Arlotto AR3210P User manual

AR3210P/3510P Quick Installation Guide
PACKAGING CONTAINS
2Desiccant sachet and sticker
1Network camera
4Allen key
3Fixing anchors and screws
6Quick installation guide
5Warranty document
8Plastic baseLens
7Drill pattern
SETUP
1Reset button
2System status
3Power on
4Micro SD storage
5Wall fix mount
6Lens release mount
7Silicone gasket
8Cover screw
9Ethernet activity LED
10 Ethernet link LED
CAMERA DESCRIPTION
Top View
1
2
3
5
4
6
7
8
9
10
1Remove carefully network camera cover screws with the Allen key.
2Once the screws are removed take the camera, take the drill
pattern and locate it correctly in the desired area, please align
correctly the lens to the area you would like to monitor.
3You would find the fixation anchors and screws, please fix
correctly the screws at 3 fixation areas. Once the camera is fixed
to the wall or ceiling there is still the chance to adjust better the
camera vision angle.
6You would be able to focus the lens by releasing the cross screw
in the top of the lens, once it is released please turn the lens until
get a sharp image.
4Take the network camera cover and put it upside down, stick at
the cover back the double face tape and then open and stick the
desiccant pouch to it.
5If you would need to change the position of the lens please
release the screws in each side of the lens holder as shown in the
picture.

AR3210P/3510P Quick Installation Guide
SETUP
11 For the 1st time setup, the default user name and pasword are
required to have access to your desire setup. Later on, you may
be change or setup different the user name and password in the
GUI Interface.
Default User Name : admin
Default Password : 123456
10 You will need to close all the browsers and restart it, not the
computer, to apply the changes.When you access the IP cam
over IE Browser, you will see the dialog to have your approval
for ActiveX. Please click “ Allow ” and it will guide you through
to login page.
12 Once access is granted you are ready to change network camara
settings.
14 You are able to access Arlotto network camara user interface
through other browser like Opera Chrome or Firefox, for more
information please check Arlotto Comnet website.
13 Multi-lingual interface are available at the top left scroll down list
in the GUI interface.
HARDWARE LIMITED WARRANTY
What is covered: This warranty covers any hardware defect in materials of workmanship, with the exceptions stated bellow.
How long coverage lasts: This warranty lasts for 2 years from the date of the purchase by the original end-user customer.
What is not covered: This warranty does not cover cosmetic damage or any other damage caused by abuse, misuse, and neglect use in violation of the
instructions, repair by any 3rd. party or an act of God. Aslo if serial number has been altered,defaced or removed, further to this consequential and incidental
damages are not revocable by this warranty. Lenses, hard drives and solid state memory warranty is limited to 1 year.
What Manufacturer will do: Manufacturer will in our sole discretion repair or replace any product that proves in material of workmanship, any repair or
replaced part would be covered by 3 months warranty extension. During the warranty period the manufacturer would cover 1 way of the transportation and
customer the other way. After warranty is expried the transportation cost shall be paid by the customer.
How to get service: Contact your authorized distributor in your region or contact manfacturer directly if there is not distributor in your country. Please check
www.arlotto.com website for more information about RMA and to get support.
Your rights: European Union and some States do not allow exclusion or limitation of consequential or incidental damages, so the above exclusion or
limitation may not be apply to you. This warranty gives you specific legal rights; you may also have other rights which vary from State to State.
7Close the camera cover firmly with the Allen key, now camera
is ready to connect it to the network.
8To be able to access Arlotto IP cam web interface thru IP over
Internet Explorer, please set up the IP camara default leavel
192.168.1.168 as trusted site. For doing this, please visit to IE
“ Internet Options ” and select “ Security ” tag to open “ Trust
sites ” dialog. For specific to include the default IP address to the
trusted ones. Notice, you may need to un-tick “ https verification ”
request. Then apply to save the changes we just did.
9For being able to download Arlotto ActiveX protocol from camera
and have full access to the IP cam over IE Browser. Please visit
the “custom level ” at Security section in the Internet Options.
Please find “ Download signed ActiveX controls ” and “ download
unsigned ActiveX controls” to change the security status from
“ Disable ” to “ Prompt ”. Then apply to save changes.