ARTISUL D22 User manual

User Manual for Mac
D22
Mac OS X 10.8.5 or later
Driver Version 3.05 and later
Ver.3.05 Release
Date: 5/22/18

Artisul D22
Driver Version 3.62
!
1!
Apple and Mac OS are either registered trademarks or trademarks of Apple Corporation in United
States and/or other countries. Any additional company and product name mentioned in this
documentation may be registered trademarks or trademarks.
ARTISUL and UC-Logic are registered trademarks of UC-Logic Technology Corp.
UC-Logic reserves the right to revise this publication without obligation to provide notification of
such changes.
Copyright© 2016-2018 UC-Logic Technology Corp. All rights reserved.

Artisul D22
Driver Version 3.62
!
2!
CONTENTS
I. General Information
•Overview
•ARTISUL Functions
•System Requirements
•Verifying Hardware
•External Buttons
•Setup
•Installation on Mac
•Usage Tips
•Mapping to Multiple Monitors
II. ARTISUL Driver Configuration
•Dashboard
•Devices
•Hot Keys
•Scroll Dial
•Pen
•Calibration
•Support
•Save & Backup
III. Setting up Pen and Changing the Pen Tip
IV. How to Care for your ARTISUL
V. Frequently Asked Questions
APPENDIX
Appendix 1: On-Screen Display (OSD) Control
Appendix 2: Troubleshooting & Solutions
Appendix 3: Uninstalling the ARTISUL Driver
Appendix 4: Hot Key Comparison Table
3
3
3
3
4
5
6
8
9
9
11
12
12
13
13
15
15
16
17
18
19
20
22
23
24

Artisul D22
Driver Version 3.62
!
3!
I. General Information
OVERVIEW
Welcome to the ARTISUL Family! Discover how simple and innovative it is to control your computer using
our Pen and LCD Pen Display in place of your mouse or track pad.
The Gaudi Pen functions very similar to an art pen, being able to draw a line very thin or thick, light or dark.
This is also known as pressure sensitivity. You can write, sign, annotate documents, draw, sketch,or paint
as easily as you would on normal paper. Simulate the functions of a pencil, mark pen, brush, or watercolor
pen by using graphics apps and software such as Adobe® Photoshop™, Corel® Painter™, Clip Studio
Paint™, Toon Boom, and more!
ARTISUL FUNCTIONS
After installing the device driver, your ARTISUL Pen Display has the following functions:
•Direct Pointing – You can move the cursor to any location by hovering the Pen tip over your
ARTISUL display.
•Three-button Mouse Commands - Your ARTISUL Pen Display provides all the functions of a three-
button mouse by using its pen tip and two buttons.
•QuickDial –You can scroll through documents and Web pages by pressing the middle button ofthe
QuickDial over your ARTISUL display.
•Pressure sensitivity – This feature allows you to emulate various brushes and pencils by pressing
the Pen down on the ARTISUL display.
CAUTION: The Gaudi Pen have sensitive electronic components inside, which can be damaged when
dropped or mishandled. Store the Gaudi Pen in a safe and secure place when not in use.
SYSTEM REQUIREMENTS
Mac 10.8.5 or later
USB port and HDMI port
Driver Installation Requirements
Internet connection

Artisul D22
Driver Version 3.62
!
4!
VERIFYING HARDWARE
Your ARTISUL Pen Display and its packagedcontents are shown below. If anything is missing, contact
your dealer immediately.
D22

Artisul D22
Driver Version 3.62
!
5!
External Buttons
Located on the backside of the D22 are 5 external display buttons.

Artisul D22
Driver Version 3.62
!
6!
SETUP
Note: Please remove power adapter first when removing your ARTISUL D22 from your computer.
Note: Use only power adaptersand cables approved by UC-LOGIC for use with ARTISUL.
Stand Setup
Before using, always securely place and test your Artisul D22 on a stable desk or table, as show below.
After every usage, place the D22 back in this position.

Artisul D22
Driver Version 3.62
!
7!
Positioning the Stand
The Built-In Stand can be positioned for optimal working and viewing angles. The ridges on the back of the
D22 allow it to also be positioned at the edge of desks for detailed work.
VESA Arm Mount Compatible:The Artisul D22 can be used with a VESA arm mount. Please use caution
when installing a VESA arm to the D22.

