RyngDyng©
A short manual for installation and operation
A more explicit manual is provided here
https://www.archery-analytics.com/en/public/downloads.
1. Positioning of RyngDyng
Place RyngDyng at a distance of 3 m (= 3.3 yd. = 3 x length of case)
on the ground. The distance is measured between the case and the
foot point of the target center.
If the shooting distance is over 50 m (55 yd.), the reach of the Wi-Fi
network can be extended if you place the router about 15 m (16 yd.)
from RyngDyng and in direction to the shooting line. For a maximum
reach, place the router 1 – 2 m (3-6 yd.) above ground.
2. Start the RyngDyngApp
Install and start the RyngDyngApp on your
device. In order to get the full functionality of
the app, it is important you have a personal
account at www.archery-analytics.com and to
enter the login and password also in the app.
Installation of the app is most easily done by
scanning the QR Code. Detailed information regarding all functions
of the RyngDyngApp can be found here:
https://www.archery-analytics.com/en/public/ryngdyng/app
3. Power supply
First power on the Wi-Fi router using the USB charger or a USB
power bank. As soon as the Wi-Fi network is on, the red LED lights
up. Now you can power on RD600 by connecting the red cable with
the USB charger or with a USB-C power bank. RD720 has got a
dedicated power supply. During boot up, RyngDyng will
automatically connect to the Wi-Fi network.
Copyright Archery Analytics GmbH 2020 ©
4. Connect RyngDyngApp and RyngDyng
Hook up your device to the Wi-Fi network (SSID: RyngDyng,
Password is provided with the router).
In the app, go to page ‚Connections‘. RyngDyngs connected to the
network will be listed there. If not, try the button ‘search for
connected RyngDyngs’.
Press the button ‚connect with ryngdyngxy‘. As soon as the
connection is established, the indicator turns from red to green:
5. Aligning RyngDyng
The RyngDyngApp provides test images to enable proper
alignment (calibrations -> test image). The RyngDyng case
should be aligned in such a way that the red hair cross
points to the center of the target and the red lines appear
horizontal and vertical respectively. Turn the adjustable
stands if necessary. It is very important to provide for a solid
stand. On grass, better use a wooden board or stone plates
to place RyngDyng on.
6. Chessboard calibration
The chessboard stripes are pinned onto the target horizontally. The
printed marks support the vertical adjustment of the bands. The
center of the target should have the same distance to all 4
chessboards.
On the page ‘Chessboard calibration’, select and press the button
that fits the size of the target. The result of the calibration is shown in
an image as below:
7. Target face recognition
Remove the chessboard stripes and put the target faces on. Press
the button ‚recognize target faces‘. All target faces will be measured
automatically. The result is presented in the control image returned.
Every recognized target has got one or mere letters:
