ASROCK P55 DELUXE - V1.1 User manual

11
11
1
P55 Deluxe
User Manual
Version 1.1
Published August 2009
Copyright©2009 ASRock INC. All rights reserved.

22
22
2
Copyright Notice:Copyright Notice:
Copyright Notice:Copyright Notice:
Copyright Notice:
No part of this manual may be reproduced, transcribed, transmitted, or translated in
any language, in any form or by any means, except duplication of documentation by
the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this manual may or may not be regis-
tered trademarks or copyrights of their respective companies, and are used only for
identification or explanation and to the owners’ benefit, without intent to infringe.
Disclaimer:Disclaimer:
Disclaimer:Disclaimer:
Disclaimer:
Specifications and information contained in this manual are furnished for informa-
tional use only and subject to change without notice, and should not be constructed
as a commitment by ASRock. ASRock assumes no responsibility for any errors or
omissions that may appear in this manual.
With respect to the contents of this manual, ASRock does not provide warranty of
any kind, either expressed or implied, including but not limited to the implied warran-
ties or conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the manual or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic
substance controlled in Perchlorate Best Management Practices (BMP) regulations
passed by the California Legislature. When you discard the Lithium battery in
California, USA, please follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate”
ASRock Website: http://www.asrock.com

33
33
3
ContentsContents
ContentsContents
Contents
1 Introduction1 Introduction
1 Introduction1 Introduction
1 Introduction ......................................................................................................
......................................................................................................
................................................... 55
55
5
1.1 Package Contents .......................................................... 5
1.2 Specifications ................................................................. 6
1.3 Two SLITM Graphics Card Support List .......................... 10
1.4 Two CrossFireXTM Graphics Card Support List ............ 11
1.5 Three CrossFireXTM Graphics Card Support List .......... 11
1.6 Motherboard Layout ...................................................... 12
1.7 I/O Panel ......................................................................... 13
2 Installation2 Installation
2 Installation2 Installation
2 Installation..........................................................................................................
..........................................................................................................
..................................................... 1414
1414
14
2.1 Screw Holes ................................................................... 14
2.2 Pre-installation Precautions ............................................ 14
2.3 CPU Installation .............................................................. 15
2.4 Installation of Heatsink and CPU fan ............................... 17
2.5 Installation of Memory Modules (DIMM) ......................... 18
2.6 Expansion Slots (PCI and PCI Express Slots) ..................... 20
2.7 SLITM and Quad SLITM Operation Guide .......................... 21
2.8 CrossFireXTM, 3-Way CrossFireXTM and Quad
CrossFireXTM Operation Guide ...................................... 25
2.9 Surround Display Feature ............................................. 30
2.10 Jumpers Setup .............................................................. 30
2.11 Onboard Headers and Connectors ............................... 31
2.12 Smart Switches ............................................................. 37
2.13 Dr. Debug ...................................................................... 38
2.14 HDMI_SPDIF Header Connection Guide ......................... 41
2.15 SATAII Hard Disk Setup Guide ....................................... 42
2.16 Serial ATA (SATA) / Serial ATAII (SATAII) Hard Disks
Installation ...................................................................... 43
2.17 Hot Plug and Hot Swap Functions for SATA / SATAII
HDDs ............................................................................ 44
2.18 SATA / SATAII HDD Hot Plug Feature and Operation
Guide .............................................................................. 45
2.19 Driver Installation Guide ................................................. 47
2.20 Installing Windows®XP / XP 64-bit / VistaTM / VistaTM
64-bit With RAID Functions ............................................ 47
2.20.1 Installing Windows®XP / XP 64-bit With RAID
Functions ............................................................ 47
2.20.2 Setting Up a “RAID Ready” System ................... 48
2.20.3 Migrating a “RAID Ready” System to RAID 0,
RAID 1 or RAID 5 ................................................. 49

