3
Additional safety instructions
Do not allow any objects to fall onto, or any liquids to seep into the device.
If this occurs, pull the mains plug out of the socket and have the device examined by a
professional.
Place the device horizontally on a stable, even surface.
Take care to ensure that the device’s cooling system is not impaired.
Position the device so that the connections cannot be touched.
When the device is exposed to low temperatures (during transportation, for example), it
must only be switched on once it has reached room temperature and any condensation
that may have formed has evaporated.
The plug should be pulled out of the socket if the device is not in use for a while. Before
operating the device again, ensure that there are no short-circuits at the connection points
and that all connections are properly attached.
The user should carry out no works on this device other than the measures described in
this user’s manual.
Apart from the manual interventions described in the user’s manual, no works of any kind
must be performed on the device by the user. The device may only be opened by a
qualified professional. Repairs and fuse changes must be carried out by a specialist repair
shop.
In the event of damage or if an irregular function is suspected, it is mandatory to pull out
the plug immediately and have the device examined by a specialist repair shop.
If you have sensitive furniture on which you wish to place the device, we recommend a
neutral underlay in order to prevent potential colour staining by the device’s feet.
Always switch off the device using the standby switch on the front before cutting it off
from the electrical supply by activating the mains switch (on the rear of the housing) or
pulling out the plug.
