ANBTEK GT08L User manual
Copyright © 2021 Shenzhen ANB Technology Co., Ltd. All rights reserved.
1
Vehicle GPS Tracker
(4G LTE+GSM+GPS+SMS)
GT08L User Manual
(Version 1.)
Copyright © 2021 Shenzhen ANB Technology Co., Ltd. All rights reserved.
2
Index Contents
1. Description...................................................................................................................................... 3
2. Package Contents ........................................................................................................................... 3
3. Features and Specifications.............................................................................................................3
4. Knowledge before Usage................................................................................................................ 4
4.1 Factory Default Setting......................................................................................................... 4
4.2 Power Supply and consumption............................................................................................5
4.3 How to Insert Sim card......................................................................................................... 5
5. Installation....................................................................................................................................... 5
5.1 Wiring Diagram.....................................................................................................................5
5.2 LED working status...............................................................................................................6
6. Device configuration....................................................................................................................... 6
6.1 Device ID.............................................................................................................................. 6
6.2 Configure data(4G/GPRS) Parameter...................................................................................7
6.3 Configure APN......................................................................................................................7
6.4 Configure Authorized Phone Numbers for alarm alerts....................................................... 7
6.5 Time zone Localization Setting.............................................................................................8
6.6 Remote Cut-engine (Immobilizer)........................................................................................8
6.7 Reset Mileage report value................................................................................................... 8
6.8 Tracking parameter setting....................................................................................................8
6.9 Query device setting status................................................................................................... 9
6.10 Query google location link..................................................................................................9
6.11 Recover factory setting........................................................................................................9
6.12 Remote reboot..................................................................................................................... 9
6.13 Set overspeed alarm............................................................................................................ 9
6.14 Setup motion sensitivity threshold....................................................................................10
6.15 Setup ACC association......................................................................................................10
6.16 OTA Operation.................................................................................................................. 10
Copyright © 2021 Shenzhen ANB Technology Co., Ltd. All rights reserved.
3
1. Description
GT08L is a IP67 Rated 4G LTE/GSM/GPS tracker for car, motorcycle, scooters and e-bikes.
It's with superior receiver sensitivity, fast TTFF and 4G LTE design. And it can continuously
report current position to backend server. It has a built-in acceleration sensor, which can detect the
moving/static and driving behavior.
GT08L is developed by "openCPU" technology which brought lower cost, lower power
consumption and fast response speed advantages. It’s reputed with have industrial level
performance but on economical solution pricing.
2. Package Contents
Item
Picture
Remark
Tracker
Standard
Wire harness
Standard
Immobilizer relay
Optional
SOS button
Optional
3. Features and Specifications
Item
Description
Dimension
95*47*18mm
Power range
8-100V DC/1.5A
Working humidity
5%~95%
Operating temperature
‐30℃~75℃
Copyright © 2021 Shenzhen ANB Technology Co., Ltd. All rights reserved.
4
Internal backup battery
120mAh/4.2V
Data transmit
4G LTE/GSM/SMS Communication
LED indicator
1: Red for network
2: Green for GPS
Input
1: ACC detect
2: SOS detect
3: Reserved (high trigger)
Output
Immobilizer(cut engine) relay or buzzer
AD
One input AD
Accelerometer
Built-in accelerometer
4G chip
FIBOCOM L610
4G/GSM frequency
L610-CN
LTE FDD: B1 B3 B5 B7
LTE TDD: B34 B39 B40 B41
GSM:900MHz/1800MHz
L610-LA
LTE FDD: B1 B2 B3 B4 B5 B7 B8 B28 B66
GSM:850MHz/900MHz/1800MHz/1900 MHz
L610-EU
LTE FDD: B1 B3 B7 B8 B20 B8
GSM:850MHz/900MHz/1800MHz/1900 MHz
GPS chip
ZKMICRO:ATGM336H (BDS+GPS)
GPS sensitivity
-160dB
GPS position accuracy
5 Meters
4G/GSM Null zone data storage
2000 Waypoints
Position report
Time based and distance(mileage) based and angle based
Alarm alerts
GEO Fence, speed over, power tamper and SOS(Panic),idle,
harsh acceleration,harsh braking,harsh cornering
Configuration
SMS + computer(USB configurator) + server
OTA
Support
4. Knowledge before Usage
4.1 Factory Default Setting
-IP/Port: Empty
-APN, User and pass: Empty
-Speed Limit: Off=000Km/H
-Position data Update Time Interval: 30Seconds when ignition on, 30seconds when ignition off
-Authorized Phone numbers A/B/C: None
Copyright © 2021 Shenzhen ANB Technology Co., Ltd. All rights reserved.
5
4.2 Power Supply and consumption
This device is expected to connect with a DC power source with range of 8-100V DC.
Working current maximum 2A input.
Device working current < 18mA @24V DC
4.3 How to Insert Sim card
Before inserting the sim card, please make sure the sim card 4G and SMS and GPRS activated.
The device will automatically turn on after inserting the SIM card.
5. Installation
5.1 Wiring Diagram
Wire Color
Remark
Red
Power +(8-100V DC)
Black
Power Ground
White
Ignition Detection(ACC)
Yellow
Cut-off, Digital output
Brown
Door status high input
Blue
Panic(SOS) low input
Copyright © 2021 Shenzhen ANB Technology Co., Ltd. All rights reserved.
6
5.2 LED working status
Item
Color
Working
Status
Network
Red
Off
Power off
On
Cannot recognize sim card
Fast flashing
Registering network
Slow flashing
Successfully registered the network
GPS
Green
Off
GPS off or no GPS data
Fast flashing
GPS positioning
Slow flashing
GPS positioning succeeded
6. Device configuration
GT08L allow user to use SMS Commands to configure necessary parameters.
