Asus AAEON BOXER-8251AI Operation manual

Most Confidential
Confidential
Internal
Public
V
NVIDIA Jetson Xavier NX Platform
Ubuntu 18.04
BOXER-8251AI
Apr. 2021
Revision 1.0
Installation User Guide

1
Revision History
Revision
Date
Description
1.0
Apr. 2021
Initial release.

2
Contents
Revision History..............................................................................................................1
1. Preparing................................................................................................................3
1.1. Pre-requisites.............................................................................................3
1.2. In Linux Host...............................................................................................4
2. To Flash Image........................................................................................................5
2.1. Flash Image to Board .................................................................................5

3
1.Preparing
1.1. Pre-requisites
1. Prepare an image compressed file. Its name will be like
Ubuntu_18.04_{OS_IF}.{PLF_IF}.{PJ_IF}.{BN}.tar.gz
I. {OS_IF} is OS Information; e.g. UB1804X which UB means Ubuntu, 1804 means
Ubuntu 18.04 and X means Desktop version.
II. {PLF_IF} is Platform Information; e.g.NV05
III. {PJ_IF} is Project Information; e.g. BOXER-8251AI
IV. {BN}is Build Number; e.g. 0,1,2,...,N
2. Prepare one host PC that OS is Ubuntu 16.04 or 18.04
3. Prepare Jetson Xavier NX module.

4
1.2. In Linux Host
1. Unzip image compression file on Ubuntu Host PC.
$tar -zxvf Ubuntu_18.04_{OS_IF}.{PLF_IF}.{PJ_IF}.{BN}.tar.gz
2. Connect Host PC and BOXER-8251AI via micro USB.
3. Press and hold down the recovery button and then connect the
power supply. Please release the recovery button after two seconds.
The target board goes into recovery mode now.
4. If device is in recovery mode, lsusb command on host PC will list a
line of “0955:7019 NVidia Corp”

5
2.To Flash Image
2.1. Flash Image to Board
1. Type [Ctrl] + [Alt] + [t] to open terminal on Ubuntu Host PC.
2. Enter the bootloader folder that you unzip.
3. Execute script to flash image.
$ sudo ./flashall.sh
4. Flash image complete.