Articona 386428 User manual

Articona International BV
Withuisveld 30
6226 NV Maastricht
Netherlands
[email protected]
5 /8 Port way
Fast Ethernet Switch
Quick Installation Guide
FCC Warning
This device has been tested and
found to comply with limits for a Class
B digital device, pursuant to Part 2 and
15 of FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference
when the equipment is operated in a
commercial environment. This
equipment generates and radiates
radio frequency energy and, if not
installed and used in accordance with
the user’s manual, it may cause
interference in which case users will
be required to correct interference at
their own expenses.
CE Warning
This is a Class B product. In a
domestic environment, this product
may cause radio interference in which
case the user may be required to take
adequate measures.
Introduction
This switch provides 5/8 10/100M
ports. It was designed for easy
installation and high performance in
an environment where traffic is on the
network and the number of users
increases continuously.
The small compact palm size was
specifically designed for small to
medium workgroups. It can be
installed where space is limited;
moreover, it provides smooth network
migration and easy upgrade to
network capacity.
Package Contents
Before you start to install this switch,
please verify your package that
contains the following items:
⚫One Fast Ethernet Switch
⚫One Power Adapter
⚫One Quick Installation Guide
Note: If any of these items is found
missing or damaged, please contact

your local supplier for replacement.
Key Features
⚫5/8 Port 10/100M Nway
( Auto-negotiation ) Switch
⚫Palm size with metal case
⚫Auto-learn of networking configurations
⚫Auto-detect full/half-duplex modes for
any port
⚫Dedicated full-duplex 200Mbps
bandwidth
⚫Store-and-Forward switching methods
⚫IEEE 802.3x flow control for full-duplex
and back-pressure flow control for
half-duplex
⚫Non-blocking & Non-head-of-line
blocking full wire speed forwarding
⚫Auto-MDI/MDI-X function for any port
⚫Smart plug & play
Power
Power is supplied through an external
DC power adapter.
Front Panel (LEDs)
LED Indicators of 5 Port 10/100M
Switch
LED
Status
Operation
Power
On
Power is on.
Off
Power is off.
LINK/ACT
On
Port is for connection
Off
No connection.
Flashing
Data is transmitting or
receiving.
5 Port Switch
8 Port Switch
Rear Panel (Connections)
This switch provides automatic
crossover detection functionality for
any port. It is simple and friendly to
up-link to another switch without
crossover cable.
Technical Specifications
Standards
IEEE 802.3 10BaseT
IEEE 802.3u
100BaseTX
IEEE 802.3x Flow
control
Features
Number of Ports: 5/8
MAC Address: 2/ 1K
Buffer Memory:
512/768K bits
Transmission
Method: Store and
Forward
Filtering/Forwa
rding Rates
100Mbps port –
148,800pps
10Mbps –14,880pps
Transmission
Media
10BaseT Cat. 3, 4, 5
UTP/STP
100BaseTX Cat. 5
UTP/STP
LED Indicators
Per Port: LINK/ACT
Per Unit: Power
Power Supply
DC 5V
Power
Consumption
6 Watts (Max)
Dimensions
130 x 77 x 24 mm
(L x W x H)
Weight
0.28 kg (5p)
0.35 kg (8p)
Operating
Temperature
0 to 45℃
Storage
Temperature
-20 to 90℃
Humidity
10 to 90% RH
(non-condensing)
Certifications
FCC Class B, CE