Details please check as follows instruction.
6.1 Device ID
GT08L doesn’t need configure device ID. GT08L use 121 + the last eight digits of IMEI as ID.
On the unit case side is with a bar code sticker. please use this code as device ID when
you register device tracking platform. Following picture ID is: 12151781737
Copyright © 2021 Shenzhen ANB Technology Co., Ltd. All rights reserved.
7
6.2 Configure data(4G/GPRS) Parameter
SMS Setting Command:
(ip,1,1,url,port,T)
url: IP or domain name of the tracking server.
port: port of the tracking server.
T: data transmit mode. T=1 is using TCP mode. T=0 is using UDP mode. Default as 1.
Example:
(ip,1,1,198.11.175.123,9016,1)
SMS query Command:
(ip,0)
6.3 Configure APN
SMS setting Command:
(apn,1,APN name,APN user name,APN password)
Example 1: APN name is cmnet, APN user name is abc, APN password is 123
(apn,1,cmnet,abc,123)
Example 2: APN name is cmnet, no APN user name and APN password
(apn,1,cmnet,,)
SMS query Command: (apn,0)
6.4 Configure Authorized Phone Numbers for alarm alerts
After the authorized number is set, only the authorized number SMS command is accepted, when
the device detects an alarm (SOS alarm, power failure alarm), it will send SMS to the authorized
number.
SMS setting command:
(auth,1,number1,number2,number3)
Example:
(auth,1,+8613554806820,+8613554806821,+8613554806822)
SMS query Command:
(auth,0)
SMS clear Authorized Phone Numbers Command:
(auth,1,,,)
Copyright © 2021 Shenzhen ANB Technology Co., Ltd. All rights reserved.
8
6.5 Time zone Localization Setting
GT08L can configure the timezone of TCP data and SMS data separately, but TCP data uses GMT
time by default.
SMS setting Command:
(timezone,1,00:00,hh:mm)
hh: mm is SMS data timezone hour and minute.
Example: Setup time zone with 8.
(timezone,1,00:00,+08:00)
SMS query Command:
(timezone,0)
6.6 Remote Cut-engine (Immobilizer)
Wireless cut-off engine SMS command
(cut,1,1)
Wireless disable engine lock status SMS command
(cut,1,0)
6.7 Reset Mileage report value
In every Position data packet to tracking server, GT08L data package includes the current travel
mileage. And the user can by SMS command to reset or adjust the mileage report value.
SMS Command:
(mile,1,xxx)
xxx: mileage, unit is Meter.
Example: reset mileage to 2000 meters
(mile,1,2000)
6.8 Tracking parameter setting
By following SMS command to setup device data update interval in acc on and acc off and angle
change.
SMS setting command:
(uptime,1,acc on time,acc off time,angle change)
acc on time: position update interval when in acc on, unit is second.
acc off time: position update interval when in acc off, unit is second.
Copyright © 2021 Shenzhen ANB Technology Co., Ltd. All rights reserved.
9
angle change: position update when car angle change, unit is degree.
Example: acc on interval is 20 seconds, acc off is 60 seconds, angle change is 30 degree.
(uptime,1,20,60,30)
SMS query command:
(uptime,0)
6.9 Query device setting status
SMS command:
(all,0)
Device reply:
(all,0,apn,0,cmnet,,*ip:0,1,198.11.175.123,9016,1;2,,,*id,0,012151781737*uptime,0,20,
10,30*protocol,0,0*gprs,0,31,6,3,1,2*)
6.10 Query google location link
SMS command:
*WHERE2#
Device reply:
ID:012151781737 http://maps.google.com/maps?hl=en&q=+22.59682,+113.84461
6.11 Recover factory setting
By SMS command or GPRS command, GT08L can be initialized to be factory default setting
status.
SMS Command:
(reset)
6.12 Remote reboot
SMS command:
(reboot,1)
6.13 Set overspeed alarm
SMS setting command:
(speed,1,Overspeed threshold,Overspeed duration)
Example: when overspeed 120km/h and last for 3 seconds trigger over alarm
(speed,1,120,3)
Copyright © 2021 Shenzhen ANB Technology Co., Ltd. All rights reserved.
10
SMS query Command:
(speed,0)
6.14 Setup motion sensitivity threshold
Note: It is not recommended to modify this parameter.
SMS setting command:
(gsensor,1,sensitivity,moving time,static time)
sensitivity: value from 1 to 1000, the larger the value, the less sensitive, default is 100.
moving time: if the movement is greater than the threshold and lasts longer than this time,the
device will be considered to be in motion, unit is second, default value is 1.
static time: if the movement is smaller than the threshold and lasts longer than this time,the device
will be considered to be in static, unit is second, default value is 180.
Example:
(gsensor,1,100,1,180)
SMS query command:
(gsensor,0)
6.15 Setup ACC association
Note: It is not recommended to modify this parameter.
SMS setting command:
(acc,1,input/sensor,lock position)
input/sensor: 1 is ACC by wire harness input. 0 is ACC by G sensor moving status, default is 1.
lock position: 1 is when ACC off location will not change, 0 is when ACC off location will change,
default is 1.
Example:
(acc,1,1,1)
SMS query command:
(acc,0)
6.16 OTA Operation
GT08L allow user to do firmware upgrading via GPRS connection. Details operation
command and procedure, please consult with your seller.
Table of contents
Other ANBTEK GPS manuals