44
44
4
2.20.4 Installing Windows®VistaTM / VistaTM 64-bit With
RAID Functions ................................................... 50
2.21 Installing Windows®XP / XP 64-bit / VistaTM / VistaTM 64-bit
Without RAID Functions ................................................. 51
2.21.1 Installing Windows®XP / XP 64-bit Without RAID
Functions ........................................................... 51
2.21.2 Installing Windows®VistaTM / VistaTM 64-bit Without
RAID Functions .................................................. 52
2.22 DTS Operation Guide ..................................................... 53
2.23 Untied Overclocking Technology ................................... 55
3 BIOS S3 BIOS S
3 BIOS S3 BIOS S
3 BIOS SETUP UTILITYETUP UTILITY
ETUP UTILITYETUP UTILITY
ETUP UTILITY......................................................................................
......................................................................................
........................................... 5656
5656
56
3.1 Introduction .................................................................... 56
3.1.1 BIOS Menu Bar .................................................... 56
3.1.2 Navigation Keys ................................................... 57
3.2 Main Screen ................................................................... 57
3.3 OC Tweaker Screen ...................................................... 58
3.4 Advanced Screen ......................................................... 61
3.4.1 CPU Configuration ................................................ 62
3.4.2 Chipset Configuration .......................................... 64
3.4.3 ACPI Configuration ............................................... 65
3.4.4 IDE Configuration ................................................. 66
3.4.5 PCIPnP Configuration ........................................... 68
3.4.6 Floppy Configuration ........................................... 69
3.4.7 Super IO Configuration ........................................ 69
3.4.8 USB Configuration ............................................... 70
3.5 Hardware Health Event Monitoring Screen .................. 71
3.6 Boot Screen................................................................... 72
3.6.1 Boot Settings Configuration .................................. 72
3.7 Security Screen ............................................................ 73
3.8 Exit Screen .................................................................... 74
4 Software Support4 Software Support
4 Software Support4 Software Support
4 Software Support ......................................................................................
......................................................................................
........................................... 7575
7575
75
4.1 Install Operating System ............................................... 75
4.2 Support CD Information ................................................. 75
4.2.1 Running Support CD ............................................ 75
4.2.2 Drivers Menu ........................................................ 75
4.2.3 Utilities Menu ........................................................ 75
4.2.4 Contact Information .............................................. 75

55
55
5
Chapter 1: IntroductionChapter 1: Introduction
Chapter 1: IntroductionChapter 1: Introduction
Chapter 1: Introduction
Thank you for purchasing ASRock P55 Deluxe motherboard, a reliable motherboard
produced under ASRock’s consistently stringent quality control. It delivers excellent
performance with robust design conforming to ASRock’s commitment to quality and
endurance.
In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by-step
guide to the hardware installation. Chapter 3 and 4 contain the configuration guide to
BIOS setup and information of the Support CD.
Because the motherboard specifications and the BIOS software might
be updated, the content of this manual will be subject to change without
notice. In case any modifications of this manual occur, the updated
version will be available on ASRock website without further notice. You
may find the latest VGA cards and CPU support lists on ASRock website
as well. ASRock website http://www.asrock.com
If you require technical support related to this motherboard, please visit
our website for specific information about the model you are using.
www.asrock.com/support/index.asp
1.1 P1.1 P
1.1 P1.1 P
1.1 Packack
ackack
ackage Contentsage Contents
age Contentsage Contents
age Contents
ASRock P55 Deluxe Motherboard
(ATX Form Factor: 12.0-in x 9.6-in, 30.5 cm x 24.4 cm)
ASRock P55 Deluxe Quick Installation Guide
ASRock P55 Deluxe Support CD
1 x 80-conductor Ultra ATA 66/100/133 IDE Ribbon Cable
1 x Ribbon Cable for a 3.5-in Floppy Drive
4 x Serial ATA (SATA) Data Cables (Optional)
2 x Serial ATA (SATA) HDD Power Cables (Optional)
1 x I/O Panel Shield
1 x ASRock SLI_Bridge_2S Card

66
66
6
1.21.2
1.21.2
1.2 SpecificationsSpecifications
SpecificationsSpecifications
Specifications
Platform - ATX Form Factor: 12.0-in x 9.6-in, 30.5 cm x 24.4 cm
- All Solid Capacitor design (100% Japan-made high-quality
Conductive Polymer Capacitors)
CPU - Supports the Intel®CoreTM i7 and Intel®CoreTM i5 Processors
in the LGA1156 Package
- Advanced V16 + 2 Power Phase Design
- Supports Intel®Turbo Boost Technology
- Supports Hyper-Threading Technology (see CAUTION 1)
- Supports Untied Overclocking Technology (see CAUTION 2)
- Supports EM64T CPU
Chipset - Intel®P55
Memory - Dual Channel DDR3 Memory Technology (see CAUTION 3)
- 4 x DDR3 DIMM slots
- Supports DDR3 2600+(OC)/2133(OC)/1866(OC)/1600/
1333/1066 non-ECC, un-buffered memory
- Max. capacity of system memory: 16GB (see CAUTION 4)
- Supports Intel®Extreme Memory Profile (XMP)
(see CAUTION 5)
Expansion Slot - 2 x PCI Express 2.0 x16 slots
(Single at x16 or Dual at x8/x8 mode)
- 1 x PCI Express 2.0 x16 slot (at x4 mode, 2.5GT/s)
- 1 x PCI Express 2.0 x1 slot (2.5GT/s)
- 3 x PCI slots
- Supports ATITM CrossFireXTM, 3-Way CrossFireXTM and Quad
CrossFireXTM
- Supports NVIDIA®SLITM and Quad SLITM
Audio - 7.1 CH Windows® VistaTM Premium Level HD Audio with
Content Protection
- DAC with 110dB dynamic range (ALC890 Audio Codec)
- DTS (Digital Theater Systems) support (see CAUTION 6)
- Premium Blu-ray audio support
LAN - PCIE x1 Gigabit LAN 10/100/1000 Mb/s
- Realtek RTL8111DL
- Supports Wake-On-LAN
- Supports Dual LAN with Teaming function
Rear Panel I/O I/O Panel
- 1 x PS/2 Mouse Port
- 1 x PS/2 Keyboard Port
- 1 x Coaxial SPDIF Out Port

