Sanus FMF319-B2 User manual

FMF319
- B 2
INSTRUCTION MANUAL
WE’RE HERE TO HELP
Our US-based install experts
are standing by to help.
Call us at:
US: 800-359-5520
EMEA: [phone]
UK: 0800 056 2853
Or, chat at:
SANUS.com/chatSV
Get it right the first time.
HeightFinder™ shows you
where to drill.
Check it out at:
SANUS.com/2808
Want to watch a video that
shows how easy this DIY
project will be?
Watch it now at:
SANUS.com/2999
Texto en español, página 12 Deutscher Text Seiten 16 Svensk text sida 20
中文文字说明请参见第 24 页
Texte français page 14 Nederlandse tekst op pagina 18
Русский текст: стр. 22 日本語は 26 ページ

2
Tools Needed
Call Customer Service
Wall
Construction
ONLY install on
these acceptable
wall types. Drywall alone
will NOT hold the
weight of your TV.
Unsure
wood studs
ACCEPTABLE
CAUTION:
DO NOT install
in drywall alone
55 lbs.
(24.9 kg)
TV Weight Limit
(including accessories)
DO NOT EXCEED
If your TV (plus accessories) weighs MORE, this
mount is NOT compatible.
Visit SANUS.com or call customer service to find a
compatible mount.
Wood Stud Install
Concrete Install
Awl
Pencil Level Tape
Stud
Finder
ScrewdriverTape
Measure
Drill Bit
Electric
Drill
Hammer
Socket
Wrench
Drill Bit
3/8 in.
(10 mm)
Concrete
Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Check your TV owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact
Customer Service: US: 800-359-5520 •EMEA: [phone] •UK: 0800 056 2853
CAUTION: Avoid potential personal injuries and property damage!
•This product is designed ONLY to be installed into wood stud, solid concrete or concrete block.
—DO NOT INSTALL INTO DRYWALL ALONE — DRYWALL ALONE WILL NOT HOLD THE WEIGHT OF YOUR TV.
•This product is designed for INDOOR USE ONLY.
•The wall must be capable of supporting five times the weight of the TV and mount combined.
•Do not use this product for any purpose not explicitly specified by manufacturer.
•Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
7/32 in.
(5.5 mm)
Wood
1/2 in.
(13 mm)
Solid concrete or
concrete block
Concrete kit CMK1 is
Required (not included)
Contact Customer Service to inquire
about the additional hardware.
IMPORTANT SAFETY INSTRUCTIONS
– PLEASE READ MANUAL PRIOR TO USE – SAVE THESE INSTRUCTIONS

3
Dimensions
2.95in
75mm
MIN 15.75in
400mm
MAX
15.75in
400mm
MAX
2.95in
75mm
MIN
8.46in
215mm
2.68in
68mm
6.89in
175.1mm
18.02in
457.6mm
18.34in
465.9mm
50deg
2.44in
61.9mm
19.21in
487.9mm
5
up
15
DOWN
SIMULATED 55"
FLAT SCREEN TV
WALL IS ON RIGHT
WALL IS ON RIGHT
WALL IS ON TOP
WALL IS ON TOP
TV INTERFACE
WALL PLATE TOP VIEW - EXTENDED
3-D
SIDE VIEW - EXTENDED
SIDE VIEW RETRACTED
TOP VIEW - RETRACTED
FULLY ASSEMBLED MOUNT
BEFORE YOU BEGIN
Remove the stand
from your TV —if attached.
Install any accessories
you may have purchased, if they require TV
removal prior to assembly. The TV is removable
for future accessory purchases.
Soft clean surface
Protect the face
of your TV when laying it down for
installation.

4
NOTE: Not all hardware included will be used.
WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If
any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service.
Never use damaged parts!
Supplied Parts and Hardware
2.5mm
M4
M6 / M8 22mm
M5 x 6mm
M5 x 8.5mm
M8 x 50mm
M8 x 16mm
M6 x 20mm
M6 x 12mm
M4 x 12mm
M6 x 35mm
M4 x 35mm
M8 x 50mm
M8 x 16mm M8 x 20mm
M8x30 mm M8 x 40mm
5mm
M8 x 25mm
M8 x 35mm
5/16 x 2¾in.
5/16 in.
Fischer UX10 x 60R Anchor
STEP 1 Parts and Hardware
TV Bracket Horizontal
TV Bracket
Vertical
TV Bracket
Screw
TV Screws
(qty. 4 each) [Only one size fits your TV] Washers
(qty. 4 each)
Spacers
(qty. 4 each)
[If necessary]
03
02
01
M4
M4
M6/M8
M4/M6/M8
M6
M8
(qty. 1)
05
(qty. 4)
06
(qty. 2)
04
2.5mm
M4
M6 / M8 22mm
M5 x 6mm
M5 x 8.5mm
M8 x 50mm
M8 x 16mm
M6 x 20mm
M6 x 12mm
M4 x 12mm
M6 x 35mm
M4 x 35mm
M8 x 50mm
M8 x 16mm M8 x 20mm
M8x30 mm M8 x 40mm
5mm
M8 x 25mm
M8 x 35mm
5/16 x 2¾in.
5/16 in.
Fischer UX10 x 60R Anchor
Parts and Hardware for STEP 2 Hardware for STEP 3
(qty. 1)
07
(qty. 1)
08
(qty. 2)
09
(qty. 2)
10
(qty. 1)
11
Locking Screw
Lag Bolt
Washer
(Lag Bolt)
Drilling
Template
Arm Assembly
STEP 2B: Concrete Installation Kit CMK1 [NOT INCLUDED]
Contact Customer Service to inquire about the additional hardware.
Concrete Anchor
C1
(qty. 2)
CAUTION: Do not use in drywall or wood

