ANBTEK GT09L User manual

Copyright © 2021 Shenzhen ANB Technology Co., Ltd. All rights reserved.
1
Vehicle GPS Tracker
(4G LTE+GSM+GPS+SMS)
GT09L User Manual
(Version 1.)

Copyright © 2021 Shenzhen ANB Technology Co., Ltd. All rights reserved.
2
Index Contents
1. Description ......................................................................................................................................3
2. Package Contents ...........................................................................................................................3
3. Features and Specifications ............................................................................................................ 4
4. Knowledge before Usage ................................................................................................................5
4.1 Factory Default Setting .........................................................................................................5
4.2 Power Supply and consumption ........................................................................................... 5
4.3 How to Insert Sim card .........................................................................................................5
5. Installation .......................................................................................................................................6
5.1 Wiring Diagram .................................................................................................................... 6
5.2 LED working status .............................................................................................................. 7
6. Device configuration ...................................................................................................................... 7
6.1 Device ID ..............................................................................................................................7
6.2 Configure data(4G/GPRS) Parameter .................................................................................. 8
6.3 Configure APN ..................................................................................................................... 8
6.4 Remote Cut-engine (Immobilizer) ....................................................................................... 8
6.5 Configure Authorized Phone Numbers for alarm alerts .......................................................8
6.6 Time zone Localization Setting ............................................................................................ 9
6.7 Set overspeed alarm ..............................................................................................................9
6.8 Reset Mileage report value ...................................................................................................9
6.9 Reset SMS command password ......................................................................................... 10
6.10 Active sleep mode .............................................................................................................10
6.11 Tracking parameter(location update) setting ....................................................................10
6.12 Voice monitor by SMS ......................................................................................................10
6.13 Query google link ............................................................................................................. 10
6.14 Reboot device ................................................................................................................... 11
6.15 Recover factory setting ..................................................................................................... 11
6.16 Setup vibration and Arm ...................................................................................................11
6.17 Setup towing alarm ........................................................................................................... 11
6.18 Query parameters ..............................................................................................................11
6.19 Setup DLT card type ......................................................................................................... 11
6.20 Setup DLT card ID ............................................................................................................12
6.21 Setup DLT buzzer time .....................................................................................................12
6.22 OTA Operation ..................................................................................................................12

Copyright © 2021 Shenzhen ANB Technology Co., Ltd. All rights reserved.
3
1. Description
GT09L is a IP67 Rated 4G LTE/GSM/GPS tracker for car, motorcycle, scooters and e-bikes.
It's with superior receiver sensitivity, fast TTFF and 4G LTE design. And it can continuously
report current position to backend server.
It has a built-in acceleration sensor, which can detect the moving/static and driving behavior and
detect ignition state and SOS alarm and use microphone for real time voice monitoring and R232
for RFID reading and stop engine by remote.
GT09L is developed by "openCPU" technology which brought lower cost, lower power
consumption and fast response speed advantages. It’s reputed with have industrial level
performance but on economical solution pricing.
2. Package Contents
Item
Picture
Remark
Tracker
Standard
Wire harness
Standard
Immobilizer relay
Optional
SOS button
Optional

Copyright © 2021 Shenzhen ANB Technology Co., Ltd. All rights reserved.
4
3. Features and Specifications
Item
Description
Dimension
98*52*18mm
Power range
8-36V DC/1.5A
Working humidity
5%~95%
Operating temperature
‐30℃~75℃
Internal backup battery
120mAh/4.2V
Data transmit
4G LTE/GSM/SMS Communication
LED indicator
1: Red for network
2: Green for GPS
3: Bule for battery
Input
1: ACC detect
2: SOS detect
Output
Immobilizer(cut engine) relay or buzzer
AD
One input AD
RS232
One RS232
Microphone
Support
Accelerometer
Built-in accelerometer
4G chip
FIBOCOM L610
4G/GSM frequency
L610-CN
LTE FDD: B1 B3 B5 B7
LTE TDD: B34 B39 B40 B41
GSM:900MHz/1800MHz
L610-LA
LTE FDD: B1 B2 B3 B4 B5 B7 B8 B28 B66
GSM:850MHz/900MHz/1800MHz/1900 MHz
L610-EU
LTE FDD: B1 B3 B7 B8 B20 B8
GSM:850MHz/900MHz/1800MHz/1900 MHz
GPS chip
ZKMICRO:ATGM332D(BDS+GPS)
GPS sensitivity
-160dB
GPS position accuracy
5 Meters
4G/GSM Null zone data storage
800 Waypoints
Position report
Time based and distance(mileage) based and angle based
Alarm alerts
GEO Fence, speed over, power tamper and SOS(Panic),idle
Configuration
SMS + computer(USB configurator) + server
OTA
Support

