Arkon APTTGO 530 User manual

Package Contents:
(1) APTTGO - Adapter plate for TomTom GO pattern
(1) AP032 - Dual-T to 4-hole AMPS adapter plate with screws and nuts
!Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
The Mobile Mounting Specialists™
Consumer Hotline:
USA [phone]
INT’L [phone]
Monday - Friday 9 am - 5 pm, PST
Do not place mount in or near an air bag deployment zone.
!
Console Mounting VSM Bracket
Connect Adapter plate to VSM Bracket
Step 1.
Step 1.
APTTGO-VSM
|VSM 4 Hole AMPS Adapter Mount for TomTom® GO™ Series
AP032
Dual-T to 4-hole
AMPS Adpter plate
Patent Pending
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in China and Taiwan
© Copyright 2008 Arkon Resources, Inc.
Find a safe location on the console to install the vehicle
specic mount (VSM) sold by other manufacturers. The VSM
bracket is not included in this kit. Follow the manufacturers
instructions for installing VSM bracket.
Place the Dual-T to 4-hole AMPS adapter plate against the
VSM bracket. Using a screwdriver, tighten the screws into
the nuts behind the adapter plate. See diagram below.
Connect the dual T-slots (A) on TomTom adapter plate to the
dual T-tabs (B) on the dual-T to 4-hole AMPS adapter plate.
Slide the adapter plate up into the grooves on the back of the
TomTom GO series device (not included, sold separately).
Step 1.
A
B
Compatible with:
• TomTom GO 520, 530, 720, 730, 920, 920P, and 930 models
APTTGO
Adapter Plate for
TomTom GO
Connect TomTom Device to Pedestal
Connect Adapter Plate to TomTom Device
TomTom brand name and product names are trademarks, or registered trademarks of TomTom
International BV. Arkon Resources, Inc. is not aliated with TomTom International BV.