AMPTRON DeskNote A928 User manual

900001
i

Preface

Copyright 2002
All Rights Reserved.
Manual edition, January 2002
The information in this document is subject to change without prior notice in
order to improve reliability, design and function and does not represent a
commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental,
or consequential damages arising out of the use or inability to use the product
or documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All
rights are reserved. No part of this manual may be reproduced by any
mechanical, electronic, or other means in any form without prior written
permission of the manufacturer.
Trademarks
AutoCAD and Autoshade are trademarks of Autodesk, Inc. IBM, OS/2, and
VGA are trademarks of International Business Machines Corp. Lotus, 1-2-3,
and Symphony are trademarks of Lotus Development Corp. Windows, Word,
MS-DOS, and Microsoft are trademarks of Microsoft Corp. VESA is a
trademark of Video Electronics Standards Association.
Other product names mentioned herein are used for identification purposes
only and may be trademarks and/or registered trademarks of their respective
companies.
Limitation of Liability
While reasonable efforts have been made to ensure the accuracy of this
manual, the manufacturer and distributor assume no liability resulting from
errors or omissions in this manual, or from the use of the information contained
herein.
ii

This page is intentionally blank
iii

Table of Contents
iv

Notices
Federal Communications Commission Radio Frequency
Interference Statement
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and if not
installed and used in accordance with the instruction manual may
cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio TV technician for help.
Notice:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. Shielded
interface cables and a non-shielded AC power cord must be used in order to
comply with emission limits. This equipment is to be used with power supply:
Rated input 100-240 Vac, 50-60 or 47-63Hz, 2.0A maximum; output 19 Vdc,
4.7A min., 90W min. There is no internal power supply.
v

Canadian DOC Notice For Class B Computing Devices
This Class B digital apparatus meets all requirements of the Canadian
Interference - Causing Equipment Regulations. Cet appareil numerique de la
classe B repecte toutes les exigences du Règlement sur le matèriel brouilleur
du Canada.
Safety Precautions
This section is designed to assist you in identifying potentially unsafe conditions
while working with this product. Required safety features have been installed in
the computer to protect you from injury. However, you should use good
judgment to identify potential safety hazards:
Please read these safety instructions carefully.1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Please keep this User's Manual for later reference.
Please disconnect this equipment from AC outlet before cleaning.
Don't use liquid or sprayed detergent for cleaning. Use moisture
sheet or cloth for cleaning.
For pluggable equipment, that the socket-outlet shall be installed
near the equipment and shall be easily accessible.
Please keep this equipment from humidity.
Lay this equipment on a reliable surface when isntall. A drop or fall
could cause injury.
Make sure to use the right voltage for the power source when
connecting the equipment to the power outlet.
Place the power cord in such a way that people can not step on it.
Do not place anything on top of the power cord.
All cautions and warnings on the equipment should be noted.
If the equipment is not use for a long time, disconnect the equipment
from the main power outlet to avoid being damaged by transient
overvoltage.
Never pour any liquid into the opening, this could cause fire or
electrical shock.
vi

12.
13.
a.
b.
c.
d.
e.
f.
14.
15.
16.
17.
Never open the equipment. For safety reason, the equipment
should only be opened by a qualified service personnel.
If on the following situations arises, get the equipment checked by a
service personnel:
The Power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment has not work well or you cannot get it work
according to the user's manual.
The equipment has dropped and damaged.
If the equipment has obvious sign of breakage.
Do not leave this equipment in an environment unconditioned,
storage temperature above 60°C (140°F), it may damage the
equipment.
The unit can be operated at an ambient temperature of max. 35°C.
The sound pressure level at the operators position according to IEC
704-1: 1982 is equal or less than 70 dB(A).
Power Cord Requirements
The power cord set used with the AC adaptor must meet the
requirements of the country where you use the AC adaptor, whether
it is 100-120 or 200-240 Vac. The following information explains the
requirements for power cord set selection.
 The cord set must be approved for the country in which it is
used.
 The appliance coupler must have a configuration for
mating with a CEE22/EN6032/IEC 320 appliance inlet.
A. For U.S. and Canada:
 The cord set must be UL Listed and CSA Certified.
 The minimum specifications for the flexible cord are No. 18
AWG.
B. For Japan:
vii

