Arboria Astoria Arbor User manual

-Driver bit
(if other than Phillips head)
Power screwdriver or drill that accepts inter-
changeable bits*
Two bags of concrete mix (60#) to anchor arbor
Tape measure
* A bit holder may be needed if drill has a quick-change chuck.
HANDY TO HAVE:
Carpenters square
Stool or short ladder

one 2 1/2” screw

LWO Corporation
3841 N. Columbia Blvd.
Portland, Oregon 97217
[phone]
[phone]
www.arboria.com
I N S T A L L I N G T H E A R B O R
Win FREE Arboria Products
Give us feedback about this Arboria product and be entered into a
drawing to win Arboria goods. It’s easy, go to www.Arboria.com,
choose a product then click on the link to review. Be sure to enter
your email and telephone so that we may contact you if you win.
Upload a photograph for an extra chance to win. Visit
www.Arboria.com for official rules. No purchase necessary.
Arbor post
Anchor
Soil
Concrete
Attach all four anchors to the bottom of the arbor using the
provided screws, two screws per anchor, staggering the
screws.
Measure the distance in between all anchors and dig four 8”
diameter holes to accommodate the anchors.
Carefully lift the arbor and position in place, avoid tilting
the arbor on the anchors.
Plumb and level the arbor.
Mix concrete according to the manufacturer's instructions,
fill each hole within 1/4” of the bottom of each post, posts
should not be set in the concrete.
This arbor may be secured using a variety of techniques. These include attach-
ing to an existing structure or anchoring with gravel or river rock instead of
concrete. The instructions below represent secure mounting with concrete. Use
caution when moving the arbor to its final placement. Two people are required
to lift or move the arbor.
1
2
3
4
5
STEPS