APH Juno User manual
Charging Juno
Begin charging Juno before first use. When the light on the left side of the device
is red, the battery needs to be charged. You can use the device for about three
hours once the battery is fully charged. The charging LED light will turn green
when the battery is charged.
To charge Juno:
1. Insert the USB Type C cable into the USB-C slot on the left side of the
device.
2. Attach the power adapter to the USB-C cable, and plug the power adapter
into an electrical outlet. You can alternately insert the cable into a computer
without using the adapter, but this charging method is slower.
2
3. Power on Juno by pressing the white Power button . You can work when
the LED is solid red, which means that the battery is charging. However, you
should leave it plugged in until the light turns green. The image on the
following page is a view of the back and left sides of the device.
4. Begin using Juno. Go to the next section, “First Use.”
3
4
First Use
The first time you use Juno, you must follow these steps. You cannot exit once
you start these steps and cannot use the device until you complete them.
However, you can change these settings later if needed.
1. Plug in and power on Juno. See the previous section, “Charging Juno.”
2. On the Select Juno Voice, tap to select a
female or male voice to narrate as you
navigate Juno. Only English is available.
3. Tap the Next button . The Select Date
screen is displayed.
5
4. Swipe up or down in each column and tap
to select the month, day, and year. Tap the
Previous button to return to the
previous screen.
5. Tap the Next button . The Select Time
screen is displayed.
6. Swipe up or down in each column and tap
to select hours, minutes, and AM or PM.
7. Tap the Next button to complete the
setup. The Live view is displayed. Refer to
the Juno User Guide for step-by-step
instructions.
6
7
Hardware Buttons
See the Juno User Guide for more information about the hardware buttons.
Button Name Color Location Description
Power White Top left Press to power on the device.
Short press to put on standby.
Long press to power off.
Color
Mode
Blue Middle and
lower left
Press to cycle through true
color, grayscale, and 22 high
contrast color combinations.
8
Button Name Color Location Description
Capture Red Top right
Press to capture a snapshot or
go to live view. Optionally save
a capture, recognize text, and
read or listen to the text.
Zoom
in/out
Yellow Middle and
lower right
Press and hold for continuous
zoom, press and release to
incrementally zoom, or pinch
and zoom on touch screen to
increase or decrease
magnification.
9
Button Bars on the Screen
Tap the Restore button in the lower left corner of the screen to display the
button bars on the left and right sides of the screen.
Tap the Hide button to no longer display the button bars.
Main Menu
Volume and
Speech Rate
Restore & Hide
Button Bars
LED Lights
On and Off Toggle
Lines & Masks
Toggle
Focus Unlocked &
Locked Toggle
10
Main Menu Structure
See the Juno User Guide for features associated with these menus.
11
12
Files Menu
File Information screen
Edit screen
Record Audio Tag screen
Transfer screen
13
Manual
Acknowledgements
Support
About Menu
Support screen
Acknowledgements screen
Juno User Guide
14
Brightness Menu
Settings Menu
The Settings menu has four sub-menus, as shown on the following pages:
Reading Settings
Menu Settings
User Settings
System Settings
15
Reading Settings Menu
Viewing Modes screen
Default viewing mode (top right button)
Image mode
Teleprompter mode
Ticker Tape mode
16
Viewing Modes screen (continued)
Default highlighting mode (bottom right button)
Boxed
Underlined
Select Reading Language screen
17
Menu Settings Menu
Talking Menu screen
Voice Selection screen
Color Theme screen
Font Size screen
18
User Settings Menu
Color Modes screen
Standby Time screen
Juno Storage screen
19
System Settings Menu
Time & Date screen
Default Save Types screen
Update Juno screen
Reset All Settings screen
20
Table of contents
Other APH Magnifier manuals
