AOSafety GoggleGear Dust User manual

Now it’s a SNAP to change
your safety eyewear to
dust goggles.
Almost every factory has a dusty area.
In fact, “particulates in the eyes” is the
most common form of eye injury.
However, many workers don’t like
wearing goggles because they’re uncom-
fortable, and they block much of the view
of the work area.
But that’s all changed. Now, your work-
ers can change their Lexa eyewear into
comfortable impact/dust goggles by sim-
ply snapping the GoggleGear adapter
onto the eyewear.
Dust GoggleGear®
for LEXA®
DUST

Product Codes Description
16600-00000 GoggleGear, Medium, Standard Bridge
16605-00000 GoggleGear, Medium, Hi-Set Bridge
16606-00000 GoggleGear, Large, Hi-Set Bridge
16615-00000 Assembled GoggleGear, Medium,
Clear Lens, Standard Bridge
16616-00000 Assembled GoggleGear, Large,
Clear Lens, Standard Bridge
16617-00000 Assembled GoggleGear w/Strap,
Medium, Clear Lens, Standard Bridge
16618-00000 Assembled GoggleGear w/Strap,
Large, Clear Lens, Standard Bridge
16620-00000 Assembled GoggleGear, Medium,
Gray Lens, Standard Bridge
16621-00000 Assembled GoggleGear w/Strap,
Medium, Gray Lens, Standard Bridge
16622-00000 Assembled GoggleGear, Large,
Gray Lens, Standard Bridge
16623-00000 Assembled GoggleGear w/Strap,
Large, Gray Lens, Standard Bridge
Soft foam on adapter seals out particulates, and is comfortable for all day
use. The polyurethane foam is easily cleaned and is self-extinguishing.
GoggleGear snaps onto the back of the Lexa lens, and “locks” securely into
place over the temple “studs”.
Lexa with GoggleGear offers a wider view of the work area than tradi-
tional impact goggles.
Lexa and GoggleGear together are lighter weight than most goggles for all
day comfort.
GoggleGear is designed with “vent channels” on top and bottom. The
resulting air flow removes hot, moist air from the inside for more comfort,
and it bathes the inside of the lens with cooler air to minimize fogging.
The patented, contoured lens of Lexa is protected by the proprietary DX™
anti-fog, anti-scratch, anti-static, anti-chemical attack coating to extend the
life of the lens and to minimize fogging.
GoggleGear is available in two sizes, Medium and Large, to fit the two sizes
of Lexa. GoggleGear is also available with a Hi-Set bridge*.
For especially active applications, workers can replace the temples with an
optional strap.
Lexa eyewear meets the safety spectacle requirements of ANSI Z87.1 and
CSA Z94.3. When GoggleGear and Lexa are combined, they meet the
impact goggle requirements of ANSI Z87.1.
Made in the USA
ISO 9001
Aearo Company
Southbridge Operations
A1655
Using GoggleGear Is
As Easy As
One, Two, Three!
Soft foam backing seals
out particulates
Full Field of Vision
Lighter weight
than most goggles
Vent channels at top and bottom
for improved air flow
Strap option available
DX Anti-fog coating
minimizes fogging
Regular or Hi-Set
nasal bridges
for LEXA®
DUST Two sizes to fit Lexa
* High-Set Bridge version is not CSA approved.
Aearo Technologies • 8001 Woodland Drive • Indianapolis, IN 46278
AOSafety®, Duralite®, DX™, Lexa® and GoggleGear® are trademarks licensed to Aearo Technologies. ©2007 Aearo Technologies. 32100B 2.07
Technical Questions?
USA and Canada Other Countries
Phone: [phone]
Fax: [phone]
For ordering information or your
nearest stocking distributor:
USA Export Sales
Phone: [phone]
Fax: [phone]