77
77
7
- 1 x Optical SPDIF Out Port
- 7 x Ready-to-Use USB 2.0 Ports
- 1 x Powered eSATAII/USB Connector
- 2 x RJ-45 LAN Ports with LED (ACT/LINK LED and SPEED
LED)
- 1 x IEEE 1394 Port
- 1 x Clear CMOS Switch with LED
- HD Audio Jack: Side Speaker/Rear Speaker/Central/Bass/
Line in/Front Speaker/Microphone (see CAUTION 7)
Connector - 6 x SATAII 3.0Gb/s connectors, support RAID (RAID 0,
RAID 1, RAID 10, RAID 5 and Intel Matrix Storage), NCQ,
AHCI and “Hot Plug” functions (see CAUTION 8)
- 1 x ATA133 IDE connector (supports 2 x IDE devices)
- 1 x Floppy connector
- 1 x IR header
- 1 x COM port header
- 1 x HDMI_SPDIF header
- 1 x IEEE 1394 header
- 1 x TPM header
- CPU/Chassis/Power FAN connector
- 24 pin ATX power connector
- 8 pin 12V power connector
- CD in header
- Front panel audio connector
- 3 x USB 2.0 headers (support 6 USB 2.0 ports)
(see CAUTION 9)
- 1 x Dr. Debug (7-Segment Debug LED)
Smart Switch - 1 x Clear CMOS Switch with LED
- 1 x Power Switch with LED
- 1 x Reset Switch with LED
BIOS Feature - 16Mb AMI BIOS
- AMI Legal BIOS
- Supports “Plug and Play”
- ACPI 1.1 Compliance Wake Up Events
- Supports jumperfree
- SMBIOS 2.3.1 Support
- CPU, VCCM, SB, VTT Voltage Multi-adjustment
- Supports I. O. T. (Intelligent Overclocking Technology)
- Supports Smart BIOS
Support CD - Drivers, Utilities, AntiVirus Software (Trial Version)
Unique Feature - ASRock OC Tuner (see CAUTION 10)
- Intelligent Energy Saver (see CAUTION 11)

88
88
8
CAUTION!
1. About the setting of “Hyper Threading Technology”, please check page 62.
2. This motherboard supports Untied Overclocking Technology. Please read
“Untied Overclocking Technology” on page 55 for details.
3. This motherboard supports Dual Channel Memory Technology. Before you
implement Dual Channel Memory Technology, make sure to read the
installation guide of memory modules on page 18 for proper installation.
4. Due to the operating system limitation, the actual memory size may be
less than 4GB for the reservation for system usage under Windows®XP
and Windows®VistaTM. For Windows®XP 64-bit and Windows®VistaTM
64-bit with 64-bit CPU, there is no such limitation.
5. For those CPU that only support up to DDR3 1333, the XMP DDR3 1600
is supported through overclocking.
WARNING
Please realize that there is a certain risk involved with overclocking, including adjusting
the setting in the BIOS, applying Untied Overclocking Technology, or using the third-
party overclocking tools. Overclocking may affect your system stability, or even
cause damage to the components and devices of your system. It should be done at
your own risk and expense. We are not responsible for possible damage caused by
overclocking.
- Instant Boot
- ASRock Instant Flash (see CAUTION 12)
- Hybrid Booster:
- CPU Frequency Stepless Control (see CAUTION 13)
- ASRock U-COP (see CAUTION 14)
- Boot Failure Guard (B.F.G.)
- Combo Cooler Option (C.C.O.) (see CAUTION 15)
- Good Night LED
Hardware - CPU Temperature Sensing
Monitor - Chassis Temperature Sensing
- CPU/Chassis/Power Fan Tachometer
- CPU Quiet Fan
- CPU/Chassis Fan Multi-Speed Control
- Voltage Monitoring: +12V, +5V, +3.3V, CPU Vcore
OS - Microsoft® Windows® XP / XP 64-bit / VistaTM / VistaTM 64-bit
/ Win7 compliant
Certifications - FCC, CE, WHQL
- EuP Ready (EuP ready power supply is required)
(see CAUTION 16)
* For detailed product information, please visit our website: http://www.asrock.com