Artisul D22
Driver Version 3.62
!
8!
INSTALLATION ON MAC
1. Download the latest driver from https://artisul.com/downloads/.
2. Go to Downloads at the top right-hand corner, or your Downloads folder in Finder.
3. Selectthe ArtisulTabletDriver package (decompress if needed) and follow the installation
instructions shown on screen.
4. After installation has completed, the Driver application will be called ARTISULSetting. For quick
access, keep the application in your Dock.
NOTE: If you are unable to access anything in ARTISULSetting, please restart your computer and open
ARTISULSetting again.

Artisul D22
Driver Version 3.62
!
9!
USAGE TIPS
Double Tapping
•To double tap with the U Pen (equivalent to a double click with a mouse),] quickly lift the pen tip up
away from the ARTISUL display before returning for the second tap.
Scrolling Function of Digital Pen
•To scroll on a page, press the first button on the Monet Pen (same function as the mouse middle
button) over the ARTISUL display.
•If you have customized your Monet Pen, you must reset the button to Middle Button in the
ARTISUL driver Pen settings in order to use this function.
Traditional Mouse Setup
You can have both the ARTISUL Pen Display and a traditional mouse setup to your computer at the same
time. However, only one device is able to actively work at a time. You cannot use the mouse and Monet
Pen at the same time.
MONITOR MAPPING
How to Change to Extended Display
Extended Display means you work with a larger desktop area spanning your computer monitor and your
Artisul LCD Display. Applications can be moved from one display to the other, and will allow you to work in
different screen resolutions.
1. Go to System Preferences and select Displays.
2. Withthe Artisul LCD Display connected, in Displays go to Arrangement.Here you can rearrange
how displays are mapped to each other.

Artisul D22
Driver Version 3.62
!
10!
How to Change to Mirror Display
3. In Arrangement, at the bottom left-hand of the window, select Mirror Displays if you want your main
computer monitor and your Artisul LCD Display to show the same image.

Artisul D22
Driver Version 3.62
!
11!
II. Artisul Display Configuration
You may configure your ARTISUL Pen Display by modifying the functions of the pen tip, the two side
buttons, andthe FastAccess Buttons.
•Go to the ARTISULSetting Application.
Driver Settings
The Artisul Control Panel is divided into 7 tabs:
•Dashboard
•Devices
•HotKeys
•Pen
•Calibration
•Support
•Save & Backup
Dashboard
The Dashboard tab can help you connect to the ARTISUL website. Click Home to go to our website.

Artisul D22
Driver Version 3.62
!
12!
Devices
The Devices tab shows the device currently in use and the driver version being run.
•Note: If nothing is shown in Device Information, make sure your ARTISUL pen display is properly
connected to your computer. Unplug and re-plug if problem still persists. If the issue still persists,
restart your computer.
HotKeys
Customize the FastAccess buttons and QuickDial from the HotKeys tab.
•Redefine HotKey: Click on the title of the button. A dropdown menu will appear with a list of tool
options. Choose the one you want to use.
•Custom Define: At the bottom of the dropdown menu, choose Custom. This will allow you to input
a custom keyboard shortcut.
•Hot Keys Side: Select whether you want the Hot Keys on the right side or left side. This will flip the
screen for optimal pen usage.

Artisul D22
Driver Version 3.62
!
13!
•Note: Software keystrokes are based on English input methods. If not already, set to English when
using HotKeys on your Artisul pen display.
•Note: Most creative software will not accept keystroke inputs when your digital pen is still in use or
when your pen is still within the detectable cursor range. To avoid invalid keystroke actions, hold
the pen away from the screen before pressing your FastAccess button. (Hold U-Pen at least 1.5”
away from the surface of the screen.)
Scroll Dial
You can define 5 functions tothe QuickDial. Tap on Scroll Dial button to select the function you would like
to use.
oTo switch between functions, press down on the edge ofthe QuickDial. You will see the function
name briefly at the bottom of the screen when switched.
Pen
oPen Setting
oPen Button Settings: Customize the functions of the two side buttons on the U-Pen. Click the
button name and choose a function from the dropdown menu.

Artisul D22
Driver Version 3.62
!
14!
oDouble Click Speed: Move the slider toward “Slow” if you want more time in-between double
tapping the pen tip. Move the slider toward “Fast” if you want less time in-between double
tapping the pen tip.
oPen Pressure Setting: Move the slider in the sensitivity bar to adjust pen pressure response.
Light means your ARTISUL pen display will recognize the slightest nuance of pressure, while
heavy means it will take more pressure for the pen tip to register.
oLeft Hand/Right Hand: If you’re left-handed, choose Left Hand. If you’re right handed, choose
Right Hand.
oReset to Default: Return all Pen Settings to default by tapping Reset to Default.
oPen Pressure: Using the digital pen, press down in the white rectangle. Use different levels of
pressure to test if pen pressure sensitivity is working on your computer.

