Arlec Samie EFH211 User manual

For all Sales & Warranty enquiries
Arlec Australia Pty. Ltd. ACN 009 322 105
(“Arlec”) gives the Warranty.
Building 3, 31 – 41 Joseph Street, Blackburn North, Victoria, 3130
Blackburn North LPO, P.O. Box 1065, Blackburn North, 3130
Customer Service: [phone]
Email: [email protected]
CPIN002602
Arlec guarantees this product in accordance with the Australian
Consumer Law.
Arlec also warrants to the original first purchaser of this product
(“you”) from a retailer that this product will be free of defects
in materials and workmanship for a period of 12 months from
the date of purchase; provided the product is not used other
than for the purpose, or in a manner not within the scope of the
recommendations and limitations, specified by Arlec, is new and
not damaged at the time of purchase, has not been subjected
to abuse, misuse, neglect or damage, has not been modified or
repaired without the approval of Arlec and has not been used for
commercial purposes (“Warranty”).
If you wish to claim on the Warranty, you must, at your own
expense, return the product, and provide proof of original purchase
and your name, address and telephone number, to Arlec at the
address below or the retailer from whom you originally purchased
the product within 12 months from the date of purchase.
Arlec will (or authorise the retailer to) assess any claim you may
make on the Warranty in the above manner and if, in Arlec’s
reasonable opinion, the Warranty applies, Arlec will at its own
option and expense (or authorise the retailer to) replace the
product with the same or similar product or repair the product and
return it to you or refund the price you paid for the product. Arlec
will bear its own expenses of doing those things, and you must bear
any other expenses of claiming on the Warranty.
The Warranty is in addition to other rights and remedies you may
have under a law in relation to the product to which the Warranty
relates.
Our goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled
to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
Model EFH211
Max Heating Power 2000W max
Rated Frequency 50Hz
Rated Voltage 220-240V ~
Bulb Wattage25W/bulb (2 bulbs)
Bulb Size & Type E14 candle
USER MANUAL
TECHNICAL SPECIFICATIONS
WARRANTY
2000W
Fireplace HeaTer
WITH realIsTIc flame effecT
Samie
USER MANUAL
FOR PERSONAL INDOOR USE ONLY
EFH211
WARNING!
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,
OR PERSONAL INJURY, READ, UNDERSTAND
AND FOLLOW INSTRUCTIONS BEFORE
USING THIS HEATER
Keep this manual in a safe place for future reference
CPIN002602
1. Before cleaning, turn off the heater, unplug the power cord and allow the
heater to cool.
2. Do not immerse cord, plug or heater into water or other liquid or pour water or other
liquid over the heater.
3. Use a vacuum cleaner to remove dust and dirt from air openings.
4. Clean exterior surfaces using a solution of water and mild detergent with wrung
out damp sponge. Use and wring out the damp sponge and wipe the exterior
surface again.
5. Finally wipe with a dry cloth. Allow sufficient time to dry before plugging electrical
cord into outlet.
6. The tempered glass front panel can be clean with glass cleaner detergents.
7. Any other servicing should be performed by an authorised service representative.
8. Do not use the heater if it has malfunctioned or become damaged in any way.
MAINTENANCE & CLEANING

IMPORTANT SAFEGUARDS
1. Read all instructions before using this heater.
2. This heater is hot when in use.
To avoid burns, do not let bare skin touch hot
surfaces.
Use handles when moving this heater. Keep
combustible material such as drapery and
other furnishings, at least 1 metre from the
heater.
When in use keep the mains cord of the heater
from touching the heater body. Do not drape
the cord over the heater while hot..
Extreme caution is necessary when any
heater is used by or near children or invalids
and whenever the heater is left operating
unattended.
3. Always unplug heater when not in use.
4. Do not operate any heater with a damaged
cord or plug or after the heater malfunctions,
has been dropped or damaged in any manner.
Return heater to suitably qualified facility
for examination, electrical or mechanical
adjustment or repair.
5. Do not use outdoors, the product is designed
only for household use.
6. Never locate heater where it may fall into a
bathtub or other water container.
