Art 311 User manual

Applied Research & Technology •215 Tremont St., Rochester, NY 14608 •USA •585.436.2720 tel •585.436.3942 fax •www.artproaudio.com
Features and specifications subject to change without notice. ©2002Applied Research and Technology ART-311-Specs-0902
From the innovative minds at ART.
From the innovative minds at ART.
311
The Model 311 Crossover may be used as a
stereo 2–way crossover network, and has the
addition of a subwoofer output for low-end
frequency reinforcement. It employs 24dB/
octave state-variable, fourth-order, Linkwitz-
Riley filters that guarantee properly phased
outputs at all frequencies, which is mandatory
for the proper acoustic summing of common
signals from adjacent drivers in the crossover
region.
Each channel features independent high and
low output level controls and a crossover
frequency rotary control, which covers a wide
range (250hz to 6khz). All three outputs have
a 30 cycle low cut switch to eliminate low-end
rumble. The subwoofer features an independent
output level & rotary control for frequencies in
the 50hz to 250hz range.
311 FEATURES:
✔Stereo 2–Way Crossover
✔Low–End, Subwoofer
Output
✔Linkwitz–Riley filters
✔Independent high
and low output level
controls
✔Phase Switches
✔XLR and 1/4” Input
Connectors
✔1/4” Output Connections
APPLICATIONS:
✔Live Sound Systems/PA
✔Permanent Installations
✔Church, Club, Practice
PA systems
✔Bi-Amped Bass and
Keyboard Rigs
STEREO 2-WAY CROSSOVER w/ SUBWOOFER OUT
Dimensions: 5.5”d x 19.0”w x 1.75”h
Weight: 4.85 lbs. (2.2 kg)
Input Connections: XLR, 1/4” TRS, balanced
Output Connections: 1/4” TS, unbalanced
Input Impedance: 100K Ohms
Output Impedance: 220 Ohms
Maximum Input Level: +21dBu
Maximum Output Level: +21dBu
CMRR >75dB (typical @ 1kHz)
Frequency Response: 10Hz to 40kHz, +/–.5dB
Signal to Noise Ratio: >95dB, Ref: 0dBu
20Hz to 20kHz, unweighted
Dynamic Range: >114dB
Total Harmonic Distortion (THD): <0.01% (20Hz-20kHz, 0dBu)
Crossover Filter Type: Fourth-order Linkwitz-Riley
24dB/octave, state-variable
Crossover Frequency Range: 250Hz to 6kHz
Subwoofer Filter Type: Two-pole Butterworth, 12dB/octave
Subwoofer Frequency Range: 50Hz to 250Hz
Power Requirements: USA: 110 –125V AC / 50-60hz / 15W
Export units configured for country
of destination