99
99
9
6. DTS (Digital Theater Systems) is a multi-channel digital surround sound
format. To enable DTS function, you need to adjust the settings after
audio driver installation. Please refer to “DTS Operation Guide” on page 53
for details.
7. For microphone input, this motherboard supports both stereo and mono
modes. For audio output, this motherboard supports 2-channel, 4-channel,
6-channel, and 8-channel modes. Please check the table on page 13 for
proper connection.
8. Before installing SATAII hard disk to SATAII connector, please read the
“SATAII Hard Disk Setup Guide” on page 42 to adjust your SATAII hard disk
drive to SATAII mode. You can also connect SATA hard disk to SATAII
connector directly.
9. Power Management for USB 2.0 works fine under Microsoft®Windows®
VistaTM 64-bit / VistaTM / XP 64-bit / XP SP1 or SP2.
10. It is a user-friendly ASRock overclocking tool which allows you to surveil
your system by hardware monitor function and overclock your hardware
devices to get the best system performance under Windows®environment.
Please visit our website for the operation procedures of ASRock OC
Tuner.
ASRock website: http://www.asrock.com/feature/OCTuner/index.htm
11. Featuring an advanced proprietary hardware and software design,
Intelligent Energy Saver is a revolutionary technology that delivers
unparalleled power savings. In other words, it is able to provide exceptional
power saving and improve power efficiency without sacrificing computing
performance. Please visit our website for the operation procedures of
Intelligent Energy Saver.
ASRock website: http://www.asrock.com/feature/IES/index.html
12. ASRock Instant Flash is a BIOS flash utility embedded in Flash ROM.
This convenient BIOS update tool allows you to update system BIOS
without entering operating systems first like MS-DOS or Windows®. With
this utility, you can press <F6> key during the POST or press <F2> key to
BIOS setup menu to access ASRock Instant Flash. Just launch this tool
and save the new BIOS file to your USB flash drive, floppy disk or hard
drive, then you can update your BIOS only in a few clicks without prepar-
ing an additional floppy diskette or other complicated flash utility. Please
be noted that the USB flash drive or hard drive must use FAT32/16/12 file
system.
13. Although this motherboard offers stepless control, it is not recommended
to perform over-clocking. Frequencies other than the recommended CPU
bus frequencies may cause the instability of the system or damage the
CPU.
14. While CPU overheat is detected, the system will automatically shutdown.
Before you resume the system, please check if the CPU fan on the
motherboard functions properly and unplug the power cord, then plug it
back again. To improve heat dissipation, remember to spray thermal
grease between the CPU and the heatsink when you install the PC system.

1010
1010
10
1.31.3
1.31.3
1.3 TT
TT
Two SLIwo SLI
wo SLIwo SLI
wo SLITMTM
TMTM
TM Graphics Card SupporGraphics Card Suppor
Graphics Card SupporGraphics Card Suppor
Graphics Card Support Listt List
t Listt List
t List
(for Windows®XP / XP 64-bit / VistaTM / VistaTM 64-bit)
Chipset Model Name Chipset Name Driver
Vendor
NVIDIA
* The graphics card with * mark is supported under Windows®XP / XP 64-bit only.
* For the latest updates of the supported PCI Express VGA card list for SLITM Mode,
please visit our website for details.
ASRock website: http://www.asrock.com/support/index.htm
GIGABYTE GV-NX85T256H * GeForce 8500 GT 186.18
MSI NX8600GT-T2D256E GeForce 8600 GT 186.18
Gigabyte GV-NX88T256H GeForce 8800 GT 186.18
LEADTEK PX8800 GTX TDH GeForce 8800 GTX 186.18
Chaintech GES96GT-A1512P GeForce 9600 GT 186.18
ASUS EN9800GT TDP/HTDP/512M GeForce 9800GT 186.18
LEADTEK PX9800GTX GeForce 9800GTX 186.18
LEADTEK PX9800 GTX+ GeForce 9800GTX+ 186.18
MSI N250GTS-2D512-OC GeForce GTS 250 186.18
GIGABYTE GV-N26-896H-B GeForce GTX260 186.18
LEADTEK GTX 275 GeForce GTX260 186.18
15. Combo Cooler Option (C.C.O.) provides the flexible option to adopt two
different CPU cooler types, Socket LGA 775 and LGA 1156. Please be
noticed that not all the 775 CPU Fan can be used.
16. EuP, stands for Energy Using Product, was a provision regulated by
European Union to define the power consumption for the completed system.
According to EuP, the total AC power of the completed system shall be
under 1.00W in off mode condition. To meet EuP standard, an EuP ready
motherboard and an EuP ready power supply are required. According to
Intel’s suggestion, the EuP ready power supply must meet the standard of
5v standby power efficiency is higher than 50% under 100 mA current
consumption. For EuP ready power supply selection, we recommend you
checking with the power supply manufacturer for more details.