Artisul D22
Driver Version 3.62
!
15!
Calibration
•Calibration: Click “Set my own Calibration” to activate the calibration screen. Press the crosses that
appear on the screen with the digital pen to calibrate the screen.
Support
•Tech Support: Connect to our online community support forum.
•Tutorials: Helpful guides to setting up your ARTISUL pen display.
•Warranty Registration: Link to our product registration webpage.

Artisul D22
Driver Version 3.62
!
16!
Save & Backup
•Save As: Name and save your HotKey settings. Beneficial when using many apps & software with
different hotkeys preferences.
•Preference Setting: Choose between previously saved HotKey settings.

Artisul D22
Driver Version 3.62
!
17!
III. Setting up your Gaudi Pen and Changing the Pen Tip
Setting up Your Gaudi Battery Pen
1. Twist off the top half of the pen.
2. Insert AAA alkaline dry battery with “-” side facing into the main body. (Battery is not included)
3. Twist the top half of the pen back on.
Note: When the residual battery capacity is not enough, the center of the side button will light up blue. This
means you must change the battery.
Changing Pen Tips
1. You will need the pen nib removal tool.
2. For D22, use the pen nib removal tool to pull out the pen nib.
3. Place new pen nib into the Gaudi Pen.
4. Push the Gaudi Pen down on a hard surface to fully secure the new pen nib in place.
D22

Artisul D22
Driver Version 3.62
!
18!
IV. Taking care of your ARTISUL Pen Display
1. Keep the Gaudi Pen and the ARTISUL LCD screen surface clean. Dust and dirt particles can stick
to the pen and cause excessive wear to the screen protector.
a. Wipe the LCD screen gently with a soft cloth.
b. Stubborn stains may be removed with a screen-cleaning cloth.
2. Keep cables neat and orderly. Overly bending the cables at the ends may cause damage to the
wires inside.
3. Keep the Gaudi Pen in a safe place when not in use. A damaged pen may have adverse effects on
pressure sensitivity.
Note:
1. Unplug all ARTISUL cablesbefore you begin cleaning your ARTISUL.
2. Never spray water or detergent directly on your ARTISUL. It may cause damage.
3. Never use strong solvent such as a thinner or alcohol for cleaning.
4. Never reverse or compress the ARTISUL cables and don’t bend it over 90∘. It may cause
damage to the cables.

Artisul D22
Driver Version 3.62
!
19!
V. Frequently Asked Questions
Q: How can I download the latest driver software?
A: You can download new driversfrom our website (www.artisul.com/downloads/).
Q: My ARTISUL screen is not turning on. What can I do?
A: Follow these steps below:
A. Remove the USB and HDMI cables from your computer.
B. Uninstall the ARTISUL driver from your system.
C. Re-connect your ARTISUL USB and HDMI cables to your computer.
a. If you see the ARTISUL logo appear briefly but the screen goes dark, there is an HDMI
connection issue. Please try using a different HDMI port on your computer, or checking your
computer settings to make sure the HDMI port supports display output.
b. If you do not see the ARTISUL logo appear, there is a USB power connection issue. Please
try connecting the USB to a different port on your computer.
c. If your desktop screensaver is black or a dark color, please try switching from Extended
Display to Duplicate Display in your computer’s display settings.
d. If the issue is still not resolved, please contact ARTISUL Support:
[email protected]
Q: Pen will not work after driver is installed. How do I fix this?
A: Follow these steps below:
A. Refer to the ARTISUL user manual for how to install hardware. Disconnect your ARTISUL tablet
from your computer and follow the hardware installation process again.
B. Connect the ARTISUL to another USB port, preferably one directly connected to the motherboard.
C. Remove any other USB devices connected to your computer
D. Uninstall the ARTISUL driver from your computer and restart your computer. Test the ARTISUL
tablet and pen to see if it works without the driver installed.
E. Please download and install the latest ARTISUL driver (www.artisul.com/downloads/).
F. Check if your tablet and pen will work with the latest driver after restarting your computer.
G. If the above steps do not work, test on another computer. If your ARTISUL works on another
computer, the issue may be other drivers or software on the original computer. Contact your
computer manufacturer for additional troubleshooting.