Antonio Bernini DIVER 1000 User manual

DIVER 1000
The allure of the deep confronts a diver with immense challenges and brings
the best out in him. Diver 1000 is ideal for a dive into the fascinating world of
the ocean and to explore the magnificent marine depths upto 1000 meters.
For a diver, its about touching the depths of the sea and feeling the
magnitude of the world beneath. Diver 1000 takes a diver right at the pit of
the sea surface, 1000 meters being the average depth of the sea and the
maximum reach of sunlight underwater.
Crafted to handle water pressure upto 1000 meters under water, the watch is
a faultless companion for a deep sea diver. The stainless steel case with an
aluminum ring on top gives the watch a sporty look and adds immensely to
the style quotient.
The watch comes with an automatic helium escapement valve and offers
luminous indices for clear underwater visibility. It has an integrated
hypoallergic silicon strap, date feature and a 12 hour chronograph. Diver
1000 is surely a pertinent possession for the marine adventurer.

Normal
Second
Hand
Minute
Hand
Button A
Chronograph
Start/Stop
Button B
Chronograph
Lap Time
Measurement/Reset
Date
Feature
Hour
Hand
Chronograph
Minute Hand
Chronograph
Hour Hand
Chronograph
Second Hand
DISPLAYS AND BUTTONS
Crown
Crown for Internal
Bi-Rotational Disc
Underwater
Resistance Depth
Automatic Helium
Escapement Valve

Normal
Second
Hand
Minute
Hand
Hour
Hand
SETTING THE TIME
•Pull the crown out to the 2nd Position to stop the watch movement. An indicator of this
would be that the Second hand stops functioning.
•Turn the crown clockwise or anti-clockwise to set the hour and minutes.
•Push the crown back to Normal Position and ensure it is screwed in.
Crown’s
2nd Position

SETTING THE DATE
•Pull the crown out to the 1st Position.
•Turn the crown clockwise to set the date.
•Push the crown back to Normal Position and ensure it is screwed in.
* Never Correct the date between 9:00PM and 12:30 AM
Normal
Second
Hand
Minute
Hand
Hour
Hand
Crown’s
2nd Position

Chronograph
Minute Hand
Chronograph
Second Hand
CHRONOGRAPH FUNCTIONALITY
Simple Time Measurement
•Press Button ‘A’ to start measuring the time using the Chronograph.
•Press Button ‘A’ again to stop the Chronograph Second Hand and measure the elapsed
time.
•On Pressing Button ‘A’ again, you can continue measuring the time from where it was
stopped.
•You can continue the above steps to measure and read multiple simple time(s).
•Press Button ‘B’ to reset the chronograph.
Button A
Chronograph
Start/Stop
Button B
Chronograph
Lap Time
Measurement/Reset

•Press Button ‘A’ to start measuring the time using the Chronograph.
•Press Button ‘B’ to measure a lap (the Chronograph Second Hand will stop but the
chronograph movement will continue)
•On Pressing Button ‘B’ again, the Chronograph Second Hand will move forward to catch
up with the actual time elapsed.
•You can continue the above steps to measure and read multiple intermediate time(s).
•To Reset, first Press Button ‘A’ to stop the Chronograph and then Press Button ‘B’.
CHRONOGRAPH FUNCTIONALITY
Lap Time or Intermediate Time Measurement
Chronograph
Minute Hand
Chronograph
Second Hand
Button A
Chronograph
Start/Stop
Button B
Chronograph
Lap Time
Measurement/Reset

Cleaning
Ensure the watch is cleaned from time-to-time. Use a cloth to dab the
glass to remove the dust. Wipe the belt with a wet cloth (not the leather
belt).
Condensation
Sometimes a slight condensation may appear under the glass of your
watch. This mist will disappear on its own and will not affect the
functioning of your watch.
Do not leave your timepiece anywhere where it might be subjected to
major variations in temperature or humidity, in direct sunlight or near
strong magnetic fields.
Water Resistance
Ensure the crown is pushed back and is screwed in correctly before the
watch is taken under water. Additionally, also ensure all chrono crowns
are screwed in by turning the round valve clockwise on the top of the
Chronopushers (Button A and Button B).
CARE AND MAINTENANCE

An Antonio Bernini Timepiece operates for more than 2 years in continuous use.
If you envisage not wearing your chronograph for several weeks or months, we would
advise you to put it to one side with the crown pulled out, extending battery life
considerably.
We would advise you to have your watch inspected every 2 –3 years, to benefit from
the highest standards of service and to ensure your guarantee remains in force.