1111
1111
11
1.41.4
1.41.4
1.4 TT
TT
Two CrossFwo CrossF
wo CrossFwo CrossF
wo CrossFireXireX
ireXireX
ireXTMTM
TMTM
TM Graphics Card SupporGraphics Card Suppor
Graphics Card SupporGraphics Card Suppor
Graphics Card Support Listt List
t Listt List
t List
(for Windows®XP / XP 64-bit / VistaTM / VistaTM 64-bit)
Chipset Model Name Chipset Name Driver
Vendor
ATI MSI RX2600PRO-T2D256EZ Radeon HD 2600PRO Catalyst 9.1
Gigabyte GV-RX26T256HP-B Radeon HD 2600XT Catalyst 9.1
Powercolor AX3870X2 1GBD3-H * Radeon HD3870X2 Catalyst 9.1
ASUS EAH4350 SILENT/DI/512MD2/A RADEON HD 4350 Catalyst 9.1
ASUS EAH4870X2/HDTI/2G * RADEON HD 4870X2 Catalyst 9.1
1.51.5
1.51.5
1.5 Three CrossFireXThree CrossFireX
Three CrossFireXThree CrossFireX
Three CrossFireXTMTM
TMTM
TM Graphics Card Support ListGraphics Card Support List
Graphics Card Support ListGraphics Card Support List
Graphics Card Support List
(for Windows®VistaTM / VistaTM 64-bit)
Chipset Model Name Chipset Name Driver
Vendor
ATI
* For the latest updates of the supported PCI Express VGA card list for
CrossFireXTM Mode, please visit our website for details.
ASRock website: http://www.asrock.com/support/index.htm
Powercolor AX4670 512MD3-P RADEON 4670 Catalyst 9.6
Gecube GC-HD485PG3-E3 RADEON 4850 Catalyst 9.6
* The graphics cards with * mark are supported under Windows®VistaTM / VistaTM 64-bit
only.
* For the latest updates of the supported PCI Express VGA card list for
CrossFireXTM Mode, please visit our website for details.
ASRock website: http://www.asrock.com/support/index.htm

1212
1212
12
1.6 Motherboard Layout1.6 Motherboard Layout
1.6 Motherboard Layout1.6 Motherboard Layout
1.6 Motherboard Layout
Intel
P55
30.5cm (12.0 in)
24.4cm (9.6 in)
CMOS
Battery
DDR3_A2 (64 bit, 240-pin module)
DDR3_A1 (64 bit, 240-pin module)
DDR3_B2 (64 bit, 240-pin module)
DDR3_B1 (64 bit, 240-pin module)
ATXPWR1
HDLED RESET
PLED PWRBTN
PANEL1
1
USB8_9
11
FRONT_1394
11
IDE1
VIA
VT6308S
SATAII_5_6 SATAII_3_4 SATAII_1_2
16Mb
BIOS
P55 Deluxe
ATX12V1
PS2_USB_PWR1
1
DDR3 2600+
PS2
Mouse
Coaxial
SPDIF
PS2
Keyboard
Optical
SPDIF
Clr
CMOS
USB 2.0
T:USB2
B: USB3
Top:
IEEE
1394
USB 2.0
T:USB0
B: USB1
Top:
RJ-45
Top:
SIDE SPK
Center:
REAR SPK
Bottom:
CTR BASS
Top:
LINE IN
Center:
FRONT
Bottom:
MIC IN
eSATAII/USB7
USB6
LAN
PHY
1
HD_AUDIO1
CHA_FAN3
CHA_FAN1
PWRBTN
RSTBTN
Dr.
Debug
AUDIO
CODEC
CD1
Super
I/O
SPEAKER1
1
CLRCMOS1
1
IR1
1
COM1
1
FLOPPY1
1
HDMI_SPDIF1
TPM1
11
PCIE1
PCI1
CrossFireX
RoHS
123456
7
8
9
10
11
12
13
14
15
16
17
24
25 23 1819
20
2122
26
27
282930
31
32
33
34
35
36
37
38
39
40
41
USB10_11
11
USB12_13
11
CHA_FAN2
PWR_FAN1
CPU_FAN1
LAN
PHY
PCIE3
PCIE2
PCIE4
PCI2
PCI3
Dual Channel
1394a
PCI Express 2.0
Dual GLAN
USB 2.0
T:USB4
B: USB5
Top:
RJ-45
EuP Ready
1 PS2_USB_PWR1 Jumper 22 Dr. Debug (LED)
2 ATX 12V Power Connector (ATX12V1) 23 USB 2.0 Header (USB8_9, Blue)
3 1156-Pin CPU Socket 24 Intel P55 Chipset
4 Chassis Fan Connector (CHA_FAN3) 25 Front Panel IEEE 1394 Header
5 2 x 240-pin DDR3 DIMM Slots (FRONT_1394, Red)
(Dual Channel: DDR3_A2, DDR3_B2, Blue) 26 Chassis Fan Connector (CHA_FAN2)
6 2 x 240-pin DDR3 DIMM Slots 27 Chassis Fan Connector (CHA_FAN1)
(Dual Channel: DDR3_A1, DDR3_B1, White) 28 Floppy Connector (FLOPPY1)
7 Reset Switch (RSTBTN) 29 COM Port Header (COM1)
8 Power Switch (PWRBTN) 30 HDMI_SPDIF Header
9 ATX Power Connector (ATXPWR1) (HDMI_SPDIF1,Yellow)
10 TPM Header (TPM1) 31 Front Panel Audio Header
11 16Mb SPI Flash (HD_AUDIO1, Lime)
12 Primary IDE Connector (IDE1, Blue) 32 Internal Audio Connector: CD1 (Black)
13 Clear CMOS Jumper (CLRCMOS1) 33 PCI Slots (PCI3)
14 SATAII Connector (SATAII_1_2, Red) 34 PCI Express 2.0 x16 Slot (PCIE4, Orange)
15 SATAII Connector (SATAII_3_4, Red) 35 PCI Slots (PCI2)
16 SATAII Connector (SATAII_5_6, Red) 36 PCI Express 2.0 x16 Slot (PCIE3, Orange)
17 Chassis Speaker Header (SPEAKER1, Purple) 37 PCI Express 2.0 x1 Slot (PCIE2, White)
18 System Panel Header (PANEL1, Orange) 38 PCI Slots (PCI1)
19 USB2.0 Header (USB12_13, Blue) 39 PCI Express 2.0 x16 Slot (PCIE1,Blue)
20 Infrared Module Header (IR1) 40 CPU Fan Connector (CPU_FAN1)
21 USB 2.0 Header (USB10_11, Blue) 41 Power Fan Connector (PWR_FAN1)

