AppNeta r40 User manual
recommended
Remember: the port you use matters. When it’s time
to connect, use the port shown.
www.pathviewcloud.com
********
********
You already have some appliances
Your rst appliance in your only org
You have multiple orgs
r40rackAppliance
Setup Guide
Need help? Just ask.
Canada & USA - 800.664.4401
United Kingdom - 08081.890.527
tickets.appneta.com
updated April 2015
FCC Class B Notice
This equipment has been tested and found to comply with the limits
of a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that the
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Modications not expressly approved by the manufacturer could void
the user’s authority to operate the equipment under FCC rules.
First time?
We’ve put together a tutorial to get you up and
monitoring as quickly as possible. Visit the Support
Portal to get started.
docs.appneta.com/onboarding
Download this guide as a PDF from our Support Portal.
docs.appneta.com/appliance-setup
For compliance information:
www.appneta.com/certications
Using FlowView?
It will require additional setup. Find complete instruc-
tions on the Support Portal.
Racking your appliance?
The r400 is 1 RU and can be mount-
ed in an EIA-standard 19-inch rack.
