More Security, More Convenience http://www.apexis.com.cn
Note: Only one DDNS can be chosen, for example, if you use manufacturer’s DDNS,
the 3rd one won’t work, if use the 3rd DDNS, the manufacturer’s one won’t work.
3. Change the camera’s port.
The default port of camera is “80”, please change “80” to any other one you like, such
as “81”, “100”, “8091” etc.
Click “OK”, the camera will reboot, wait about 30 seconds.
Make sure the “Subnet Mask”, “Gateway”, “DNS Server” is the same as your router.
4. Set Port Forwarding in the router.
This is the most important step. Set port forwarding in router refer to the IP of your
camera correctly, then the DDNS will work. Because there are so many kinds of
routers from all over the world, so it’s difficult to show a fix steps, but there are some
samples of different routers’ port forwarding settings as below, just for reference:
TP-LINK:
(1) Login the router.
(2) Choose “Forwarding”, select “Virtual Servers”
(3) Click the Add New button, pop-up below:
