Arlo Technologies Total Security Mount User manual

© Arlo Technologies, Inc. Arlo, Arlo logo, and Every Angle
Covered are trademarks of Arlo Technologies, Inc. Other
trademarks are for reference purposes.
For regulatory compliance information including the EU
Declaration of Conformity and e-label information for the
US FCC and Industry Canada, visit
www.arlo.com/about/regulatory/.
Arlo Technologies Intl. Ltd.
Ground Floor, Building 3
University Technology Center
Curraheen Road, Cork, T12 EF21
Ireland
Arlo Technologies, Inc.
2200 Faraday Avenue, Suite 150
Carlsbad, CA 92008 USA
What’s in the box
Total Security Mount
Housing
Security Key
Total Security Mount
Back Plate
Screw Kit
Total Security Mount
March 2020

Need help?
We are here for you.
For more information about installing the
Total Security Mount, scan this QR code
or visit https://arlo.com/TotalSecurity.
Visit www.arlo.com/support for quick answers
and resources:
• How-to videos
• Troubleshooting tips
• The Arlo Support phone number for your
location
Set up your Total Security Mount
1. Place the back plate with
the arrow pointing up and
secure it with screws.
For drywall, use the wall
anchors we provide.
2. Insert your camera with its battery into
the Total Security Mount housing.
3. To attach the housing to the back plate:
Align the small screw in the housing with
the dot on the back plate.
Turn the housing
clockwise until it
clicks in place.
Use the security key
to tighten the small
screw.
4. Adjust your camera
position, then nger-tighten
the mount lock (clockwise)
to lock the camera in this
position.
Note: To release your camera from the
housing, insert the security key in the
release button
and turn the key
clockwise.