Aquatic PRO CLASSIC User manual
WWW.AQUATICAV.COM Copyright © Aquatic AV 2021
PRO CLASSIC 6.5” SPEAKERS
(PC410)
QUICK START GUIDE
PRO CLASSIC 6.5” SPEAKERS
(PC410)
QUICK START GUIDE
WWW.AQUATICAV.COM Copyright © Aquatic AV 2021
Contents
GETTING STARTED
INSTALLATION
One (1) pair of 6.5” Speakers
Grill
Four (4) mounting screws
Four (4) stainless steel speed clips
When rst unpacking your new speaker, please check rst that the package contains all the items
below. If something is missing, contact the store where you purchased the product.
Quick Start Guide
Warranty information
Template
Make sure your boat, ATV, vehicle, stereo, or amplier is off during the installation process. Please
read all installation instructions before beginning. If you have any questions, email us at
support@aquaticav.com or use the Aquatic AV App. Customer support on the app is available
Monday through Friday from 8 AM - 5 PM PST.
Tools Needed
Electric drill
Drill bit (sizes will vary based on surface
material)
Phillips screwdriver / Allen wrench
Appropriate saw or utility knife to cut the
surface material
18 AWG or larger speaker wire
2.5 mm and 5.2 female speaker spade
connectors (recommended)
Wire strippers (optional)
Crimping tool (optional)
Electric tool (optional)
Marine sealant (optional)
The Aquatic AV RGB Controller (RG100)
RGB 12 ft Extension Cable (CB105)
RGB 24 ft Extension Cable (CB106)
RGB Y-Splitter (CB111)
Universal Male RGB and Female Speaker Adapter Kit (CB112)
Additional Accesories (sold separately)
Mounting the Speakers
1. Please choose a mounting location with the following mounting considerations in mind.
3. Trim the template and make sure it ts in the selected location with enough depth and clear-
ance
4. Using a drill bit appropriate for the mounting surface, drill a hole inside the dashed line on the
template to prepare the mounting surface for cutting
5. Using a jigsaw or rotary tool, cut the mounting surface along the inside of the line on the tem-
plate
6. Use a le and sandpaper to rene the size of the cutout if deemed necessary
NOTE: For customized installations, additional tools and materials may be needed. Please visit an
authorized Aquatic AV dealer before doing customized installations.
INSTALLATION (cont.)
NOTE: Do not over-tighten the screws, especially if the mounting surface is not at. Bending the
speaker frame can cause distortion.
Considerations While Wiring Your Speakers
• Speaker wires are not included with the speakers. You should use 18 AWG or larger speaker
wires to connect the speakers to the stereo
• The leads on the speakers are terminated using make spade connectors. You should use
female spade connectors (Not Included) to connect the speaker wire to the speaker leads for
better connection
SPEAKER WIRE COLOR SPEAKER WIRE POLARITY SPADE CONNECTOR SIZE
White Positive (+) 0.2” (5.20 mm)
White with a black stripe Negative (-) 0.11” (2.8 mm)
NOTICE
During the installation of the Speaker, make sure to mount the speaker on a vertical surface. If
mounted on a horizontal surface, water can be let in and deposit around the Speaker. This can
harm the Speaker as time passes.
Make sure to turn off any power connection to the source unit, amplier, or speakers during the
installation process. Also check that the wires and connections are isolated from each other, not
touching any surface. Otherwise, it can cause a short circuit, which may permanently damage the
equipment and void the Product Warranty.
2. Route the speaker wires (and LED wires, if applicable) from the source to the speaker location
with good clearance for the wires.
Dimensions
2.3”
(58 mm)
3.4”
(86.2 mm)
4 PIN RGB Connector
Length: 8.3” (210mm)
6.8”
(174 mm)
5.1”
(130 mm)
6.1”
(155.5 mm)
5.1”
(130.1 mm)
WWW.AQUATICAV.COM WWW.AQUATICAV.COM
Copyright © Aquatic AV 2021 Copyright © Aquatic AV 2021
PRO CLASSIC 6.5” SPEAKERS
(PC410)
QUICK START GUIDE PRO CLASSIC 6.5” SPEAKERS
(PC410)
QUICK START GUIDE
PRODUCT REGISTRATION
Register your new Aquatic AV product in order to receive a 2-year warranty. You will need proof of
purchase, such as a receipt, from an authorized dealer. Additionally, you will have to provide your
contact information, the date and location of the purchase, and the environment of the product
(Marine, Harley, Spa, etc.).
You can submit a Product Registration form at the Aquatic AV Support Center or easily complete the
registration process with the Aquatic AV App. The app is available on the App Store for iOS devices
and on the Play Store for Androids.
Aquatic AV offers a limited warranty of our products on the following terms:
Length of warranty
2 years on audio systems, electronics, speakers, and accessories (receipt required).
Coverage
This warranty covers only the original purchaser of an Aquatic AV product purchased from an
authorized Aquatic AV dealer. In order to receive service, the purchaser must provide Aquatic AV
with a copy of the receipt stating the customer name, dealer name, product purchased and date of
purchase.
Defective products
Products found to be defective during the warranty period will be repaired or replaced (with a
product deemed to be equivalent) at Aquatic AV’s discretion.
What is not covered
• Damage caused by accident, abuse, improper operations or theft.
• Any cost or expense related to the removal or reinstallation of product.
• Service performed by anyone other than an authorized Aquatic AV service center.
• Any product with the serial number or tamper labels defaced, altered, or removed.
• Subsequent damage to other components.
• Any product not purchased from an authorized Aquatic AV dealer.
Limit on implied warranties
Any implied warranties including warranties of tness for use and
merchantability are limited in duration to the period of the express warranty set forth above. Some
states do not allow limitations on the length of an implied warranty, so this limitation may not apply.
No person is authorized to assume for Aquatic AV any other liability in connection with the sale of
the product.
How to obtain service
You must obtain a return material authorization number (RMA) to return any product to Aquatic AV.
You are responsible for shipping charges of returned products to Aquatic AV.
Please record the model and serial number[s] of your equipment in the space provided below as
your permanent record and will assist us with your factory warranty coverage. These numbers can
be found on the rear of the speaker.
WARRANTY
RGB CONFIGURATION
RGB Controller (RG100)
(Sold separately)
RGB/LED OUTPUT
Universal Male RGB and Female Speaker Adapter Kit (CB112)
FEMALE SPEAKER ADAPTER
BLACK (+12V)
GREEN
RED
BLUE
RGB Controller (RG100)
(Sold separately)
RGB/LED OUTPUT
Universal Male RGB and Female Speaker Adapter Kit (CB112)
FEMALE SPEAKER ADAPTER
BLACK (+12V)
GREEN
RED
BLUE
Universal Male RGB and Female Speaker Adapter Kit (CB112)
Get this kit to use our RGB speaker connector that allows to to connect our RGB speakers with
most RGB controllers that have red, blue, and green wires. Also included is our 4 PIN Speaker Wire
Adapter that allows you to connect to any standard speaker wires.
FEMALE 4 PIN SPEAKER WIRE ADAPTER
MALE RGB CONNECTOR
This manual suits for next models
1
