Armitron prosport M1044 User manual

INSTRUCTIONS MANUAL
FEATURES
SELECTING FEATURES
SETTING THE TIME AND CALENDAR
STOPWATCH
SPLIT TIME
• Time Telling Mode (Hours, Minutes, Seconds, Date and Day of the
Week)
• Calendar Mode (Month, Date, and Day of the Week)
• 24 Hour Alarm and Weekly Alarms
• Hourly Chime: One ‘Beep’ sound every full Hour
• Chronograph Mode: Hours, Minutes, Seconds, and 1/100 of a sec-
ond with Lap Operation
• Countdown Timer
• Second Time Zone
• 12/24 Hour (Military Time)
• Water Resistant as indicated on the watch
• INSTALITE - Electro Luminescent Display
1. Time Telling Mode displays Hours, Minutes, Seconds, Date, and Day of
the Week.
2. From Time Telling Mode, press and hold ‘C’. Calendar Mode appears
and the Month, Date, and Day of the Week are displayed. Release ‘C’ to
return to Time Telling Mode.
3. From Time Telling Mode, press ‘B’ once. Chronograph appears. Press
‘B’ four limes to return to Time Telling Mode.
4. From Time Telling Mode, press ‘B’ twice. Alarm Mode appears. Press ‘B’
three times to return to Time Telling Mode.
5. From Time Telling Mode, press ‘B’ three times. Countdown Timer Mode
appears. Press ‘B’ twice to return to Time Telling Mode.
6. From Time Telling Mode, press ‘B’ four times. Second Time Zone Mode
appears. Press ‘B’ once to return to Time Telling Mode.
1. From Time Telling Mode, press and hold ‘A’. Seconds flash. Press ‘C’ to
zero out the Seconds.
NOTE: Zeroing out 30 or more seconds automatically adds one minute to
time.
2. Press ‘B’. Hours flash. Press ‘C’ to advance the Hour.
NOTE: Pressing and holding ‘C’ will advance digits rapidly. When 12 Hour
Format is selected, ‘PM’ indicates ‘p.m.’ times; there is no indicator for
‘a.m.’ times.
3. Press ‘B’. Minutes flash. Press ‘C’ to advance the Minutes.
4. Press ‘B’. Months flash. Press ‘C’ to advance the Months.
5. Press ‘B’. The Date flashes. Press ‘C’ to advance the Date.
6. Press ‘B’. The Day flashes. Press ‘C’ to advance the Day.
7. Press ‘B’. 12/24 Hour Time Format flashes. Press ‘C’ to select either 12
Hour Time or 24 Hour (Military) Time.
NOTE: ‘12’ indicates 12 Hr Format; ‘24’ indicates 24 Hr (Military Time).
8. Press ‘A’ to end sequence and return to Time Telling Mode.
1. From Time Telling Mode, press ‘B’ once to enter the Stopwatch Mode.
2. Press ‘C’ to start timing.
3. Press ‘C’ again to stop timing.
4. Press ‘A’ to reset to zero.
5. Press ‘B’ to return to Time Telling Mode.
1. While in Stopwatch Mode, press ‘C’ to start timing.
2. Press ‘A’ to measure and display Split Times.
3. Press ‘C’ to stop timing at the end of the event.
4. Press ‘A’ to reveal the final Split Time.
5. Press ‘A’ again to reset to zero.
6. Press ‘B’ to return to Time Telling Mode.
COUNTDOWN TIMER
1. From Time Telling Mode, press ‘B’ three times to enter
the Countdown Timer Mode.
2. Press and hold ‘A’. Hours flash. Press ‘C’ to adjust the Hour.
3. Press ‘B’. Minutes flash. Press ‘C’ to adjust the Minutes.
4. Press ‘B’. Seconds flash. Press ‘C’ to adjust the Seconds.
5. When the Countdown Timer is set, press ‘A’ to end set sequence and
return to Timer Mode.
6. Press ‘C’ to start the Countdown Timer.
7. If desired, press ‘C’ again to stop the Countdown Timer. Press ‘C’ again
to resume the Countdown Timer.
NOTE: The Countdown timing will continue in any mode until
‘C’ is pressed. When the Timer has expired, the alarm will sound for about
10 seconds or until any button is pressed.
