Arboria Arbor Base User manual

IDLEWILD COLLECTION
Division of LWO Corp. / P.O. Box 17125 / 3841 North Columbia Boulevard / Portland, Oregon
503-286-5372 / fax [phone] / www.arboria.com
PLEASE READ COMPLETELY BEFORE YOU BEGIN ASSEMBLING
1 of 2
ASSEMBLY INSTRUCTIONS
820.3163 Arbor Base updated 09/09/2005
ARBOR BASE
HARDWARE LIST
PARTS LIST
STEP 1
A2½” Wood screws (16)
Assembled arbor base with planters
STEP 2A
Attach 2 braces to each base assembly. Braces
may go on outside of arms depending on Arbor
width.
IMPORTANT: The side panel width will determine the location of the braces. For 17½” width
arbors (Rosedale, Astoria, Nantucket and the Longevity) attach inside arbor base assembly arms.
Refer to STEP 2A. For 24” width arbors (Victoria, Glendale, and the Casablanca) attach outside
arbor base assembly arms. Refer to STEP 2B for .
A
A
A
Base assembly (2)
Braces (4)
Attach braces to inside of arbor base assembly,
then to arbor frame.

Division of LWO Corp. / P.O. Box 17125 / 3841 North Columbia Boulevard / Portland, Oregon
503-286-5372 / fax [phone] / www.arboria.com
2 of 2
820.3163 Arbor Base updated 09/09/2005
STEP 2B STEP 3
Place large planters (minimum of 40 lbs. per side
recommended) on both sides of the arbor. This
will help to keep the arbor secure and plumb.
A
Attach braces to the outside of arbor base assembly,
then to arbor frame.