Arista ADM-5842BP-0XX User manual

Talk to us. We listen.
Thank you for purchasing the ADM-5842BP-0XX Industrial LCD Display. We are condent that you will
be pleased with the performance and reliability of your new display. The display is designed to meet
the screen performance requirements of today's demanding industrial applications. While complying
with a wide variety of industrial video formats, it delivers a larger screen area, higher resolutions, and
greater color accuracy than many displays in its price range.
42" FHD-Compatible Widescreen Industrial LCD Display
USER MANUAL
ADM-5842BP-0XX
Publication date: 2014/08/26
Version No.: V2.1

2
Read all of these instructions and save this manual for later use. Follow all warnings and
instructions on the product.
• Relative humidity: 25%~80%
• Storage temperature: -20oC to 60oC(-4F to 140F)
• Operation temperature: 0~50oC(32F to 122F)
• Unplug the unit when not in use for an extended period of time.
• Consult a service technician if the display does not operate normally when you have
followed the instructions in this manual.
• Do not attempt to repair this product yourself. Always get a qualified service
technician to carry out adjustments or repairs.
• Do not place heavy objects on the unit.
• Use only the power cord supplied with the unit. In the event that another power cord
is used, one that is different than the one provided by the supplier, make sure that it
iscertiedbythelocalandapplicablenationalstandards.
• If the power cable is faulty in any way, please contact the manufacturer or the
nearest authorized repair service provider for a replacement.
• The power supply cord is used as the main disconnect device. Ensure that the socket
outlet is easily accessible after installation.
• Overloaded AC outlets, extension cords, frayed power cords, and broken plugs are
extremelydangerous.Theymay,andcan,resultinanelectricalshockorrehazard.
Call an authorized service technician for any replacements.
• Hands must be dry when plugging in the power cord into an AC outlet to prevent
electrical shock. Do not damage the power cord by disassembling, bending, pulling
orexposingittoheatasitmaycauseareorelectricalshock.
• Make sure to completely insert the power plug. Insecure connections can cause a
re.
• Unplug the display if cleaning is needed. The screen may be wiped with a dry or
slightly damp cloth when the power is off.
Product safety precautions

3
Contents
Product safety precautions ........................................................................................... 2
Contents.......................................................................................................................... 3
Chapter 1 Welcome .........................................................................................................4
Features........................................................................................................................................ 4
Product specications................................................................................................................ 5
Unpacking .................................................................................................................................... 6
Chapter 2 Basics ........................................................................................................... 7
Interfaces and remote control.......................................................................................................7
Remote control...............................................................................................................................8
Remote OSD .................................................................................................................................10
Conguration................................................................................................................................11
Physical dimensions ...................................................................................................................12
Chapter 3 Connections ................................................................................................14
Pins in the DVI port.....................................................................................................................14
Pins in the VGA port...................................................................................................................15
Pins in the RS-232 touch port....................................................................................................16
Mounting the display..................................................................................................................16
Connecting through VGA/DVI. ..................................................................................................18
Connecting the touch interface via RS-232 or USB cable .....................................................19
Connecting the Remote OSD.....................................................................................................19
Connecting the power supply...................................................................................................20
Checking connectivity for the ADM-5842BP-0XX....................................................................21
Chapter 4 Settings..........................................................................................................22
Installing the eGalaxTouch Utility..............................................................................................22
Using the eGalaxTouch Utility....................................................................................................23
OSD settings................................................................................................................................25
Chapter 5 Appendix........................................................................................................28
Maintenance and Troubleshooting ...........................................................................................28
Product Limited Warranty...........................................................................................................29
Frequently Asked Questions......................................................................................................33
Disposal and Recycling Information ........................................................................................34
Disclaimer and Copyright Notice..............................................................................................34

