Asteroom R01 User manual

3D Tour Kit
Quick Guide
Model: R01

1
Download Onboarding Manual
Scan the QR code to download
onboarding manual. Or type link
into browser to read the manual.
https://www.asteroom.com/r/9p2aut
Watch Asteroom Tutorial Video
We know no one likes to read
instructions. So watch this video and
learn everything you need to know
about Asteroom in a few minutes.
Open your camera app on your
mobile phone, and scan (point at)
the QR Code to view video.
Or type link into browser to view.
https://www.asteroom.com/r/575c5h

2
3
Download Asteroom Mobile App and
Create an Account
AndroidiOS
Activate Brokerage Plan Account
Enter brokerage code* if your brokerage is an aliate,
1. Click "Menu"
2. Click "Plan"
3. Enter brokerage code
You may skip this step if your brokerage is not an Asteroom
aliate.
*Brokerage code is used to activate your Brokerage Plan provided by your
brokerage. Ask your broker for the code, or go to www.asteroom.com/en/pricing
and enter your brokerage email to obtain the brokerage code. Log in web or app,
and go to Settings > Plan to enter it.

2
3
Asteroom 3D Tour Kit Parts Description
Rotator Phone case
Fisheye lens
USB charger
Tripod

4
5
Getting Started
I. 3D Tour Kit
1. Charge the Rotator
The red light indicates charging and will turn o when fully
charged.
2. Extend Tripod
Fully extend all legs and clip
into a locking position. Ensure
the tripod is on a level surface
extended to about 4 feet in
height from the ground.
3. Attach Rotator to the Tripod
Align the base of the rotator
with the tripod bolt. Screw
clockwise until it is secure on
the tripod.

4
5
II. Set up Your Phone
Take o any personal phone case and attach the Asteroom phone
case to your phone. Unscrew the sheye lens from the clip and then
screw it into the phone case.
Asteroom phone case will always give the best result because it's
designed to ensure a perfect alignment between the sheye lens and
the phone.

6
7
If you do not have a compatible Asteroom phone case, clip sheye
lens to phone lens. It is recommended to keep it when the phone
camera sticks out from the back of the phone.
Turn on the "Camera" in the app to see if there is any area blurred
or darkly colored.
Do remember to remove the cover of sheye lens.

6
7
III. Place Phone on the Rotator
For phones with the camera on the
left or right side, align the lens with
the nearest clip jaw so the camera
is as center as possible while the
phone is kept balanced.
For phones with the camera in the
center, align the camera with the
nob in the middle.

8
9
IV. Connect the Rotator with the App
1. Turn on Bluetooth of your
phone, and allow Asteroom to
access Bluetooth. Turn on the
rotator with “ON/OFF”switch.
2. Click “Camera” in the app.
3. The rotator will automatically
pair with the app via Blue-
tooth.
4. After the connection is established, [Connected] will be shown
on the screen, and you are ready to start taking photos.

8
9
Notes on Shooting
Before you start taking your first tour - please ensure all doors
are opened so that Asteroom's AI can learn the layout of the home.
Open the blinds so that your listing will get the best lighting. If
your phone supports HDR, use the HDR feature to get the best
photo quality.
Line of Sight
Start from the entrance - take a
panoramic photo. Then slowly
move into other parts of the home
while keeping a "direct line of
sight" with one or more spots
that you had shot. (See image
below) The order of the shots
do not matter as long as all the
rooms and hallways are covered.
You do not need to shoot
staircases, but do remember to
shoot stairs landing. Asteroom
will connect the oors
automatically for you.

10
11
System Requirements
- iOS 11 or newer
- Android 7 or newer
This product and mobile app use Bluetooth 4.0 for data transmission.
Ensure your phone specications meet product requirements.
Limited Warranty
3D Tour Kit is guaranteed with one-year warranty.
Contact [email protected] for assistance with all claims.
Intended Usage
Asteroom was designed to be used to create 3D Tours.
Any use outside of this will result in a voided.
In-app Help
View our help center by clicking "Help Center" in the "Menu ".
View tutorial videos by clicking "Tutorials" in the Menu.

10
11
Support
Help Center: https://asteroomhelp.zendesk.com/
Support Email: [email protected]
Live support: Call [phone]
Federal Communications Commission (FCC) Statement
You are cautioned that changes or modications not expressly approved
by the part responsible for compliance could void the user’s authority to
operate the equipment.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

12
NASR01EN
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received, including interference
that may cause undesired operation of the device.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. End users must follow the specic operating
instructions for satisfying RF exposure compliance. This transmitter must
not be co-located or operating in conjunction with any other antenna or
transmitter.
RF exposure warning
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed
to provide a separation distance of at least 20 cm from all persons and
must not be co-located or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provide with antenna
installation instructions and transmitter operating conditions for satisfying
RF exposure compliance.