1313
1313
13
124
356
7
8
9
10
11
13
14
15
16
17
18
19
1
2
1.71.7
1.71.7
1.7 I/O PanelI/O Panel
I/O PanelI/O Panel
I/O Panel
To enable Multi-Streaming function, you need to connect a front panel audio cable to the front
panel audio header. After restarting your computer, you will find “Mixer” tool on your system.
Please select “Mixer ToolBox” , click “Enable playback multi-streaming”, and click
“ok”. Choose “2CH”, “4CH”, “6CH”, or “8CH” and then you are allowed to select “Realtek HDA
Primary output” to use Rear Speaker, Central/Bass, and Front Speaker, or select “Realtek
HDA Audio 2nd output” to use front panel audio.
** If you use 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”.
See the table below for connection details in accordance with the type of speaker you use.
TABLE for Audio Output Connection
Audio Output Channels Front Speaker Rear Speaker Central / Bass Side Speaker
(No. 11) (No. 8) (No. 9) (No. 7)
2 V -- -- --
4 V -- -- V
6V--VV
8VVVV
LAN Port
ACT/LINK
LED SPEED
LED
* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED
indications.
LAN Port LED Indications
Activity/Link LED SPEED LED
Status Description Status Description
Off No Link Off 10Mbps connection
Blinking Data Activity Orange 100Mbps connection
On Link Green 1Gbps connection
1 PS/2 Mouse Port (Green) ** 11 Front Speaker (Lime)
2 Coaxial SPDIF Out Port 12 Microphone (Pink)
3 USB 2.0 Port (USB6) 13 USB 2.0 Ports (USB45)
*4 LAN RJ-45 Port 14 USB 2.0 Ports (USB23)
5 IEEE 1394 Port (IEEE 1394) 15 USB 2.0 Ports (USB01)
* 6 LAN RJ-45 Port 16 Powered eSATAII/USB Connector
7 Side Speaker (Gray) 17 Optical SPDIF Out Port
8 Rear Speaker (Black) 18 Clear CMOS Switch (CLRCBTN)
9 Central / Bass (Orange) 19 PS/2 Keyboard Port (Purple)
10 Line In (Light Blue)

1414
1414
14
Chapter 2: InstallationChapter 2: Installation
Chapter 2: InstallationChapter 2: Installation
Chapter 2: Installation
This is an ATX form factor (12.0" x 9.6", 30.5 x 24.4 cm) motherboard. Before you install
the motherboard, study the configuration of your chassis to ensure that the motherboard
fits into it.
Make sure to unplug the power cord before installing or removing the
motherboard. Failure to do so may cause physical injuries to you and
damages to motherboard components.
2.1 Screw Holes2.1 Screw Holes
2.1 Screw Holes2.1 Screw Holes
2.1 Screw Holes
Place screws into the holes indicated by circles to secure the motherboard to the
chassis.
Do not over-tighten the screws! Doing so may damage the motherboard.
2.2 Pre-installation Precautions2.2 Pre-installation Precautions
2.2 Pre-installation Precautions2.2 Pre-installation Precautions
2.2 Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
1. Unplug the power cord from the wall socket before touching any component.
2. To avoid damaging the motherboard components due to static electricity, NEVER
place your motherboard directly on the carpet or the like. Also remember to use
a grounded wrist strap or touch a safety grounded object before you handle
components.
3. Hold components by the edges and do not touch the ICs.
4. Whenever you uninstall any component, place it on a grounded antistatic pad or
in the bag that comes with the component.
Before you install or remove any component, ensure that the power is
switched off or the power cord is detached from the power supply.
Failure to do so may cause severe damage to the motherboard, peripherals,
and/or components.