4
• 42” Active Max TFT LCD display, full HD 1920 x 1080 resolution(DVI input)
• 16:9(wide) aspect ratio for the display.
• LCD protected by tempered glass.
• Computer video signals of VGA, SVGA, XGA, SXGA, WXGA, UXGA, WUXGA standard.
• Supports vertical refresh rate of up to 75Hz for VGA, SVGA and XGA of VESA standard
specication.
• DVI, VGA function supported.
• True XGA with expansion support from DOS, VGA, SVGA.
• Analog RGB signal direct input offers multiscan function.
• Color supports up to 8 bits per color, total 16.7 million colors.
• Strengthenedprotectiveglass(anti-reectiveoptional).
• Sunlight readable option
• High brightness, contrast, and wide viewing angles
• Single control operation and transparent On-Screen-Display (OSD) user interface. Full
control of all relevant display and interface parameters via OSD.
• Meets IP-50 requirements.
• Easy plug and play DVI ensures true digital experience.
Features
Chapter 1 Welcome

5
Product specications
-0XX

6
Unpacking
Open the package and inspect the items carefully to make sure no item is damaged and all
items listed are present in your package.atures
6 feet AC power cord x1
Driver CD Rom x1
ADM-5842BP-0XX Display x1
6 feet USB cable x1 6 feet VGA cable x1
Remote OSD x1 Remote control x1
6 feet DVI cable x1
AC/DC Power supply x16 feet RS-232 cable x1

7
Interfaces and remote control
Front View
1
Display screen
2
Power indicator- green for working mode, red for
standby mode.
3
Remote control IR receiver
4
DC 24V input
5
Ground terminal
6
Remote OSD connector
7
DVI port
8
VGA port
9
RS-232 port (for touch screen)
10
USB port (for touch screen)
Rear View
Chapter 2 Basics

8
Remote Control
1
2
3
4
5
6
7
Buttons Description
1POWER •Poweronorpoweroff.
2MENU •Press MENU to bring up the settings menu such as:
Brightness, Contrast, etc.
3UP •Move the cursor or increase the data value of settings.
4▼DOWN • Move the cursor or decrease the data value of settings.
5INFO •Presstodisplaychannelinformation,resolution,color
space, etc.
6Reset •Resetsettingstofactorydefaults.
Mute •Presstoeliminateorrestoreplaybacksound.
7

9
Push 1and pull 2to open the
battery compartment. Insert the
battery and match the (+) and (-) on
the battery to the indicated marks.
Point the remote control unit no more than 5
meters from the sensor and within 60° of the
front of the display.
Note:
•The battery in the Remote Control normally lasts for about one year, although this depends
on how often and for what operations the Remote Control is used for.
•Use a 3V lithium battery (No. CR2025 or equivalent).
•Be careful when you press the slot of the battery compartment. Apply pressure gently with
yourngernailstoavoiddamages.
•Please take caution in using small button batteries and cell batteries as they are potential
choking hazards for young children. Keep stray and loose batteries away from children.
•Seek medical advice if you believe a cell or button battery has been swallowed.
•The battery must be disposed of properly according to local laws and regulations.
Using the Remote Control Correctly
Battery Installation for the Remote Control
5M Maximum
distance
Remote
Sensor
30°
30°
+
CR2025
1
2

10
The remote OSD(on screen display) that came with the unit is used for
operating the on screen controls on the display. Users can also afx it onto
a wall or board for ease of use and convenience.
Remote OSD
Connecting the Remote OSD
Follow the steps outlined below to connect the Remote OSD:
• Step1:Asshowninthegurebelow,theRemoteOSDcanbeafxedtoawall,board
or bracket with the use of screws.
• Step2: Use the Remote OSD cable to connect to the connector located at the rear of
the ADM-5842BP-0XX.
Rear panel
Remote OSD
(supplied)
Buttons Description
AUTO Press this button to automatically adjust the display aspect ratio.
LEFT/Right Press for selecting, navigating or adjusting values in the menu/option
screen.
MENU Press to display the options/menu screen
INPUT Presstoconrmselection.
POWER Power On/Off control.
AUTO LEFT MENU RIGHT INPUT POWER

