Angry Miao CYBERBOARD User manual
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
目录 Catalog
产品说明 Manual
安装流程 Installation
快捷键示意 Shortcut keys
灯效配置 How to edit lighting effects
防伪须知 Anti-counterfeiting notice
售后服务After-sales service
01
02
03
04
05
06
3
7
20
25
27
29
产品说明
Manual
01
3
4
产品说明 Manual
表格 1
产品型号
Product
CYBERBOARD 键盘
CYBERBOARD
重量
Weight
2.5（±0.1）kg，不含轴与键帽
2.5（±0.1）kg (excluding switches or keycaps)
人机角度
Typing Angle
10°
10° incline
LED 数量
LED quantities
5*40 动态点阵，200 颗灯珠
5*40 lamps, 200 Leds
配色方案
Color choices
赛博灰、工业黄、紫雾、虚白、雨林
Cyber Grey, Industrial Yellow, Purple Haze, Vapor White, Jungle Green
定位板固定方式
Plate mounting style
Top Mount
Top Mount
驱动
Drive
自驱，全键无冲
No extra drivers, N-key rollover
键位自定义
Windows PC 端可自定义
Support DIY Web interface in Windows
轴固定方式
Switch mounting style
热插拔
Hot Swappable
5
表格 1
连接方式
Connections
双模：无线蓝牙 5.0、有线（支持 C to C、蓝牙 5.0 只支持 Windows8.0 以上）
Bluetooth 5.0 and USB switchable，tap the bottom switch to switch mode
(supports C to C,Bluetooth 5.0 only availble on Windows 8.0+)
CapsLock 提示灯
Capslock hint
提示灯位于数字 6 与 7 之间
The indicator light is located between the numbers 6 and 7
电量显示
Battery status
Fn+F12，显示电量
当电量低于 5% 时，强制红色电量提示，直到电量耗尽。（可按 Fn+F11 熄屏）
Fn+F12, display power status
When the power is less than 5%, power module will turn red until the power is
off. (Press Fn+F11 to turn off the screen)
USB 接口
USB Port
USB3.0，TypeC，支持 C to C
USB3.0，TypeC，supports C to C
电池
Battery
锂聚合物 4000mAh *2
Lithium battery 4000mAh *2
Qi 无线充电
Qi wireless charge
充电功率 5W，电池电量低于 70% 时，开启无线充电，100% 时关闭
Output power 5W. Wireless charging will turn on when the battery is less than
70%, and it will be turned off when fully charged."
LED 颜色
LED colors
256 色
256 colors
最大功耗
Maximum power dissipation
2.5W
2.5W
产品说明 Manual
6
3mm M2 ×
16
3.5mm+2mm M2 x
8
5mm M3 x
18
M3 六角螺丝刀 x 1
M3 Hexagon Screwdriver x
M2 六角螺丝刀 x 1
M2 Hexagon Screwdriver x
产品说明 Manual
安装流程
Installation
02
7
8
安装流程 Installation
1. 卸下后盖的螺丝
1. Remove the screws of the back
9
安装流程 Installation
2. 注意：打开方向，避免扯坏排线
2. Note: please make sure open from the bottom to avoid damaging the cables
排线
排线
FPC Cable
10
安装流程 Installation
3. 分别移除排线、RF 线连接，并拧开螺丝
3. Remove the FPC cables and RF cables, and loosen the screws
RF 线插座
RF Connector
S
排线底座
FPC Connector
11
安装流程 Installation
4. 取出 PCB 板等组件
4. Take out the PCB sets
12
安装流程 Installation
5. 移除 PCB 板上的螺丝（3mm M2）
5. Remove the screws (3mm M2) on the PCB
13
安装流程 Installation
6. 取下 PCB 板
6. Remove the PCB
14
安装流程 Installation
7. 安装卫星轴至 PCB 板
7. Install the stabilizers in the PCB
15
安装流程 Installation
8. 将 PCB、硅胶减震垫以及定位板按顺序组装好。
注意：区分硅胶垫以及定位板的正反面，正面有 logo
8. Assemble the PCB, silicone mute mount and plate in order
Note: please make sure to put on the front side (with logo) of the silicone mute mount and the plate
PCB
硅胶垫
定位板
硅胶垫 silicone mute mount
PCB PCB
定位板 plate
16
安装流程 Installation
9. 安装轴体
注意：勿暴力安装，以防定位板变形，压坏主板;注意将轴体的轴脚引直，避免歪脚
9. Install the switches
Note: Please install it carefully to prevent deforming the plate or crushing the PCB
17
安装流程 Installation
10. 将 PCB 安装到上盖，锁好螺丝并连接好排线
注意：排线正反面
10. Install the PCB to the upper cover, lock the screws and connect the cables
Note: Please make sure you connect to the right side.
18
安装流程 Installation
11. 合上后盖
注意：盒盖方向，避免扯坏排线
11. Close the back cover
Note: Closing the the back cover in the wrong direction could damage the cables
19
安装流程 Installation
12. 锁上后盖的螺丝，完成组装
12. Lock the screws from the back cover and complete the installation
快捷键示意
Shortcut keys
03
20
Table of contents
Other Angry Miao Keyboard manuals