Copyright © 2021 Shenzhen ANB Technology Co., Ltd. All rights reserved.
5
4. Knowledge before Usage
4.1 Factory Default Setting
-IP/Port: Empty
-APN, User and pass: Empty
-Speed Limit: Off=000Km/H
-Position data Update Time Interval: 30Seconds when ignition on, 30seconds when ignition off
-Authorized Phone numbers A/B/C: None
4.2 Power Supply and consumption
This device is expected to connect with a DC power source with range of 8-36V DC.
Working current maximum 2A input.
Device working current < 18mA @24V DC
4.3 How to Insert Sim card
Before inserting the sim card, please make sure the sim card 4G and SMS and GPRS activated.
The device will automatically turn on after inserting the SIM card.

Copyright © 2021 Shenzhen ANB Technology Co., Ltd. All rights reserved.
6
5. Installation
5.1 Wiring Diagram
PIN
Wire Color
Remark
1
Red
Power +(8-36V DC)
4
Black
Power Ground
2
White
Ignition Detection(ACC)
5
Yellow
Cut-off, Digital output
6
Brown
Door status high input
3
Blue
Panic(SOS) low input
PIN
Wire Color
Remark
1
White d
reserve
2
Yellow
reserve
3
Brown
AD(Fuel and temperature)
4
Blue
reserve
PIN
Wire Color
Remark
3
Black
5v
1
Brown
GND
4
Red
RS232-TXD
2
Blue
RS232-RXD
PIN
Wire Color
Remark
1
Red
SPK+
2
Black
SPK-
4
White
MIC_N
3
Yellow
MIC_P

Copyright © 2021 Shenzhen ANB Technology Co., Ltd. All rights reserved.
7
5.2 LED working status
Item
Color
Working
Status
Network
Red
Off
Power off
On
Cannot recognize sim card
Fast flashing
Registering network
Slow flashing
Successfully registered the network
GPS
Green
Off
GPS off or no GPS data
Fast flashing
GPS positioning
Slow flashing
GPS positioning succeeded
Battery
Blue
On
Battery on
Off
Battery off
6. Device configuration
GT09L allow user to use SMS Commands to configure necessary parameters.
Details please check as follows instruction.
6.1 Device ID
GT09L doesn’t need configure device ID. GT09L use 136 + the last 8 digits of IMEI as ID.
On the unit case side is with a bar code sticker. please use this code as device ID when
you register device tracking platform. Following picture ID is: 13653256836

Copyright © 2021 Shenzhen ANB Technology Co., Ltd. All rights reserved.
8
6.2 Configure data(4G/GPRS) Parameter
SMS Setting Command:
*SPJLX*P:password*U:IP,port,T#
url: IP or domain name of the tracking server.
port: port of the tracking server.
T: data transmit mode. T=1 is using TCP mode. T=0 is using UDP mode. Default as 1.
Example:
*SPJLX*P:123456*U:198.11.175.123,9016,1#
SMS query Command:
*SPJLX*P:password*C:#
6.3 Configure APN
SMS setting Command:
*SPJLX*P:password*A:APN user name,APN password#
Example 1: APN name is cmnet, APN user name is abc, APN password is 123
*SPJLX*P:123456*A:cmnet,abc,123#
Example 2: APN name is cmnet, no APN user name and APN password
*SPJLX*P:123456*A:cmnet,,#
6.4 Remote Cut-engine (Immobilizer)
Wireless cut-off engine SMS command
*SPJLX*P:password*D:O21#
Wireless disable engine lock status SMS command
*SPJLX*P:password*D:O20#
6.5 Configure Authorized Phone Numbers for alarm alerts
After the authorized number is set, only the authorized number calling is accepted, when the
device detects an alarm (SOS alarm, power failure alarm), it will send SMS to the authorized
number.
SMS setting command:
*SPJLX*P:password*S:number1,number2,number3,#