11
Conguration
There is a label located on the back of the unit that shows the unit’s serial number and
conguration.Theserialnumberisuniquetotheunit,andthecongurationindicatesthe
options the unit was built with.
Thecongurationisgivenintwoparts:themodelnumberandtheorderinformation.
Model number
The model number can be parsed as followed:
For more detailed technical information, including configuration layout, please contact
Arista customer support at [phone], ext. 400
ADM-58 4 2 B P
LCD Size Mounting Scheme
Environmental Protection
ADM-5842BP-000 ADM-5842BP-001 ADM-5842BP-Z00 ADM-5842BP-Z01
LCD Display 42" Wide Screen 42" Wide Screen 42" Wide Screen 42" Wide Screen
Touch Screen IR IR No Touch No Touch
Bezel Black Color Black Color Black Color Black Color
Power Supply 24VDC Input 110/220VAC Input 24VDC Input 110/220VAC Input
ADM-5842BP-
000-VHB
ADM-5842BP-
001-VHB
ADM-5842BP-
Z00-VHB
ADM-5842BP-
Z01-VHB
LCD Display 42" VHB Wide
Screen
42" VHB Wide
Screen
42" VHB Wide
Screen
42" VHB Wide
Screen
Touch Screen IR IR No Touch No Touch
Bezel Black Color Black Color Black Color Black Color
Power Supply 24VDC Input 110/220VAC Input 24VDC Input 110/220VAC Input
Order information
The ordering information for each conguration is dened below.

12
Physical dimension
ThediagrambelowshowsthephysicalandspecicdimensionsoftheADM-5842BP-0XX.
Model Number L(Overall
Length)
W(Overall width) Height Weight
ADM - 5842BP-0XX 42.85” 26.85” 5.04” 47 kg
Rear view
Front view

13
This section describes the connections/connectors available on the ADM-5842BP-0XX
industrial VESA mount LCD display.
Connectors are located at the bottom of the ADM-5842BP-0XX display
Warning! Make sure your display is grounded at all times. Also make sure
that it is on the same ground as any other equipment connected to its
communications ports.
Connectors
Chapter 3 Connections

14
Pins in the DVI port
DVI signal input connector
Pin NO. Pin Assignment Pin Description Remark
1 RXD2- T.M.D.S Data 2-
2 RXD2+ T.M.D.S Data 2+
3 GND T.M.D.S Data 2 Shield
4 NC No connection
5 NC No connection
6 SCL DDC clock
7 SDA DDC data
8 NC No connection
9 RXD1- T.M.D.S Data 1-
10 RXD1+ T.M.D.S Data 1+
11 GND T.M.D.S Data 1 Shield
12 NC No connection
13 NC No connection
14 DVIVCC + 5V power input
15 GND Ground
16 HPD Hot plug detect
17 RXD0- T.M.D.S Data 0-
18 RXD0+ T.M.D.S Data 0+
19 GND T.M.D.S Data 0 Shield
20 NC No connection
21 NC No connection
22 GND T.M.D.S Clock Shield
23 RXDC+ T.M.D.S Clock +
24 RXDC- T.M.D.S Clock -
25 NC No connection
26 NC No connection
27 NC No connection
28 NC No connection
29 NC No connection
81 2 3 4 5 6 7
10 111213 141516
24
25 26
28
29
27
23222120191817
9

15
Pins in the VGA port
VGA signal input connector
Pin NO. Pin Assignment Pin Description Remark
1 VGA R VGA Red signal
2 VGA G VGA Green signal
3 VGA B VGA Blue signal
4 NC No connection
5 GND Ground
6 GND Ground
7 GND Ground
8 GND Ground
9 NC No connection
10 GND Ground
11 NC No connection
12 TXD ISP program upgrade TXD signal serial transmit data
13 VGA HS VGA H-Sync signal
14 VGA VS VGA V-Sync signal
15 RXD ISP program upgrade RXD signal Serial receive data
15 4 3 2
6
78910
15 14 13 12 11

