Amumu HotSummer OVERDRIVE User manual

Thanks for purchasing the HOT SUMMER™ - a fully
handmade and very versatile overdrive pedal with two
clipping options of COMPRESSION and NO COMPRES-
SION by COMP/COMPCUT switch, plus the ingeniously
configured TONE control, HOT SUMMER provides a fast
tuning and wide range of overdrive tones that enhance
the natural sound of your guitar and amp sets to offer
you more options of tones when playing and recording.
DESIGNED BY AMUMU IN CHINA

4
5
2
3
1
8
9
6
7
1. LED Indicator
2. Compression Switch
3. Level
4. Output
5. Foot Switch(True-Bypass)
6. Tone
7. Gain
8. Input(Power On)
9. 9V DC Input

CONTROLS
GAIN: This knob adjusts overdrive intensity
LEVEL: This knob adjusts overall volume of effect
TONE: Turn this knob clockwise for more treble response
COMP/COMCUT: COMP for compressed overdrive tone,
COMPCUT for non-compressed overdrive tone
FOOT SWITCH: This toggles effect on ( (red LED on) or
bypass ( red LED off)
CONNECTIONS
INPUT: This is a high-impedance input suitable for
electric guitar, bass, acoustic guitars with pickup
systems, keyboards and other instruments.
OUTPUT: This is a low-impedance output jack that
connects to the amp or to the next effect pedal in the
signal chain.
Input impedance
Output impedance
Current consumption during use
Standard working voltage
Max working voltage
Foot Switch Type
Foot Switch Operating Life Cycle
Foot Switch Manufacturer
Dimensions
Weight
510 kΩ
10 kΩ
10 mA
DC 9V
DC 18V
Hardwired True Bypass
30,000 cycles
Alpha
4.37” x 2.36” x 1.93”
0.5lbs (225g)
Product specifications subject to change without notice
SPECIFICATIONS

SAMPLE SETTINGS
DYNAMIC CLEAN
COMPCUT, TONE=50%,
LEVEL=50%, GAIN=50%
CLEAN BOOST
COMPCUT, TONE=65%,
LEVEL=70%, GAIN=0%
DRIVE BOOST
COMP, TONE=55%,
LEVEL=70%, GAIN=30%
OD SOLO
COMP, TONE=60%,
LEVEL=50%, GAIN=75%

PRECAUTIONS / WARNING
* To prevent malfunction and equipment failure, always turn
down the VOLUME and turn off the power of your amplifier
and other devices before making any connections.
* Once the connections have been completed, turn on power
to your various devices in the following order, otherwise, you
risk causing malfunction and/or damage to speakers and
other devices.
* When powering up: Turn on the power of the amplifier
last.
* When powering down: Turn off the power of the
amplifier first.
* To prevent damage, fire, or shock hazard, do not expose
the unit or its AC power to rain or moisture.
* Do not alter the AC plug of the connected power adapter.
* Do not drip or splash liquids on the unit.
* No user-serviceable parts inside, refer servicing to
qualified personnel only.
* The unit must only be connected to a safety agency
certified, regulated, power source (adapter), approved for
use, and compliant with applicable local and national
regulatory safety requirements.
* Unplug the AC power adapter before cleaning the unit
exterior.
* Use only a damp cloth for cleaning and then wait until the
unit is completely dry before reconnecting it to power.
* Amplifiers and loudspeaker systems, and ear/headphones
(if equipped) are capable of producing very high sound
pressure levels which may cause temporary or permanent
hearing damage. Use care when setting and adjusting
volume levels during use.

EAGLEVOX CORPORATION LIMITED
LEVEL 54, HOPEWELL CENTRE, 183 QUEEN'S ROAD
EAST, WAN CHAI, HONG KONG
Please kindly let us know if you have any questions, advise, or
informations. AMUMU is always hearing from you.
WWW.AMUMU.ROCKS
[email protected]AMUMU.ROCKS