8. Press ‘C’ to stop the Timer.
9. Press ‘B’ to return to Time Telling Mode.
SETTING THE 24 HOUR ALARM
1. From Time Telling Mode, press ‘B’ twice to enter the Alarm Mode.
2. Press and hold ‘A’. The Alarm Number (Al-A3) flashes. Press ‘C’ to select
the Alarm Number.
3. Press ‘A’ Alarm Hours flash. Press ‘C’ to advance the Alarm Hour.
NOTE: Pressing and holding ‘C’ will advance digits rapidly.
4. Press ‘A’ Alarm Minutes flash. Press ‘C’ to advance the Alarm Minute.
5. Press ‘A’ Alarm Time Zone flashes. Press ‘C’ to select either Normal
Time Alarm (t1) or Second Time Zone Alarm (t2).
6. Press ‘A’ Alarm frequency flashes. Press ‘C’ to select the Daily (DA) or
Weekly (WE) Alarm.
7. Press ‘A’ to end set sequence.
8. Press ‘B’ to return to Time Telling Mode.
M1044
EL LIGHT FEATURE
1. Press ‘D’ in any mode to illuminate the watch face. The backlight will
remain lit for 2 to 3 seconds.
NOTE: EXCESSIVE USE OF LIGHT WILL SHORTEN BATTERY LIFE.
ACTIVATING ALARM + HOURLY CHIME
1. While in Alarm Mode, press ‘A’ to select the desired Alarm (Al-A3). Press
‘C’ to activate the Alarm. The Alarm Symbol appears to indicate the Alarm
will sound at the preset Alarm Time for about 20 seconds or until any
button is pressed.
2. Press ‘C’ again to deactivate the Alarm.
3. Press ‘A’ to select the Hourly Chime (CH). Press ‘C’ to activate the Hour-
ly Chime. The Hourly Chime Symbol appears to indicate the Hourly Chime
will sound every hour on the hour.
4. Press ‘C’ again to deactivate the Hourly Chime.
5. Press ‘A’ to select the Beep Signal (BP). Press ‘C’ to activate or deacti-
vate the Beep Signal.
6. Press ‘B’ to return to Time Telling Mode.
SECOND TIME ZONE
1. From Time Telling Mode, press ‘B’ four times to enter the
Second Time Zone Mode.
2. Press and hold ‘A’. Hours flash. Press ‘C’ to advance the Hour.
3. Press ‘B’. Minutes flash. Press ‘C’ to advance the Minutes.
4. Press ‘A’ to end set sequence.
5. Press ‘C’ to return to Time Telling Mode.
NOTE: The Second Time Zone (Second Time Zone) Clock may be used to
keep track of a foreign time.

WATER RESISTANCE
RETURN YOUR WATCH FOR SERVICING
USE OUR NATIONWIDE SERVICE CENTERS. YOU
CANNOT RETURN WATCH FOR SERVICE WHERE
IT WAS PURCHASED.
This is a WATER RESISTANT watch. Do not operate push buttons below
the surface of the water. Should water or condensation appear in the
watch, immediately have the watch checked. Water can corrode electron-
ic parts inside the case. Please call [phone] for a listing of all approved and authorized
service centers and locations, or visit our website at:
WWW.ARMITRON.COM
YOUR WATCH SHOULD NOT BE RETURNED TO THE PLACE OF
PURCHASE. Carefully pack your watch in a sturdy box (do not send in a
gift box for same will not be returned) and mail to the nearest approved
authorized service station. Because of possible loss, we recommend that
you insure the watch, return receipt requested, when using the mail. If you
do not receive a receipt within a reasonable time, start a tracer through
the originating post office. Never include a special watch band or any
other article of personal value in your shipment.
If your watch requires cleaning, lubrication, battery changing, or needs
a crystal replaced, Armitron Adventure approved Service Centers are
available in your area. These repair facilities use Armitron Adventure parts
and components to assure quality and future performance. Free estimates
are available in advance, should you need servicing or repairs not covered
under the warranty. Repairs covered under the warranty may require proof
of purchase, so retain the purchase receipt.
INSTRUCTIONS MANUAL
CHANGING THE BATTERY
Change the battery when the watch becomes slow, the readout darkens or
does not appear, or the backlight fails. Before removing the old battery, be
sure to denote its polarity so that the new battery is installed in exactly the
same way. Replace with the same kind or equivalent only. This watch
contains precise electronic components and should only be opened by
a qualified watch technician. However, it is not necessary to return your
watch to the manufacturer for battery replacement. It is recommended that
you bring your timepiece to a local jeweler.
M1044