Anviz iCam-D2 Series User manual

iCam-D2 Series
AI IR Mini Dome Network Camera
V1.1
Installation Guide
IntelliSight

Warning
Notice
Store the Anviz product in a dry and ventilated environment.
Avoid exposing the Anviz product to shocks or heavy pressure.
Do not install the product on unstable poles, brackets, surfaces or walls.
Use only applicable tools when installing the Anviz product. Using excessive force with
power tools could cause damage to the product.
Make sure the power supply voltage is correct before using the camera. otherwise it may
cause damage to the device.
Always use the dry soft cloth to clean the device. If there is too much dust, please use
the water to dilute the mild detergent first and then use it to clean the device. Finally
use the dry cloth to clean the device. Don’t use volatile solvent like alcohol, benzene,
thinner and etc or strong detergent with abrasiveness, otherwise it will damage the
surface coating or reduce the working performance of the device.
Please check if all the items on the package list have been included in package.
This equipment must be installed and used in strict accordance with the instructions
given in the user documentation. This equipment contains no user-serviceable
components. Unauthorized equipment serviceable components. Unauthorized
equipment regulatory certifications and approvals.
Video and audio surveillance can be prohibited by laws that vary from country to country.
Check the laws in your local region before using this product for surveillance purposes.
When transporting the Anviz product, please use the original packaging or equivalent to
prevent damage to he product.
Do not touch the CCD (CMOS) optic component directly. You can use the blower to clean
the dust or dirt on the lens surface. Please use a dry cloth wetted by alcohol to wipe away
the dust gently if it is necessary to clean.
Please don’t aim the device at strong light (such as lighting, sunlight and so on) to
focus; otherwise it may cause overexposure (It is not the device malfunction), which will
affect the longevity of CMOS.
1

Packing List
Mounting Template
①Camera x1
Mounting template X1③
Installation guide X1④
②Expansion pipes
and screws x2
iCam-D2
V1.1Installation Guide
IntelliSight
2

Product Interface
Micphone
Speaker
Micro SD
Card Slot
Reset
Angle Gauge
The SD card up to 128G storage, suggest SDXC
Class 10 or above.
Note:
3

Device Connection
DC Power Jack
Input 12V 1A
RJ45 Network Jack
PoE Support
IntelliSight
Mobile APP
Internet Router PoE Switch
PoE
iCam-D2
DC 12V
Optional
PC Cilent
Step 1
Use a flat head screwdriver to pry up the
three buckles at the bottom of the
camera and remove the plastic dome
cover.
4
Installation

Installation
Step 2
Step 3
Use expansion pipes and screws to fix
the camera on the wall or ceiling. If it is
mounted on a wooden board, just use
the screws.
Step 4
Hide or fix the connected wires and
network cables, turn the lens to adjust
the angle of view.
Put the protective dome plastic cover
back on the camera and buckle the snaps.
5

6
Purchasing our product.
Please do not hesitate to contact us if
there are any questions or requests.
This guide is designed to be a reference
instruction for using your product.
Download
& Install
IntelliSight App
Thank You

32920 Alvarado-Niles Rd Ste 220, Union City, CA 94587
©2022 Anviz Global Inc. Anviz and identifying product names and numbers herein are registered
trademarks of Anviz Global Inc. All non-Anviz brands and product names are trademarks or
registered trademarks of their respective companies. Product appearance, build status and/or
specifications are subject to change without notice.
www.anviz.com
Join Community.anviz.com
if you have any questions or
suggestions to share
Community
[email protected]
Response within 24 hours
Email
Questions?