
earthed mains socket.
Do not abuse or damage a power cord.
If any power cord is damaged, it must be
replaced by the manufacturer, its service
agent or a similarly qualified person in order
to avoid a hazard. A replaceable cord must
be replaced with an authorised replacement
from an authorised service agent only.
IMPORTANT SAFETY INSTRUCTIONS

IGNT-2 User Manual Page 4
WHAT’S IN THE BOX
Please check that all appropriate accessories have been supplied. The IGNT-2 includes the
following:
• IGNT-2 Speaker and Amplifier
• Power Cable
• Cable Storage Bag
• User Manual
• Quick Start Guide
GETTING TO KNOW THE IGNT-2
231
4
5
6
7
8
1
1. White LED lights
2. USB Ports
3. LED Interface
4. Source Select Button
5. Bluetooth Button
6. Light Switch
7. FM Radio Presets / EQ Presets
8. Volume Control Knob

IGNT-2 User Manual Page 5
GETTING TO KNOW THE IGNT-2
10
11
12
13
14
9
9. Handle
10. Telescopic Pull-Up Handle
11. Battery Level Indication Lights
12. Power ON / OFF Switch
13. AC Outlet
14. Wheels

IGNT-2 User Manual Page 6
POWERING AND CHARGING THE IGNT-2
Power Connection
1. Connect the AC cable included with the IGNT-2 to AC power input on the side
of the unit.
2. Connect the AC plug to the appropriate 230-240V~50 Hz wall outlet.
3. Press the ON / OFF switch on the side panel of the speaker.
When you speaker is on LOW Battery the Low LED will flash red.
IMPORTANT: Please only use the AC cable supplied with the unit.
ON / OFF Switch
Power Input
Charging the IGNT-2
The IGNT-2 will automatically begin charging when you connect the AC cable to the
side of the speaker and plug it into an appropriate 230-240V~50 Hz wall outlet.
For first time use we recommend charging your the IGNT-2 for a minimum of 8-10
hours before using.

IGNT-2 User Manual Page 7
Battery Life Indication
When the IGNT-2 is not connected to mains power, you can check its battery life by
pressing the battery indicator button on the side panel of the speaker.
When the IGNT-2 is on low battery, the Low LED will flash red.
POWERING AND CHARGING THE IGNT-2
Battery Level Indicators

IGNT-2 User Manual Page 8
STANDBY INSTRUCTIONS
There is a main power switch on the IGNT-2 which will power the IGNT-2 speaker ON / OFF.
The IGNT-2 also has Standby ON / OFF function.
Turning Standby ON / OFF
To turn Standby ON / OFF, push down on the main volume knob. When in standby mode
the green LED light will remain a constant green.
Auto Standby
When there is no interaction with the speaker for 15 minutes, the speaker will automatically
go to Standby Mode. To exit Standby Mode, press and hold the main volume knob for 1
second.
Volume Knob

IGNT-2 User Manual Page 9
MAKING A BLUETOOTH CONNECTION
Bluetooth Technology allows you to wirelessly pair music to your IGNT-2 speaker using a
Bluetooth enabled device such as tablet or mobile phone.
Please ensure your selected device is Bluetooth compatible before selecting your device to
pair to the IGNT-2 speaker.
Manual Bluetooth Pairing
1. Ensure the IGNT-2 speaker and selected Bluetooth device are no more than 3 feet
apart for the initial connection.
Note: Once connected, you can increase this distance up to 10 metres.
2. On the top panel of the IGNT-2, press the source button until ‘BT’ is displayed on LED
screen.
3. Press the Bluetooth button on the top panel to enter Bluetooth Pairing Mode.
When your IGNT-2 is in Bluetooth pairing mode, the Bluetooth LED will flash blue.
4. Search your Bluetooth-enabled device for IGNT-2 and connect.
Note: If your device requires a password, please use ‘0000’
5. Once a connection is established, the IGNT-2 will indicate that it is connected and the
Bluetooth LED will remain a constant blue.
Source Button Bluetooth Button

