ARPEGE SECURITY AS280 B User manual

Maintenance Manual AS280 B

Preface
Thank you for choosing our multi-currency discriminator, which with 5 counting
modes(COUNT, FACE, ORIENT, SINGLE, MIX). The user can choose the setting according
to their requirement, which can improve the working efficiency. When need to repair the
machine, please refer to this maintenance manual.

Content
1. Specification..........................................................................................................................................1
2. The introduction of the main parts..........................................................................................................2
3. Explosive view and Spare Parts introduction.........................................................................................3
4. Working principle.................................................................................................................................4-5
5. The introduction of the main board.........................................................................................................6
6.Counting Faults and resolutions............................................................................................................6-7
7. Common faults and the eliminating methods......................................................................................9-13
8. CIS calibration.....................................................................................................................................13

9. Return to the factory setting..................................................................................................................14
10.Alarm beep setting................................................................................................... .................... 14.15

1
1. Specification
1.1 Voltage ：100～240VAC
1.2 Frequency：50/60Hz
1.3 Rated consumption：80W（Max）
1.4 Batch range：1～200pcs
1.5 Counting speed：800, 1000, 1200pcs/min
1.6 Hopper capacity：500pcs（Max）
1.7 Stacker capacity：200pcs（Max）
1.8 Working noise：＜80dB
1.9 Working temperature：0～40℃

2
2．The introduction of the main parts
1.Display screen
1.Hopper guide
2.Rejection
pocket
3.
Banknote
receiving wheel
2
.Keys
4
.Reset sensor-
emitting
5. Stacker board
3.Banknote
receiving wheel

3
1
.Printer
1.Rear cover
2.Adjusting screw
2.SD card slot
3.Start sensor
3.USB port

4
4
.Banknote
twiddling wheel
4. External display port
5
.Hopper
assembly
5. Power switch
6.Power socket

5
3. Explosive view and Spare Parts introduction
Explosive view
NO.
NAME
NO.
Name
NO.
NAME
NO.
NAME