APUS Alpha User manual

“Alpha” & “Beta" User’s Manual
The display is normally turned off. To activate the normal time display (hour,
minute, second), please press either A or B.
NORMAL TIME DISPLAY
1.When the display is activated, press A to change mode. Mode sequence is,
time, calendar, alarm 1, alarm 2, timer /countdown, time zone 2.
2.Press B to toggle chime on/off.
TIME SETTING
1.In normal time display, press and hold A for 3 seconds to enter setting mode;
hour will be highlighted.
2.Press B to advance digit; press and hold B for fast advance.
3.Press A to set and advance to next setting value.
4.Setting sequence is hour, minute, second, 12/24 hour format.
5.After 12/24 hour format has been selected, press A to exit setting mode.
Note: In any setting mode, if no pusher is operated for 8 seconds, settings will
be saved and the display will return to the normal time display.
CALENDAR SETTING
1. Press A to change to calendar mode.
2. Press and hold A for 3 seconds to enter setting mode; year will be
highlighted.
3. Press B to advance digit; press and hold B for fast advance.
4. Press A to set and advance to next setting value.
5. Setting sequence is year, month, date.
6. After date has been selected, press A to exit setting mode.
Note: Weekday is automatically updated upon exiting the setting mode.
ALARM MODE
1.Press A to change to alarm 1 mode. Press A again to change to alarm 2 mode.
2.Press B to toggle alarm on/off.
3.Press and hold A for 3 seconds to enter setting mode; hour will be highlighted.
4.Press B to advance digit; press and hold B for fast advance.
5.Press A to set and advance to minute.
6.Press B to advance digit; press and hold B for fast advance.
7.After minute has been selected, press A to exit the setting mode.
TIMER / COUNTDOWN MODE
1.Press A to change to timer mode. Press B to Start the timer.
2.Press and hold A for 3 seconds to enter the setting mode for the countdown;
hour will be highlighted.
3.Press B to advance digit; press and hold B for fast advance.
A
B

4.Press A to set and advance to minute.
5.Press B to advance digit; press and hold B for fast advance.
6.Press A to set and advance to second.
7.Press B to advance digit; press and hold C for fast advance.
8.After second has been selected, press A to exit the setting mode.
9.Press B to start the Countdown.
TIME ZONE 2 SETTING
1.Press A to change to time zone 2.
2.Press and hold A for 3 seconds to enter setting mode; hour will be highlighted.
3.Press B to advance digit; press and hold B for fast advance.
4.Press A to set and advance to next setting value.
5.Setting sequence is hour, minute.
6.After minute has been selected, press A to exit the setting mode.
END