IGNT-2 User Manual Page 10
NFC Pairing
NFC or Near Field Communication enables pairing of two devices by simply bringing your
NFC enabled device within centimetres of the NFC area on the IGNT-2.
1. Turn on the NFC function on your selected device.
2. Place your NFC-enabled device on the symbol ‘NFC’ on top of the IGNT-2 speaker.
3. Once a connection is established, the Bluethooth LED light will remain a constant blue.
MAKING A BLUETOOTH CONNECTION
NFC symbol

IGNT-2 User Manual Page 11
PAIRING TWO IGNT-2 SPEAKERS
The IGNT-2 is equipped with a technology called TWS (True Wireless Stereo) that allows you
to dual pair two IGNT-2 speakers together wirelessly. This wireless dual pairing will provide
you with true 2.0 stereo (left and right) audio.
IMPORTANT
• Dual pairing is only available in Bluetooth mode.
• You need two IGNT-2 speakers to dual pair. You cannot wirelessly dual pair with other
AMPD models or other branded products.
To set up dual pairing between two IGNT-2 speakers, please follow these steps:
1. Switch the source to BT mode; the blue LED indicator will flash and start to search the
Bluetooth device. The blue LED indicator stops flashing and becomes a solid blue light
when connected with Bluetooth device successfully. (Refer to Bluetooth instructions for
full instructions).
2. Short press TWS button on the IGNT-2 unit which is connected with Bluetooth device.
When in TWS mode, the blue LED will remain stable and the red LED will flash.
3. Short press TWS button of the second IGNT-2 which is NOT connected with your
Bluetooth device. In TWS mode, the red LED indicator will fast flash and blue LED
indicator light is OFF.
4. After about 10 seconds, the red and blue LED indicator will be solid on the unit
connected to the Bluetooth device. The red LED indicator light will be a solid red on the
IGNT-2 which is not connected to the Bluetooth device.
5. To disconnect the two IGNT-2 speakers, short press the TWS button and the two units
will disconnect.
Connect via Bluetooth
Dual Pair

IGNT-2 User Manual Page 12
CONNECTING A MICROPHONE OR GUITAR
You can connect a guitar and / or microphone to your IGNT-2 speaker directly through the
Microphone and Guitar inputs on the top panel.
Microphone and Guitar Input: 6.5mm
Gain and Echo can be controlled through the individual knobs located on the top panel of
the IGNT-2.

IGNT-2 User Manual Page 13
Use to tune FM Radio Stations
Source Button
Manually Tuning an FM Radio Station
1. Press the SOURCE button to select FM source.
2. Short press the buttons on the top panel of the IGNT-2 speaker to
manually tune FM radio stations and find your desired frequency.
3. Move the IGNT-2 to find the ideal reception for your selected station / frequency.
TUNING AND STORING AN FM STATION
Automatically Tuning an FM Radio Station
1. Press the SOURCE button to select FM source.
2. Press and hold the buttons to automatically tune the next and strongest
radio station signal.

IGNT-2 User Manual Page 14
TUNING AND STORING AN FM STATION
Storing an FM Radio Station
1. Press the SOURCE button to select FM source.
2. Automatically or manually tune your desired frequency / station.
3. Press and hold a number key (1-6), the corresponding number will blink on the display
and the station will be stored.
FM Radio Station Presets
USB CHARGING
The IGNT-2 has a built-in power bank that allows you to charge device(s) from either of the
two USB ports on the top panel. The combined output of the two USB ports is 2.1 Amps.
Connect a USB cable (not included) to one of the two USB ports, and connect your device to
begin charging.
IMPORTANT
• Please take note of the required USB port specification for charging of particular
devices. 2.1A is the combined output of the two USB ports.
• The USB ports are only intended for USB charging - they are not intended for USB
media playback.