 All components of the cord set must bear a “ T ” mark and
registration number in accordance with the Japanese
Dentori Law.
 The minimum specifications for the flexible cord are .75m
㎡conductors.
C. For Other Countries:
 The cord set fittings must bear the certification mark of the
agency responsible for evaluation in a specific country.
 The flexible cord must be of a HAR (harmonized) type
H05W-F.
 The cord set must have a current capacity of a least 2.5
Amperes and voltage rating of 125 or 250 Vac.
When using your telephone equipment, basic safety precautions
should always be followed to reduce the risk of fire, electric shock
and injury to persons. These precautions includes the following:
18.
1. Do not use this product near water, for example, near a bathtub,
wash bowl, kitchen sink or laundry tub, in a wet basement or
near a swimming pool.
2. Avoid using a telephone (other than a cordless type) during an
electrical storm. There may be a remote risk of electric shock
from lightning.
3. Do not use the telephone to report a gas leak in the vicinity of
the leak.
4. Use only the power cord indicated in this manual.
Wichtige Sicherheitshinweise
1.
2.
3.
4.
Bitte lesen Sie diese Hinweis sorgfältig durch.
Heben Sie dirse Anleitung für den späteren Gebrauch auf.
Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen.
Versenden Sie Keine Flüssig- oder Aerosolreiniger. Am besten
eignet sich ein angefeuchtetes Tuch zur Reinigung.
Die Netzanschluβsteckdose soll nahe dem Gerät angebracht und
leicht zugänglich sein.
viii

Das Gerät ist vor Feuchtigkeit zu schützen.5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten.
Ein Kippen oder Fallen könnte Beschädigungen hervorrufen.
Beachten Sie beim Anschluß an das Stromnet die Anschlußwerte.
Verlegen Sie die Netzanschlußleitung so, daß niemand darüber
fallen kann. Es sollte auch nichts auf der Leitun abgestellt werden.
Alle Hinweise und Warnungen, die sich am Gerät befinden, sind zu
beachten.
Wird das Gerät üeinen längeren Zeitraum nicht benutzt, sollten Sie
es vom Stromnetz trennen. Somit wird im Falle einer Überspannung
eine Beschädigung vermieden.
Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder
Flüssigkeien in das Gerät gelangen. Dies könne einen Brand bzw.
Elektrischen Schlag auslösen.
Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der
elektrischen Sicherheit nur von authorisiertem Servicepersonal
geöffnet werden.
Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz
zu trennen und von einer qualifizierten Servicestelle zu Überprüfung.:
Netzlabel oder Netzstecker sind beschädigt.
Flüssigkeit ist in das Gerät eingedrungen.
Das Gerät war Feuchtigkeit ausgesetzt.
Wenn das Gerät nicht der Bedienungsanleitung entsprechend
funktioniert oder Sie mit Hilfe dieser Anleitung keine Verbesserung
erzielen.
Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt.
Wenn das Gerät deutliche Anzeichen eines Defektes aufweist.
VORSICHT: Explosiongsgetahr bei unsachgemäßen Austausch der
Batterie. Ersatz nur durch denselben oder einem vom Hersteller
empfohlenem ähnlichen Typ. Entsorgung gebrauchter Batterien
nach Angaben des Herstellers.
Dieses Schaltnetzteil kann bis zu einer Außentemperatur von
ix

maximal 35ºC.
Die Ausgangswerte dürfen nicht die auf dem Label angegebenen
Werte überschreiten.
22.
23. Anforderungen an das Stromkabel
Das Kabel-Set, das an das Netzteil angeschlossen wird, muss den
Anforderungen des Landes, in dem Sie das Netzteil einsetzen, genügen, je
nachdem, ob die Netzspannung 100-120 oder 200-240V Wechselspannung
beträgt.
 Das Kabel-Set muss für das Land, in dem es eingesetzt
wird, zugelassen sein.
 Der Gerätestecker des Kabels muss in eine CEE22/
EN603/ IEC 320 Buchse passen.
A. Für die USA und Kanada:
 Das Kabel-Set muss UL-gelistet und CSA zertifiziert sein.
 Die Minimalanforderungen für das Kabel entsprechen No.
18 AWG.
B. Für Japan:
 Alle Teile des Kabel-Sets müssen entsprechend dem
japanischen Dentori Law mit einem “T”-Symbol markiert
sein
 Die Minimalanforderungen für das Kabel sind .75m ㎡
Leiter.
C. Für andere Länder:
 Die Zubehörteile des Kabel-Sets müssen das Prüfsiegel
derjenigen Stelle, die in dem jeweiligen Land für die
Sicherheitsprüfung zuständig ist, tragen.
 Das Kabel muss vom HAR (harmonisierten) Typ H05W-F
sein.
 Das Kabel-Set muss eine Stromkapazität von mindestens
2,5 Ampere haben und Spannungen von 125 oder 250 V
Wechselstrom gestatten.
x