7. Do not run cord under carpeting.
Do not cover cord with throw rugs runners, or
the like. Keep cord away from traffic areas to
avoid tripping over.
8. To disconnect heater, turn controls to off, then
remove plug from outlet.
9. Connect to properly earthed socket-outlet of
the appropriate voltage.
10. Do not insert or allow foreign objects to
enter any ventilation or exhaust opening as
this may cause an electric shock or fire, or
damage the heater.
11. To prevent a possible fire, do not block the
grilles in any manner.
12. Do not use in areas where petrol, paint, or
flammable liquids are used or stored.
13. Use the heater only as described in this
manual. Any other use not recommended by
the manufacturer may cause fire, electric
shock, or injury.
14. Do not connect via double adapters
or power boards. Avoid the use of an
extension cord because the extension cord
may overheat and cause risk of fire. However,
if this heater is used with an extension cord,
use as short a cord as practical.
15. Do not use this appliance with a programmer,
timer or any other device that switches the
heater on automatically, since a fire risk
exists if the appliance is covered or positioned
incorrectly.
16. In order to avoid overheating, do not cover
the heater.
17. There are no user serviceable parts installed
in this heater.
18. For additional protection, the use of Residual
Current Device (RCD) with a tripping current
not exceding 30ma is recommended.
19. Keep these instructions handy for future
reference.
CAUTION
• Thisheateristobeoperatedonlyinupright
position.
• Whentheheaterisnotinuse,storeinacool
drylocation.
• Donotstoreuntiltheheatercoolsdown.
WARNING
• Thisapplianceisnotintendedforuseby
young children or infirm persons unless
they have been adequately supervised by a
responsible person to ensure that they can
use the appliance safely.
• YoungChildrenshouldbesupervised
to ensure that they do not play with the
appliance.
• Theheatermustnotbelocatedimmediately
below a power outlet.
• Donotusethisheaterintheimmediate
surroundings of a bath, shower or
swimming pool.
• Thisapplianceisheavy;twopeopleare
recommended for lifting
OPERATING INSTRUCTIONS
1. Find a spot and place the fireplace heater in
position. The appliance is heavy; two people
are recommended for lifting. Make sure you
have at least 200mm from back wall and the
mains cord is not squashed in any manner.
2. Unpack the pebbles from the bag and place
them along the flame effect log in the
desired position.
3. Plug to heater to a standard 10 ampere
socket. The heater is now ready for use.
4. For realistic flame effect press the fame
effect switch to position marked ‘I’ on the
switch. To turn off the fame turn the switch
back to position ‘0’.
5. For low heat setting (1000W) press the low
heat setting switch to position marked ‘I’. To
turn on the heat setting to high heat (2000W)
press the high heat setting button to position
marked ‘II’. To turn off the heater press the
high setting button to position marked ‘I’ and
low heat setting button to position marked
‘0’. Low heat setting must be ON to set the
heater on high heat setting 2000W (I +II).
SAFET Y CUT-OFF
1. This appliance is fitted with a safety
cut-off which will operate if the heater
overheats(eg. due to blocked air vents).
For safety reasons, the heater will NOT
automatically reset.
2. To reset the appliance, disconnect the
appliance from the mains supply for at least
30 minutes. Reconnect the supply to the
mains and switch on the appliance.
REPLACING THE FLAME
EFFECT LAMP
Warning–Alwaysdisconnectfromthepower
supplybeforeremovingbulb.
Warning–Thebulbsreachhightemperatures
duringoperation.Allowthebulbstocool
downafterswitchingofftheappliance
beforechanginglamps.
1. To replace the bulb locate the four screws on
the rear of the unit.
2. Unscrew the screws and lift the lamp
replacement bracket out.
3. Unscrew the globes by turning them
anticlockwise and pull them out. Replace the
existing globes with globes of same wattage
25W E14 candle shape. Secure the new
globes by turning them clockwise.
4. To reassemble , put the lamp replacement
bracket to the rear plate and secure it with
the four screws .
Rear plate
screws
CPIN002158/3
Flameeffect
ON/OFF
Highheat
setting2000W
HeatpowerON/OFFand
lowheatsetting1000W