Anviz IntelliSight iCam-B2 Series User manual
iCam-B2 Series
AI IR Outdoor Mini Bullet Network Camera
V1.1
Installation Guide
IntelliSight
Store the Anviz product in a dry and ventilated environment.
Always use the dry soft cloth to clean the device. If there is too much
dust, please use the water to dilute the mild detergent first and then
use it to clean the device. Finally use the dry cloth to clean the device.
Don’t use volatile solvent like alcohol, benzene, thinner and etc or
strong detergent with abrasiveness, otherwise it will damage the
surface coating or reduce the working performance of the device.
1
Avoid exposing the Anviz product to shocks or heavy pressure.
Do not install the product on unstable poles, brackets, surfaces or
walls.
Use only applicable tools when installing the Anviz product. Using
excessive force with power tools could cause damage to the
product.
Make sure the power supply voltage is correct before using the
camera. otherwise it may cause damage to the device.
Please check if all the items on the package list have been included
in package.
This equipment must be installed and used in strict accordance with
the instructions given in the user documentation. This equipment
contains no user-serviceable components. Unauthorized equipment
serviceable components. Unauthorized equipment regulatory
certifications and approvals.
Video and audio surveillance can be prohibited by laws that vary
from country to country. Check the laws in your local region before
using this product for surveillance purposes.
When transporting the Anviz product, please use the original
packaging or equivalent to prevent damage to he product.
Do not touch the CCD (CMOS) optic component directly. You can use
the blower to clean the dust or dirt on the lens surface. Please use a
dry cloth wetted by alcohol to wipe away the dust gently if it is
necessary to clean.
Please don’t aim the device at strong light (such as lighting, sunlight
and so on) to focus; otherwise it may cause overexposure (It is not the
device malfunction), which will affect the longevity of CMOS.
Warning
Notice
Packing List
①Camera x1
③Antenna x1
④Waterproof Jacket x1
②Mounting Bracket x1
⑦Mouting Plate x1
⑥Expansion pipes
and screws x3
⑤Inner hexagon spanner x1
⑧ Installation Guide x1
iCam-B2 Series
V1.1Installation GUIDE
IntelliSight
2
Product Interface
Microphone
Connection
Status Indicator
3
Connection Indicator Status
Red Light
Green Light
Blue Light
The Network is Disconnected
Network Connection In Progress
Network Connected
RJ45 Network Jack
(PoE Support)
Power Connect Jack
(Input DC 12V)
Micro SD
Card Slot
1/4 inch screw thread
Reset
Installation
Connect the wifi antenna to the camera and tighten it.
4
Step 2
Step 1
Step 3
Tighten the camera onto the bracket, turn the camera to adjust the
angle of view.
Use expansion pipes and screws to fix the bracket on the wall.
If it is mounted on a wooden board, just use the screws.
5
Step 4
Tighten the nuts on the bracket with a Inner hexagon spanner,
then connect the cables.
Waterproof jacket(RJ45) assembly instructions:
Insert the screw cap(part 1) into the RJ45 plug.1.
Insert the rubber barrel ring (part 2) into the
RJ45 plug.
2.
Insert the waterproof sleeve(part 3) into the
RJ45 plug.
3.
Place the rubber barrel ring into the waterproof
sleeve.
4.
Put the seal (part 4) on the RJ45 jack of the
camera.
5.
Insert the plug into the RJ45 jack.6.
Tighten the waterproof sleeve to the RJ45 jack.7.
Tighten the screw cap.8.
Part 4 Part 3 Part 2 Part 1
Step 5 (Optional)
Please implement the above steps when you need
to use the Micro SD card. The SD card up to 128G
storage, suggest SDXC Class 10 or above.
Note:
23
1/4 英制螺纹
2. Insert a Micro SD card into the slot ,the card slot is elastic so it only
needs to press slightly to install the Micro SD card.
Install Micro SD card
1. Loosen the screw on the lower cover. Remove the lower cover and
you can see the Micro SD card slot which is show in the picture of
dimension.
Mobile APP
Internet Router PoE Switch
PoE
iCam-B2
Device Connection - PoE & Wi-Fi
IntelliSight
PC Cilent
DC 12V
Optional
6
Thank You
7
Purchasing our product.
Please do not hesitate to contact us
if there are any questions or requests.
This guide is designed to be a
reference instruction for using Anviz
product.
Download
& Install
IntelliSight App
32920 Alvarado-Niles Rd Ste 220, Union City, CA 94587
©2022 Anviz Global Inc. Anviz and identifying product names and numbers herein are registered
trademarks of Anviz Global Inc. All non-Anviz brands and product names are trademarks or
registered trademarks of their respective companies. Product appearance, build status and/or
specifications are subject to change without notice.
Join Community.anviz.com
if you have any questions or
suggestions to share
Community
Response within 24 hours
Email
Questions?
Table of contents
Other Anviz Security Camera manuals
