
Original-Bedienungsanleitung –AREBOS Portable Air Conditioner
4
1.2 General instructions
•Do not use any other means other than the ones recommended by the manufacturer to
speed up the cleaning or defrosting process
•Only use the device in rooms that are free from permanent sources of ignition (e.g. open
flame, switched-on gas appliances or electric heating)
•Do not pierce or burn.
•Note that refrigerants are odourless.
•Install, operate and store the device only in rooms with an area of at least 8 m² (AR-HE-
PAC7KW) / 12 m² (AR-HE-PAC9KW).
•Make sure the air influx and outflux are free from obstruction.
•The device must be stored in a well-ventilated area. The size of the storage room should
correspond to the room size specified for the operation.
•Any person working on a refrigerant circuit must have a certificate of competence from an
industry-accredited body that demonstrates its competence in the safe handling of
refrigerants using a procedure known in the industry.
•Service work may only be carried out in accordance with the manufacturer's specifications. If
additional persons are required for the maintenance and repair work, the person trained in
the handling of flammable refrigerants must constantly supervise the work.
•All operations involving special safety measures may only be performed by knowledgeable
persons.
Remarks
•The air conditioning is only suitable for indoor use, and is not suitable for other applications.
•Follow local grid interconnection rules while installing the air conditioning and ensure that it
is properly grounded. If you have any question on electrical installation, follow the
instructions of the manufacturer, and if necessary, ask a professional electrician to install it.
•Place the machine in a flat and dry place and keep a distance of above 50cm between the
machine and the surrounding objects or walls.
•After the air conditioning is installed, ensure that the power plug is intact and firmly plugged
into the power outlet, and place the power cord orderly to prevent someone from being
tripped or pulling out the plug.
•Do not put any object into the air inlet and outlet of the air conditioning. Keep the air inlet
and outlet free from obstructions.
•When drainage pipes are installed, ensure that the drainage pipes are properly connected,
and are not distorted or bended.
•While adjusting the upper and lower wind-guide strips of the air outlet, pluck it with hands
gently to avoid damaging wind-guide strips.
•When moving the machine, make sure that it is in an upright position.
•The machine should stay away from gasoline, flammable gas, stoves and other heat sources.
•Don't disassemble, overhaul and modify the machine arbitrarily, otherwise it will cause a
machine malfunction or even bring harm to persons and properties. To avoid danger, if a
machine failure occurs, ask the manufacturer or professionals to repair it.
•Do not install and use the air conditioning in the bathroom or other humid environments.
•Do not pull the plug to turn off the machine.
This product must not be disposed of with household waste!