Articona 567889 User manual

Articona International BV
Withuisveld 30
6226 NV Maastricht
Netherlands
[e-mail]
8 Port Gigabit Ethernet Switch
Quick Installation Guide
FCC Warning
This device has been tested and found to
comply with limits for a Class B digital
device, pursuant to Part 2 and 15 of FCC
Rules. These limits are designed to
provide reasonable protection against
harmful interference when the equipment is
operated in a commercial environment.
This equipment generates and radiates
radio frequency energy and, if not installed
and used in accordance with the user’s
manual, it may cause interference in which
case users will be required to correct
interference at their own expenses.
CE Warning
This is a Class B product. In a domestic
environment, this product may cause radio
interference in which case the user may be
required to take adequate measures.
Introduction
This switch provides 8 10/100/1000M ports.
It was designed for easy installation and
high performance in an environment where
traffic is on the network and the number of
users increases continuously.
The small compact palm size was
specifically designed for small to medium
workgroups. It can be installed where space
is limited; moreover, it provides smooth
network migration and easy upgrade to
network capacity.
Package Contents
Before you start to install this switch, please
verify your package that contains the
following items:
⚫One Gigabit Ethernet Switch
⚫One Power Adapter
⚫One Quick Installation Guide
Note: If any of these items is found missing
or damaged, please contact your local
supplier for replacement.
Key Features
⚫8 Port 10/100/1000M Nway
(Auto-negotiation) Switch
⚫Palm size with metal case
⚫Auto-learn of networking configurations
⚫Auto-detect full/half-duplex modes for
any port
⚫Dedicated full-duplex 2000Mbps
bandwidth
⚫Store-and-Forward switching methods
⚫IEEE 802.3x flow control for full-duplex
and back-pressure flow control for
half-duplex
⚫Non-blocking & Non-head-of-line blocking
full wire speed forwarding
⚫Auto-MDI/MDI-X function for any port
⚫Smart plug & play
Power
Power is supplied through an external DC
power adapter.
Front Panel (LEDs)
LED Indicators of 8 Port 10/100/1000M
Switch
LED
Status
Operation
Power
On
Power is on.
Off
Power is off.
LINK/ACT
On
Port is for connection
Off
No connection.
Flashing
Data is transmitting or
receiving.
1000M
On
Port is on 1000M status
Off
Port is on 10/100M
status.
Rear Panel (Connections)
Switch/Hub to this 8 Port Gigabit
Ethernet Switch
This switch provides automatic crossover
detection functionality for any port. It is
simple and friendly to up-link to another
switch without crossover cable.

PC/Other devices to this 8 Port Gigabit
Ethernet Switch
Via a twisted pair cable straight through, this
switch can be connected to PCs, servers
and other network devices.
Technical Specifications
Standards
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3ab 1000BaseT
IEEE 802.3x Flow control
Features
Number of Ports: 8
MAC Address: 4K
Buffer Memory: 128 KB
Jumbo Frames: 9KB
Transmission Method: Store
and Forward
Filtering/
Forwarding
Rates
1000Mbps port –1,488,000pps
100Mbps port –148,800pps
10Mbps –14,880pps
Transmission
Media
10BaseT Cat. 3, 4, 5
UTP/STP
100BaseTX Cat. 5 UTP/STP
1000BaseT Cat. 5E UTP/STP
LED Indicators
Per Port: LINK/ACT, 1000M
Per Unit: Power
Power Supply
DC 5V
Power
Consumption
9 Watts (Max)
Dimensions
130 x 97 x 24 mm (L x W x H)
Weight
0.35 kg
Operating
Temperature
0 to 45℃
Storage
Temperature
-20 to 90℃
Humidity
10 to 90% RH
(non-condensing)
Certifications
FCC Class B, CE