Copyright © 2021 Shenzhen ANB Technology Co., Ltd. All rights reserved.
9
Example:
*SPJLX*P:123456*S:15000000001,15000000002,15000000003,#
SMS query Command:
*SPJLX*P:password*S:?#
SMS clear Authorized Phone Numbers Command:
*SPJLX*P:password*S:,#
6.6 Time zone Localization Setting
GT09L can configure the timezone of TCP data and SMS data separately, but TCP data uses GMT
time by default.
SMS setting Command:
SPJLX*P:password*TM:-/+hhmm#
hh: mm is SMS data timezone hour and minute.
Example: Setup time zone with -4.
*SPJLX*P:123456*TM:-0400#
6.7 Set overspeed alarm
SMS setting command:
*SPJLX*P:123456*s:Overspeed threshold,Overspeed duration#
Example: when overspeed 120km/h and last for 3 seconds trigger over alarm
*SPJLX*P:123456*s:120,3#
SMS query Command:
*SPJLX*P:123456*s:?#
6.8 Reset Mileage report value
In every Position data packet to tracking server, GT09L data package includes the current travel
mileage. And the user can by SMS command to reset or adjust the mileage report value.
SMS Command:
*SPJLX*P:password*MILE:xxx#
xxx: mileage, unit is Meter.
Example: reset mileage to 2000 meters
*SPJLX*P:123456*MILE:X#

Copyright © 2021 Shenzhen ANB Technology Co., Ltd. All rights reserved.
10
6.9 Reset SMS command password
The GT09L default password is 123456, it can reset the password by SMS, password length is 6.
*SPJLX*P:password*P:new password#
Example:
*SPJLX*P:123456*P:888888#
6.10 Active sleep mode
When sleep GT09L will close GPS module to save power.
*SPJLX*P:password*DSL:X#
Enter sleep mode when ACC is turned off for more than X seconds. 0 is cancel sleep mode.
Example:
*SPJLX*P:123456*DSL:300#
6.11 Tracking parameter(location update) setting
GT09L can update location by time interval and direction angle change.
Setup time interval:
*SPJLX*P:password*E:1,xx,yy#
xx is when ACC on update time , yy is when ACC on update time, units is second.
Example:
*SPJLX*P:123456*E:1,30,60#
Setup direction angle:
*SPJLX*P:password*E:3,zz#
zz is angle change value.
Example:
*SPJLX*P:123456*E:3,30#
6.12 Voice monitor by SMS
*SPJLX*P:password*I:xxxxxx#
xxxxxx is the callback phone number
Example:
*SPJLX*P:123456*I:1500000150#
6.13 Query google link
*SPJLX*P:password*LOCA:#

Copyright © 2021 Shenzhen ANB Technology Co., Ltd. All rights reserved.
11
6.14 Reboot device
*SPJLX*P:password*B:#
6.15 Recover factory setting
*SPJLX*P:password*F:#
6.16 Setup vibration and Arm
If turn on arm mode, after ACC OFF for 3 minutes GT09L will enter the armed state, in the armed
state, if vibration or ACC on is detected, alarm will be triggered.
*SPJLX*P:password*SF:X,Y#
X=0 is Turn off vibration alarm, X=1 is Turn on vibration alarm.
Y=0 is arm, Y=1 is disarm
Example:
*SPJLX*P:123456*SF:0,1#
6.17 Setup towing alarm
Setup towing alarm after ACC OFF.
*SPJLX*P:password*TOW:x,y#
x is the continuous vibration time, in minutes.
y is the towing distance, in meters.
Example:
*SPJLX*P:123456*TOW:1,100#
6.18 Query parameters
*SPJLX*P:password*V:#
6.19 Setup DLT card type
*SPJLX*P:password*DLTY:xx,yy,zz,#
‘xx,yy,zz,’ are DLT card type
Example:
*SPJLX*P:123456*DLTY:14,24,#
Query DLT card type:
*SPJLX*P:123456*DLTY:?#
Clear DLT card type:
*SPJLX*P:123456*DLTY:#

Copyright © 2021 Shenzhen ANB Technology Co., Ltd. All rights reserved.
12
6.20 Setup DLT card ID
*SPJLX*P:password*DLID:xxxxxxxxxxxxxxx,yyyyyyyyyyyyyyy,zzzzzzzzzzzzzzz,#
‘xxxxxxxxxxxxxxx,yyyyyyyyyyyyyyy,zzzzzzzzzzzzzzz,’ are DLT card ID.
Example:
*SPJLX*P:123456*DLID:141999995800100,241999995800100,#
Query DLT card ID
*SPJLX*P:123456*DLID:?#
Clear DLT card ID:
*SPJLX*P:123456*DLID:#
6.21 Setup DLT buzzer time
*SPJLX*P:password*DLBB:x#
X is DLT buzzer time, in minutes.
Example:
*SPJLX*P:123456*DLBB:5#
6.22 OTA Operation
GT09L allow user to do firmware upgrading via GPRS connection. Details operation
command and procedure, please consult with your seller.