Read all instructions in this manual carefully
before beginning the installation. If you have any
questions, please contact technical support.
» The stand and its parts are designed to be
mounted with Apek monitors. Apek does not
cover damage installed with other monitors.
» Do not install monitors with a larger weight than
recommended.
» Do not repair the product yourself. Contact
technical service for verification and repair.
» Use the package to store components and
spare parts.
» Do not force the loosen parts when assembling,
the parts are designed to fit perfectly.
» Install the product in a flat and stable location.
» Periodically wipe the stand with a clean, slightly
damp cloth (it is not advisable to use chemicals).
» Do not place or support cleaning products
and/or substances on the support which may leak
or damage the material.
» Be careful when handling the monitor. Install
with at least 2 people.
» When supporting the monitor with the screen
Read all instructions in this manual
carafully before beginning the installation.
Apek warrants to the customer the product,
support and parts replacement for a period of 12
(twelve) months, counted from the date of
issuance of the invoice of purchase, provided that
it has been installed according to the guidelines
described in the manual installation that
accompanies the product and only in the national
territory.
» Apek guarantees the product of its manufacture
against any defect of material or manufacturing
process, provided that at the discretion of its
authorized technicians, it is found defective under
normal conditions of use.
Apek is a company that cares about the
environment. We seek to develop products with
the maximum of recyclable materials and with the
least environmental impact. Dispose of materials
properly.
Packaging materials such as cardboard boxes,
bubble wrap, papers, EPS (expanded
polystyrene), EPE (Expanded Polyethylene) and
bags, are recyclable. Check the type of material
for proper disposal in specialized recyclers.
49”• 65”
TouchSpace family installation manual
SECURITY INSTRUCTIONS
SpyderWheel
Installation Manual
SpyderWheel
Generation 4
Environment
Warranty
» The replacement of defective parts and
performance of the services resulting from this
warranty, will be provided directly at the factory or
in technical assistance accredited by Apek.
» On-site service, may be hired additionally. This
service is not included in the factory warranty.
Warranty limitations
Warranty against manufacturing defects does not
cover the following items:
» Installation or use of the product in
disagreement with the recommendations in the
installation manual.
» Damage caused by:
• Bad use;
• Accident and fall;
• Agents of nature;
• Chemical agents;
• Inappropriate applications, changes,
modification or repair performed by persons or
entities not authorized by Apek;
• Removal and/or modification of serial
number or product identification;
» Use of the product with load (wight) above its
capacity;
facing down, make sure the surface is adequate
not to damage it.
» The installation of parts that do not belong to the
product are the sole responsibility of the buyer.
» Apek assumes no responsibility or liability for the
persons or entities that may offer a warranty on its
products.
» Expenses arising and consequent upon the
installation of parts that do not belong to the
product are the sole responsibility of the buyer.
» Apek reserves the right to change the general,
technical and aesthetic characteristics of its
products without prior notice.
» The warranty is valid only upon presentation of
the invoice for the purchase of this product.
2 3