Personal Inventory
This DeskNote computer system is designed for years of productive and
pleasurable computing. Use this section to keep notes about details of your
purchase. Update this section when you add new options.
Date of Purchase:
Dealer’s Name:
Phone:
Address:
E-Mail Address:
WWW Site:
Serial Number:
CPU Type:
Hard Disk Capacity:
Memory Capacity:
Optional Equipment:
xi

C
Ch ha ap pt te er r 1 1
Introduction
User's Info: There are more and more people spending large amounts
of time in front of computer monitors now that scientists
from many fields including anatomy, psychology, and
occupational safety are involved in the study of
ergonomically sound work environments.
A few tips to help you work effectively without a lot of physical discomfort:
• Purchase a chair with armrests and good back support. Don't slouch when
sitting; keep your back straight.
• Try to place the LCD panel or external monitor so that there is little glare
from the sun on the monitor.
• Walk around the room every hour.
• Every half hour look away from the computer screen for a few minutes.
• Place everything that you need to work within easy reach.
1

Welcome to the DeskNote Computer
Congratulations on your purchase of the DeskNote computer. Your DeskNote
features the latest advances in portable computing technology. The DeskNote
is designed for those who need the full power of a desktop PC with a modular
design to provide maximum expandability without compromising portability.
The high-performance CPU and enhanced IDE hard drive provide you with
extra processing power for handling complex graphics and running large
programs.
The DeskNote features a factory fixed expansion module; a 5¼" CD-ROM or
DVD-ROM drive.
To keep pace with the accelerated advances in technology, your DeskNote
provides extensive upgrade options, an upgradeable hard disk drive and an
upgradeable DIMM.
Unpacking the DeskNote Computer
The DeskNote comes securely packaged in a sturdy cardboard shipping carton.
If anything is missing or damaged, please contact your DeskNote dealer
immediately.
The shipping carton should contain the following items:
 The DeskNote computer
 An AC/DC adapter
 An AC power cord
 Phone cable
 The User's manual/Software Drivers CD title
Do not throw the packaging materials away. You may need them later if you
have to ship the computer for repairs.
Accessories and Optional Devices
 TV-Out cable
2

 External battery (optional)
Getting to Know Your Computer
Opening the LCD Panel
At the front of the DeskNote you will find a retaining latch on the display panel,
which locks the display in closed position when the DeskNote is not in use.
1.
2.
CAUTION:
Slide the display panel latch and then raise the LCD screen.
At any time you can tilt the display toward or away from you to a
comfortable viewing position.
To avoid damage to the display panel:
1. Try not to slam the display upon closing it.
2. Try not to place any object on top when it is closed or
open.
3. Be sure the system is turned off or in suspend mode before
you close the display panel.
With the LCD screen open, you will see several features important for operating
your DeskNote computer.
3

Each of these features is briefly described below.
LCD Cover Release Latch - Allows you to open the display panel and reveal
the LCD screen and the keyboard.
1
1. .
2
2. .
3
3. .
LCD Screen - Your DeskNote computer is equipped with a replaceable color
Liquid Crystal Display (LCD) screen that supports up to 1024 x 768 LCD
resolution.
System Status Indicator Panel - The system status indicator panel keeps you
informed of the computer’s operating status.
4