16
Pins in the RS-232 touch port
3 1245
9 8 7 6
Mounting the display
I1. Mounting the display using VESA mounts and wall bracket
“VESA FDMI Standard” stands for Video Electronics Standards Association Flat Display
Mounting Interface Standard. ADM-5842BP-0XX needs be mounted on a VESA-compliant
arm or bracket. And on the ADM-5842BP-0XX display, holes have been pre-drilled on the
rear of it.
As the below gure shown, Please follow the steps to mount the display.
• Step 1: Place two VESA mounts on the back of the ADM-5842BP-0XX, and align the
holes on the VESA mounts with the holes on the display.
• Step 2: Use a screwdriver to tighten the eight “M8” sized screws to fix the VESA
mounts on the display.
• Step 3: Place one wall bracket on the wall or board, and align the holes on the
bracket with the holes on the wall or board.
• Step 4: Useascrewdrivertotightenthescrewstoxthewallbracketonthewallor
board.
• Step 5: Mount the display onto the wall or board through the VESA mount and wall
bracket.
RS-232 signal input connector
Pin NO. Pin Assignment Pin Description Remark
1 NC No connection
2 TX ISP program upgrade TXD signal serial transmit data
3 RX ISP program upgrade RXD signal Serial receive data
4 NC No connection
5 GND Ground
6 NC No connection
7 NC No connection
8 NC No connection
9 NC No connection

17
Warning! The ADM-5842BP-0XX display needs be mounted on a VESA-
compliant mount and wall bracket. Failure to properly and securely situate the
display can result in injury to personnel or damage to equipment.
2. VESA mounting
Model Number Mounting
ADM-5842BP-0XX 100 x 400mm/3.94 x 15.75 inch

18
Connecting through VGA and DVI
Notes:
If, for any reason, the display goes blank and gives an “Out of Range” or “No Input
Signal”, your system source is outputting a signal that goes beyond or is incompatible
with the LCD’s video A/D board. If this happens, make sure the correct signals are
inputted. If the display doesn’t work properly, it may be because:
• TheresolutionistoohighortoolowfortheLCD.
• Thepowersupplyisincorrectorinsufcient.
Rear panel
VGA connector
DVI
connector
VGA cable(supplied)
DVI cable(supplied)
• Connect one end of the VGA or DVI cable to the VGA or DVI port of the ADM-5842BP-0XX
LCD display. Connect the other end of the VGA or DVI cable to the VGA or DVI port of
a computer.
ARISTA BOXPC-138G
(Sold separately)

19
• Follow the steps outlined below to connect the Remote OSD:
• Step1:Asshowninthegurebelow,theRemoteOSDcanbeafxedtoawall,boardor
bracket with the use of screws.
• Step2: Use the Remote OSD cable to connect to the connector located at the rear of
the ADM-5842BP-0XX.
Rear panel
Rear panel
USB cable(supplied)
Remote OSD(supplied)
RS-232 cable(supplied)
Connecting the touch interface via RS-232 or USB cable
• Connect one end of the RS-232 or USB cable to the RS-232 or USB port of the ADM-
5842BP-0XX LCD display. Connect the other end of the RS-232 or USB cable to the
RS-232 or USB port of a computer(The touch screen panel for users is optional. ).
Connecting the Remote OSD
ARISTA BOXPC-138G
(Sold separately)

20
• Connect one end of the AC/DC power supply to the DC-in(24V) connector of the display.
Connect the other end of AC/DC power supply to an AC outlet.
Rear panel
DC Power cable
(supplied)
AC outlet
Connecting the power supply
The AC to DC 24V power supply provided with ADM-5842BP-0XX does not have
environmental protection. In order to meet a degree of protection, the power supply has to
beinstalledinaspecicIPratingenclosure.
screws
Industrial
Enclosure
Step1 Step2 Step3
Power supply
In order to correctly install the
power supply, the specific
dimensions for the power
supply are given in the
guretotheright.