5
1
04
04
2
TYPICAL INSTALLATION ILLUSTRATED.
02 01
ANO SPACER
03 02
01
BSPACER NEEDED
NOTE: If needed, orient the TV brackets so
they do not interfere or protrude beyondthe
edges of your TV.
400 mm [ 15.7 in. ]
300 mm [ 11.8 in. ]
200 mm [ 7.9 in. ]
100 mm [ 3.9 in. ]
75 mm [ 3.0 in. ]
Standard TV (VESA) Hole Patterns
06
04
05
STEP 1 Attach TV Bracket to TV
1.3 Attach TV Brackets to Your TV
CAUTION: Avoid potential personal injuries and property damage!
DO NOT use power tools for this step.
Tighten screws 01 only enough to secure the TV brackets 04 to the TV.
Do not overtighten.
CAUTION: Avoid potential personal injuries and property damage!
DO NOT use power tools for this step.
Tighten screws 06 only enough to secure the TV bracket 05 .
Do not overtighten.
05
06
04
• Flat Back TV
[TV brackets lay flat on your TV]
NO SPACER SPACER NEEDED
AB
Only one screw size fits your TV.
M4 M6 M8
01
Use short TV screws 01 .
Spacers 03 not needed. Use long TV screws 01 and spacers 03 to create
extra space between the TV and TV bracket.
• Flat Back TV with extra space needed
[for deep inset holes or cable interference]
• Rounded or Irregular Back TV
[TV brackets NOT resting flat on your TV]
CAUTION: Verify adequate thread engagement with your screw 01 , washer 02 ,
spacer 03 combination AND TV bracket 04 .
— Too short will not hold your TV. — Too long will damage your TV.
1.2 Select TV Screw Length and Spacers1.1 Select TV Screw Diameter
NOTE: If your TV
included inset spacers or
adapters, use them UNDER
the mount hardware.

6
12
07
3
4
A
08
08
07 2 ¾in. (70 mm)
7/32 in.
(5.5 mm)
5
09 10
08
STEP 2A Attach Wall Plate Wood Stud Installation
CAUTION: Avoid potential personal injury or property damage!
•Drywall covering the wall must not exceed 5/8 in. (16 mm)
•Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1½ x 3½ in. (38 x 89 mm)
•Stud center must be verified
Max.
5/8 in. (16 mm)
CAUTION: Avoid potential personal injury or property damage!
Improper use could reduce the holding power of the lag bolt 09 .
Tighten the lag bolts 09 only until the washers 10 are pulled FIRMLY against the
wall plate 08 . DO NOT over-tighten the lag bolts 09 .Go to STEP 3 on PAGE 8.

7
4
A
08
08
1 2
3/8 in.
(10 mm)
3 in. (76 mm)
002862.eps
07
07
3
5
08
CAUTION: Avoid potential personal injury or property damage!
•Mount arm assembly 08 directly onto concrete surface (no wall covering)
•Minimum solid concrete thickness: 8 in. (203 mm)
•Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
Solid Concrete or Concrete Block Installation
STEP 2B Attach Wall Plate
C1
09 10
Concrete Installation Kit CMK1 is not included
Contact Customer Service to inquire about the
additional hardware.
CAUTION: Avoid potential personal injury or property damage!
Improper use could reduce the holding power of the lag bolt 09 .
Tighten the lag bolts 09 only until the washers 10 are pulled FIRMLY against
the wall plate 08 . DO NOT over-tighten the lag bolts 09 .
Fischer UX10 x 60R C1 - included in the Concrete
Installation Kit CMK1.
Go to STEP 3 on PAGE 8.

8
CAUTION: Avoid potential personal injury or property damage!
Locking screw 11 must be installed to secure the TV to arm assembly 08 .
3.1 Secure Cover Plate
1 2
08
05
05
08
11
08
05
A
A
08
3.2 Attach TV to Arm Assembly
STEP 3 Attach TV to Arm Assembly
HEAVY! You may need assistance with this step.

9
ab
Manage Cables
1
IMPORTANT: Fully extend arm assembly 08 to ensure enough slack in cables.
3
2
C
C
C
C
08

10
TILT ADJUSTMENT
LEVEL ADJUSTMENT
08
11
11
T
TV Adjustments
Your TV should adjust easily when moved, then stay in place. If your TV is too loose or too tight, adjust the side tension knob T.
NOTE: Once your TV is in place, tighten the side tension knob Tto prevent unwanted movement.
NOTE: Additional tension can be applied using a 3/16 inch hex key (not
supplied).
CAUTION: Avoid potential personal injury or property damage! Locking screw 11 must be installed to secure the TV to the arm assembly 08 .