1515
1515
15
2.3 CPU Installation2.3 CPU Installation
2.3 CPU Installation2.3 CPU Installation
2.3 CPU Installation
For the installation of Intel 1156-Pin CPU,
please follow the steps below.
Before you insert the 1156-Pin CPU into the socket, please check if
the CPU surface is unclean or if there is any bent pin on the socket.
Do not force to insert the CPU into the socket if above situation is
found. Otherwise, the CPU will be seriously damaged.
Step 1. Open the socket:
Step 1-1. Disengaging the lever by depressing
down and out on the hook to clear
retention tab.
Step 1-2. Rotate the load lever to fully open po-
sition at approximately 135 degrees.
Step 1-3. Rotate the load plate to fully open po-
sition at approximately 100 degrees.
Step 2. Remove PnP Cap (Pick and Place Cap).
1. It is recommended to use the cap tab to handle and avoid kicking
off the PnP cap.
2. This cap must be placed if returning the motherboard for after
service.
1156-Pin Socket Overview
Contact Array Socket Body
Load Lever
Load Plate

1616
1616
16
black line
Pin1
alignment key
alignment key
Pin1
1156-PinCPU
1156-PinSocket
Step 3. Insert the 1156-Pin CPU:
Step 3-1. Hold the CPU by the edge where is
marked with black line.
Step 3-2. Orient the CPU with IHS (Integrated Heat
Sink) up. Locate Pin1 and the two ori-
entation key notches.
For proper inserting, please ensure to match the two orientation key
notches of the CPU with the two alignment keys of the socket.
Step 3-3. Carefully place the CPU into the socket
by using a purely vertical motion.
Step 3-4. Verify that the CPU is within the socket
and properly mated to the orient keys.
Step 4. Close the socket:
Step 4-1. Rotate the load plate onto the IHS.
Step 4-2. While pressing down lightly on load
plate, engage the load lever.
Step 4-3. Secure load lever with load plate tab
under retention tab of load lever.
orientation key notch
orientation key notch

1717
1717
17
2.42.4
2.42.4
2.4 Installation of CPU Fan and HeatsinkInstallation of CPU Fan and Heatsink
Installation of CPU Fan and HeatsinkInstallation of CPU Fan and Heatsink
Installation of CPU Fan and Heatsink
This motherboard is equipped with 1156-Pin socket that supports Intel 1156-Pin CPU.
Please adopt the type of heatsink and cooling fan compliant with Intel 1156-Pin CPU
to dissipate heat. Before you installed the heatsink, you need to spray thermal
interface material between the CPU and the heatsink to improve heat dissipation.
Ensure that the CPU and the heatsink are securely fastened and in good contact with
each other. Then connect the CPU fan to the CPU_FAN connector (CPU_FAN1, see
page 12, No. 40).
For proper installation, please kindly refer to the instruction manuals of your
CPU fan and heatsink.
Below is an example to illustrate the installation of the heatsink for 1156-Pin CPU.
Step 1. Apply thermal interface material onto center of
IHS on the socket surface.
Step 2. Place the heatsink onto the socket. Ensure
fan cables are oriented on side closest to the
CPU fan connector on the motherboard
(CPU_FAN1, see page 12, No. 40).
Step 3. Align fasteners with the motherboard
throughholes.
Step 4. Rotate the fastener clockwise, then press
down on fastener caps with thumb to install
and lock. Repeat with remaining fasteners.
If you press down the fasteners without rotating them clockwise,
the heatsink cannot be secured on the motherboard.
Step 5. Connect fan header with the CPU fan connector on the motherboard.
Step 6. Secure excess cable with tie-wrap to ensure cable does not interfere with
fan operation or contact other components.
Apply Thermal
Interface Material
Fan cables on side
closest to MB header
Fastener slots
pointing straight out
Press Down
(4 Places)
Please be noticed that this motherboard supports Combo Cooler
Option (C.C.O.), which provides the flexible option to adopt two
different CPU cooler types, Socket LGA 775 and LGA 1156. The
white throughholes are for Socket LGA 1156 CPU fan.

