
PARTS LIST
Item art Number Quantity
1Stainless Steel Tray AA-50 1
2Molded Tray Support 460104 1
3Mounting Block 460692-08 1
4Thumbscrews 510372 2
5Telescoping Tripod Stand 730252-08 1
6Center Column Adjustment --------- 1
7Thumbscrew --------- 1
Not Shown Storage ouch, Tray 460796 1
Not Shown Storage ouch, Tripod Stand 460797 1
age 4
SET-UP:
1. Remove tray & stand from carrying cases. Unfold tripod legs, slide to
the base of the center column, and secure with thumbscrew. Set on
floor.
2. Line-up mounting holes on the far end of the molded tray support with
the mounting block and thumbscrews on the telescoping center
column. Tighten thumb-screws to secure molded tray support to
center column.
3. lace stainless steel tray on top of molded tray support. Turn
telescoping center column adjustment counterclockwise to loosen, set
column to desired height, then turn clockwise to secure.