HDD - Indicates that the computer is accessing the hard disk
drive.
NumLock - Indicates that the keyboard is in Num Lock mode.
Caps Lock - Indicates when the keyboard is in Caps Lock mode.
In this mode, the keyboard produces uppercase text when you
press a key. When you press the Caps Lock key again, the
indicator goes off and the keyboard produces lowercase text.
Scroll Lock - Indicates when the keyboard is in Scroll Lock mode.
Some applications will move information across the screen
differently when Scroll Lock is on.
4
4. .
5
5. .
6
6. .
7
7. .
8
8. .
9
9. .
1
10 0. .
1
11 1. .
Power/Resume Button - Pressing this button for 1-2 seconds will turn on the
system or pressing this button when the computer is in Suspend mode will
resume normal operation. Pressing this button for 4-6 seconds will also turn
off the system.
TouchPad - The TouchPad is hardware-compatible with the IBM PS/2
mouse and software-compatible with the Microsoft mouse.
TouchPad Buttons - The buttons below the TouchPad correspond to the left
and right buttons on a standard mouse. The PS/2 compatible mouse will
work with the DeskNote TouchPad simultaneously.
Internet Button - Press this button to launch Microsoft Internet Explorer or
your default browser. If you are using Win98SE OS, it is necessary to install
the hotkey driver to fully utilize this function key.
E-Mail Button - Use this key to open the Microsoft's Outlook Express to
send/receive your mail. If you are using Win98SE OS, it is necessary to
install the hotkey driver to fully utilize this function key.
Built-in Speaker - The internal speakers provide true stereo sound.
The Built-in Microphone - The built-in microphone is located to the left of the
TouchPad.
Scroll Button - Use this button to scroll up and down the scrolling bar.
5

The Right Side
1
1. .
2
2. .
CAUTION:
The CD-ROM/DVD-ROM Drive - Your DeskNote comes with a swappable
24X (or higher) 5.25" IDE CD-ROM or 8X DVD-ROM drive.
Modem Port - You will able to connect your computer to your phone line
through this port.
Always disconnect all telephone lines from the wall outlet before
servicing or disassembling this equipment. To reduce the risk of
fire use only No. 26 AWG or larger telecommunication line cord.
3
3. .
4
4. .
USB Ports - Your computer includes four Universal Serial Bus (USB) ports.
USB is the latest development in Plug and Play technology. It will
eventually replace the need for separate connectors for external keyboards,
serial ports, and parallel (printer) port.
Kensington Lock - Your computer includes a keyhole to be used with a
standard Kensington lock. You can connect the DeskNote lock to a large
object with the Kensington lock to prevent theft of your DeskNote.
6

The Left Side
Power LED Indicators
These two LED indicators are separately
programmed for the following functions:
Suspend mode and Power On.
Suspend mode - This indicator will lit when the DeskNote is in suspend
mode.
1
1. .
2
2. .
3
3. .
4
4. .
5
5. .
Power On - This indicator will lit when the DeskNote is powered on.
Cooling Fan Vent - This fan prevents the DeskNote CPU and other internal
components from becoming overheated. Keep this fan unobstructed to allow
proper ventilation to the DeskNote's internal components.
DC IN Connector - Plug the AC adapter into this connector. Refer to
Chapter Two, Connecting to a PowerSource for more information.
1394 USB - A very fast external bus standard that supports data transfer
rates of up to 400 Mbps (400 million bits per second).
Can be used to connect up 63 external devices, also supports isochronous
7

data -- delivering data at a guaranteed rate. This makes it ideal for devices
that need to transfer high levels of data in real-time, such as video devices.
Also supports both Plug-and-Play and hot plugging, and also provides power
to peripheral devices.
The Rear Side
Headphone Jack - This is for headphone output that supports SPDIF output
5.1 channel. You can plug an external headphone into your DeskNote or
connect to SPDIF speaker to enjoy the DVD title.
1
1. .
2
2. .
3
3. .
4
4. .
5
5. .
6
6. .
7
7. .
External Microphone Jack - This mono microphone jack is used to connect
an external microphone.
Infrared Data Port - The Infrared Data Port allows your DeskNote to become
truly wireless. You can use this port to transfer large amounts of data very
quickly to any other machine (DeskNote computers, printers, etc.), which is
also equipped with an IrDA-compliant IR port. This allows you to print
documents without any inconvenient cable hookups.
Parallel Port - This port allows you to easily connect a parallel printer or
plotter using this 25-pin bi-directional female port.
External CRT Port - This port allows you to easily connect an external
VGA/SVGA display monitor into your DeskNote using the 15-pin female
connector.
TV Out Connector - You can connect an external television via the S-Video
TV out connector.
LAN Port - This port provides a standard RJ-45 connection with an existing
network via a network cable.
8