1818
1818
18
2.5 Installation of Memory Modules (DIMM)2.5 Installation of Memory Modules (DIMM)
2.5 Installation of Memory Modules (DIMM)2.5 Installation of Memory Modules (DIMM)
2.5 Installation of Memory Modules (DIMM)
This motherboard provides four 240-pin DDR3 (Double Data Rate 3) DIMM slots,
and supports Dual Channel Memory Technology. For dual channel configuration,
you always need to install identical (the same brand, speed, size and chip-
type) DDR3 DIMM pair in the slots of the same color. In other words, you have to
install identical DDR3 DIMM pair in Dual Channel (DDR3_A1 and DDR3_B1;
white slots; see p.12 No.6), so that Dual Channel Memory Technology can be
activated. This motherboard also allows you to install four DDR3 DIMMs for dual
channel configuration, and please install identical DDR3 DIMMs in all four slots.
You may refer to the Dual Channel Memory Configuration Table below.
Dual Channel Memory Configurations
DDR3_A2 DDR3_A1 DDR3_B2 DDR3_B1
(Blue Slot) (White Slot) (Blue Slot) (White Slot)
(1) - Populated - Populated
(2)* Populated Populated Populated Populated
* For the configuration (2), please install identical DDR3 DIMMs in all four
slots.
1. If you want to install two memory modules, for optimal compatibility
and reliability, it is recommended to install them in the slots of the
same color. In other words, install them either in the set of white slots
(DDR3_A1 and DDR3_B1).
2. If only one memory module or three memory modules are installed
in the DDR3 DIMM slots on this motherboard, it is unable to activate
the Dual Channel Memory Technology.
3. It is not allowed to install a DDR or DDR2 memory module into
DDR3 slot;otherwise, this motherboard and DIMM may be damaged.
4. Please install the memory module into the white slot (DDR3_B1) for
the first priority.

1919
1919
19
notch
break
notch break
Installing a DIMMInstalling a DIMM
Installing a DIMMInstalling a DIMM
Installing a DIMM
Please make sure to disconnect power supply before adding or
removing DIMMs or the system components.
Step 1. Unlock a DIMM slot by pressing the retaining clips outward.
Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break
on the slot.
The DIMM only fits in one correct orientation. It will cause permanent
damage to the motherboard and the DIMM if you force the DIMM into the slot
at incorrect orientation.
Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends fully
snap back in place and the DIMM is properly seated.

2020
2020
20
2.6 Expansion Slots (PCI and PCI Express Slots)2.6 Expansion Slots (PCI and PCI Express Slots)
2.6 Expansion Slots (PCI and PCI Express Slots)2.6 Expansion Slots (PCI and PCI Express Slots)
2.6 Expansion Slots (PCI and PCI Express Slots)
There are 3 PCI slots and 4 PCI Express slots on this motherboard.
PCIslots: PCI slots are used to install expansion cards that have the 32-bit PCI
interface.
PCIE slots:
PCIE1 (PCIE x16 slot; Blue) is used for PCI Express x16 lane width
graphics cards, or used to install PCI Express graphics cards to
support CrossFireXTM or SLITM function.
PCIE2 (PCIE x1 slot; White) is used for PCI Express cards with x1 lane
width cards, such as Gigabit LAN card, SATA2 card, etc.
PCIE3 (PCIE x16 slot; Orange) is used for PCI Express x16 lane width
graphics cards, or used to install PCI Express graphics cards to
support CrossFireXTM or SLITM function.
PCIE4 (PCIE x16 slot; Orange) is used for PCI Express x1 lane width
cards, such as Gigabit LAN card, SATA2 card, etc., or used to install
PCI Express graphics cards to support 3-Way CrossFireXTM function.
1. In single VGA card mode, it is recommended to install a PCI Express
x16 graphics card on PCIE1 slot.
2. In CrossFireXTM mode or SLITM mode, please install PCI Express x16
graphics cards on PCIE1 and PCIE3 slots. Therefore, both these two
slots will work at x8 bandwidth.
3. In 3-Way CrossFireXTM mode, please install PCI Express x16 graphics
cards on PCIE1, PCIE3 and PCIE4 slots. Therefore, PCIE1 and PCIE3
slots will work at x8 bandwidth while PCIE4 slot will work at x4
bandwidth.
4. Please connect a chassis fan to motherboard chassis fan connector
(CHA_FAN1 or CHA_FAN2) when using multiple graphics cards for
better thermal environment.
Installing an expansion cardInstalling an expansion card
Installing an expansion cardInstalling an expansion card
Installing an expansion card
Step 1. Before installing the expansion card, please make sure that the power
supply is switched off or the power cord is unplugged. Please read the
documentation of the expansion card and make necessary hardware
settings for the card before you start the installation.
Step 2. Remove the system unit cover (if your motherboard is already installed in
a chassis).
Step 3. Remove the bracket facing the slot that you intend to use. Keep the
screws for later use.
Step 4. Align the card connector with the slot and press firmly until the card is
completely seated on the slot.
Step 5. Fasten the card to the chassis with screws.
Step 6. Replace the system cover.