Ares 18035 User manual

1. FEATURES
2. SPECIFICATIONS
3. WARNINGS
4. INSTRUCTIONS
5. WARRANTY
UNIVERSAL MASTER CYLINDER ADAPTER
(For use with ARES 70921 2L Manual Brake Fluid Bleeder and 18051 /
18053 4L Manual Brake Fluid Bleeder Kits)
OPERATIONS MANUAL
STORE THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE 1
18035
NEED HELP?
Don’t forget to register your product!
[phone]
www.arestool.com
[email protected]

2
18035
1. FEATURES
2. SPECIFICATIONS
•Brake refilling adapter with a 90° rotating coupling fits almost all vehicles on
the market.
•Fits master cylinder fill neck between Ø1.0”-3.1” / 26-79 mm.
•Maximum pressure up to 50 psi / 3.5 bar.
0.31" (8mm) height
adjusting screw 90° rotating coupling
Width adjusting nut
Adjustable wings
Material: chrome steel 4130
Brake fluid resistant
EPDM rubber
4.5” / 114 mm 7.1” / 180 mm
Ø1.0” / 26 mm Ø3.1” / 79 mm
0.55"
3.54” / 90 mm
3.78” / 96 mm
14mm”

3. WARNINGS!
4. INSTRUCTIONS
3
18035
•Always read the instructions carefully before using the tool.
•Ensure the working ares has adequate lighting.
•Keep children and unauthorized persons away from the working area.
•Clean all dirt from around the cover of the master cylinder before removing.
•DO NOT allow untrained persons to use this tool.
•Always wear eye protection that meets OSHA and ANSI Z87.1 standards.
•Always wear gloves when working with the tool.
•Always wear ear protection.
•Disposal: Customers should follow local regulations to handle used/waste parts.
•Brake fluid is hazardous. Read and follow fluid manufacturer's warnings.
•Brake fluid is corrosive and may damage automobile paint or other surfaces. If fluid spills, flush with
water immediately.
1. Unscrew the width adjusting nut to adjust the opening of the wings (Fig 1).
2. Fit the adapter on the master cylinder reservoir and loosely fit the wings on the filler neck (Fig 2).
3. Adjust the height by adjusting the screw and fix the adapter securely by turning the round nut until a complete seal is
formed (Fig 3).
4. Make sure the adapter is securely connected on the master cylinder filler neck before connecting the adapter to brake
service equipment (Fig 4).

4
18035
Please visit us at WWW.ARESTOOL.COM to register your
product and sign up for our ARES Tool Club
B6 MADE IN TAIWAN
HECHO EN TAIWAN
FABRIQUÉ À TAIWAN
ALWAYS WEAR EYE
PROTECTION THAT COMPLIES
WITH ANSI STANDARD
WARNING:
Cancer and Reproductive Harm-
www.p65Warnings.ca.gov
WARRANTY
You are backed by the ARES Tool Performance Assurance!
ARES TOOL warrants this product (excluding carrying cases and storage accessories and the
product categories set forth below) to the original purchaser for its useful life (not to exceed one
year for products with electrical or electronic components) against defects and deficiencies in
material and workmanship.
This LIMITED LIFETIME WARRANTY does not cover products which in ARES Tool's judgement
have been subject to negligence, misuse, abuse, accident, improper storage, alteration, improper
repair, disassembly and/or reassembly. Normal wear and tear are also excluded. Deficient products
will be replaced or repaired.
Please call or email at [phone] / [e-mail] for more details or to receive support.
This warranty excludes blades, bits, bit sockets, carrying cases, pouches, torque products,
punches, dies, bulbs, fuses, batteries, and other consumables which must be replaced under
normal use and service. These warranties set forth herein are the sole warranties applicable to
Products and is in lieu of all other warranties, whether expressed, implied or statutory.
The implied warranties of merchantability and fitness for a particular purpose are specifically
excluded. Customer's sole and exclusive remedy for breach of this Warranty is, at the option of
ARES TOOL, repair or replacement of the defective product.
UNIVERSAL MASTER CYLINDER ADAPTER
(For use with ARES 70921 2L Manual Brake Fluid Bleeder and 18051 /
18053 4L Manual Brake Fluid Bleeder Kits)