IGNT-2 User Manual Page 15
The IGNT-2 is equipped with white LED lights to help with use in dark environments or
at night.
Press the button on the top panel to turn on the lights. This will automatically switch
on to the lowest brightness level.
There are 4 levels of brightness. Press the to select the desired brightness.
NIGHT LIGHT OPERATION
Manual EQ Adjustments
The IGNT-2 sound performance can be adjusted through bass and treble controls located on
the top panel of the speaker.
Press the BASS / TREBLE button to enter BASS and adjust using the main volume control.
Press the BASS / TREBLE button again to enter TREBLE and adjust using the main volume
control knob.
MAKING EQ ADJUSTMENTS
Bass / Trouble Button
EQ Presets
When in Bluetooth mode, or if you have a device connected via AUX, you can set the
IGNT-2 to any of the EQ Presets by pressing the 1-6 keys.
1 Normal
2Jazz
3Rock
4 Pop
5Classical
6 Default

IGNT-2 User Manual Page 16
HAVING ISSUES WITH THE IGNT-2?
No Power
1. Check that the AC power cord is securely inserted to the side AC Power Input on the
side of the IGNT-2 speaker.
2. Check the mains power switch is turned to the ON Position.
3. Ensure there is charge left in the battery.
No Sound
1. Make sure the device connected by AUX cable to the IGNT-2 has the volume set to a
reasonable level.
2. Make sure the device connected by Bluetooth has the volume set to a reasonable level.
3. Ensure there is substantial charge left in the battery of the device connected as well as
the IGNT-2 speaker.
4. Ensure any direct line connection (AUX, MIC, GUITAR) to the IGNT-2 speaker are
secure and connected properly.
Cannot Tune a Desired FM Radio Station
1. Check regional FM stations to ensure your selected station is available.
2. Move your speaker to an open space and adjust position of speaker for ideal reception.
Cannot Pair to the IGNT-2 Speaker via Bluetooth
1. Make sure both Bluetooth device and the IGNT-2 speaker are not connected to any
other Bluetooth devices.
2. Make sure the blue LED is in pair state (the blue LED will flash blue if it is in
pairing state).
3. Turn main power switch OFF, and then turn ON again. Press and hold Bluetooth button
to reach pairing state and try again.

IGNT-2 User Manual Page 17
SPECIFICATIONS
Input Sources Bluetooth / AUX / FM / Microphone / Guitar
Bluetooth Range 8-10 metres (no obstacles)
Power Input 230-240V ~ 50Hz
Product Dimensions 42.4 x 52.3 x 22.9 cm
Approx Weight 9.5kg
Output USB (5V/2.1A)

IGNT-2 User Manual Page 18
AMPD WARRANTY
At AMPD, we believe in our products and manufacture to the highest standards.
Should your product have a fault caused by the manufacturer, we will happily replace or
refund for up to 2 years from the date of purchase.
All benefits of the AMPD Manufacturer’s Warranty are in addition to your rights under New
Zealand and Australian Consumer Law. Our goods come with guarantees that cannot be
excluded under New Zealand and Australian Consumer Law. You are entitled to a
replacement or refund for major failure and compensation for any other reasonable
foreseeable loss or damage.
This Warranty is limited to the replacement or refund under the Warranty Period of 2 years
from the date of purchase. It does not extend to any damage to the product including but
not limited to: power surges, incorrect installation, insect infestation, commercial use,
improper transit or failure to use the product in accordance with the operating instructions.
At AMPD, we are always happy to help and discuss any issues or faults that you may have
experienced with your product.
For all AMPD product enquiries, please call:
Australia Freephone 1800 161 454
New Zealand Freephone 0800 89 85 80
In the instance your enquiry cannot be resolved over the phone, please take your Proof of
Purchase along with your product to the original place of purchase.
Oriental Pacic Internaonal Ltd
PO Box 302 158, North Harbour, Auckland, New Zealand
service@orientalpacic.com