array K K-WALL2 User manual

K-WALL2L Ver. 2.1
K-WALL2
USER GUIDE
English

K-WALL2L Ver. 2.1
2
TABLE OF CONTENTS
1. K-WALL2
1.1 Packaging....................................................................................................................3
1.2 Safety Precautions......................................................................................................3
2. PSYSICAL........................................................................................................... .4
3. INTRODUCTION.................. ................................................................................ .6
4. ASSEMBLY ...................................................................................................... .6
4.1 Configuration Assemby..................................................................................................6
5. WALL GUIDE TEMPLATE.......................................................................................... .9
6.DECLARATION OF CONFORMITY.......................................................................................10

K-WALL2L Ver. 2.1
3
1.1 PACKAGING
Please verify the shipment for completeness and proper condition of the items.
ID Description Q.ty
1Wall Bracket 1
2Speaker Bracket 1
3Support 2
4Rotation Pivot 1
5M5 x 12 Botton Head Hex Socket
Screw 6
6M5 x 14 Botton Head Hex Socket
Screw 2
7M8 x 35 Gub Screw 2
1.2 SAFETY PRECAUTIONS
Installation and setup should only be carried out by qualified personal.
It is the responibility of the person installing the assembly to ensure that the suspension/fixing points
are suitable for the intended use.
Always carry out a visual and funcional inspection of the items before use. In case there is any doubt
as to the proper functioning and safety of the items, these must be withdrawn from use immediately.
Only use mounting parts (fixing anchors and screws) that are suitable for the intended application.
Before mounting the K-WALL2L on any K-array speaker, please read carefully the speaker’s User
Guide for checking the fixing points and the available configurations.

5in
127mm
6in
140mm
6in
140mm
0in
9mm
5in
121,8mm
1in
16mm
4in
100mm
1in
22mm
1in
32mm
K-WALL2L Ver. 2.1
4
2. PSYSICAL
Weight: 0,6 kg (1,3 lb)

2in
40mm
9in
227mm
K-WALL2L Ver. 2.1
5

NOTE: The KK52 Speaker shown in these pages is use for illustrative purposes. Please
refer to your speaker’s user guide for checking the fixing points and the available
configurations.
K-WALL2L Ver. 2.1
6
3. INTRODUCTION
K-WALL2 are speccifically used for wall installations of K-array speakers, wich can be set in 3d
direction (please check the speaker positions in the user manual).
4.1 CONFIGURATION ASSEMBLY
In the packaging box you will find speakerbraket and wall bracketsparated af picture below.
Wall Bracket
Speaker Bracket
4. ASSEMBLY

K-WALL2L Ver. 2.1
7
1. Assembly speaker braked to K-array speaker make sure screw are tighened correctly as picture
below.e K-array.

K-WALL2L Ver. 2.1
8
1. Position the device as required by user, always check configurations in user manual.
2. Fix wall bracket and then insert speaker bracket.

WARNING
Before Installation, check configuration in the speaker manual on
website www.K-array.com
K-WALL2L Ver. 2.1
9

K-WALL2L Ver. 2.1
10
5. WALL GUIDE
TEMPLATE