Asus PB248 Series User manual

PB248 Series
LCD Monitor
User Guide

ii
Contents
 
 
 
 

  
  
  
1.3.1 Frontview....................................................................... 1-2
1.3.2 Backview........................................................................ 1-3
1.3.3 QuickFitFunction............................................................ 1-4

  
  
  
  

  
3.1.1 Howtorecongure.......................................................... 3-1
3.1.2 OSDfunctionintroduction............................................... 3-1
  
  
  

iii
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is
required to assure compliance with FCC regulations. Changes or modications
to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
As an Energy Star® Partner, our company has determined that this
product meets the Energy Star® guidelines for energy efciency.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
This Class B digital apparatus meets all requirements of the Canadian
Interference - Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du
Réglement sur le matériel brouiller du Canada.

iv
Safety information
• Beforesettingup themonitor,carefully readallthedocumentation thatcame
withthepackage.
• Topreventreorshockhazard,neverexposethemonitortorainormoisture.
• Nevertrytoopenthemonitorcabinet.Thedangeroushighvoltagesinsidethe
monitormayresultinseriousphysicalinjury.
• Ifthepowersupplyisbroken,donottrytoxitbyyourself.Contactaqualied
servicetechnicianoryourretailer.
• Beforeusingtheproduct,makesureallcablesarecorrectlyconnectedandthe
powercablesarenotdamaged.Ifyoudetectanydamage,contactyourdealer
immediately.
• Slotsandopeningsonthebackortopofthecabinetareprovidedfor
ventilation.Donotblocktheseslots.Neverplacethisproductnearorovera
radiatororheatsourceunlessproperventilationisprovided.
• Themonitorshouldbeoperatedonlyfromthetypeofpowersourceindicated
on the label. If you are not sure of the type of power supply to your home,
consultyourdealerorlocalpowercompany.
• Usetheappropriatepowerplugwhichcomplieswithyourlocalpowerstandard.
• Donotoverloadpowerstripsandextentioncords.Overloadingcanresultinre
orelectricshock.
• Avoiddust,humidity,andtemperatureextremes.Donotplacethemonitorin
anyareawhereitmaybecomewet.Placethemonitoronastablesurface. 
• Unplugtheunitduringalightningstormorifitwillnotbeusedforalongperiod
oftime.Thiswillprotectthemonitorfromdamageduetopowersurges.
• Neverpushobjects orspillliquidofanykindintotheslotsonthemonitor
cabinet.
• To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked between
100-240VAC.
• Ifyouencountertechnical problems withthemonitor,contactaqualified
servicetechnicianoryourretailer.
• Adjustment of the volume control as well as the equalizer to other settings
thanthecenterpositionmayincreasetheear-/headphonesoutputvoltageand
thereforethesoundpressurelevel.
Thissymbolofthecrossedoutwheeledbinindicatesthattheproduct(electrical,
electronic equipment, and mercury-containing button cell battery) should not
be placed in municipal waste. Please check local regulations for disposal of
electronicproducts.
AEEE yönetmeliğine uygundur

v
Care & Cleaning
• Beforeyoulift orrepositionyourmonitor, it isbettertodisconnect thecables
andpowercord.Followthecorrectliftingtechniqueswhen positioningthe
monitor.When liftingorcarrying themonitor,grasp theedgesofthemonitor.
Donotliftthedisplaybythestandorthecord.
• Cleaning.Turnyourmonitoroffandunplugthepowercord.Cleanthemonitor
surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed
withaclothdampenedwithmildcleaner.
• Avoidusing a cleaner containing alcohol oracetone.Useacleaner intended
forusewiththemonitor.Neverspraycleanerdirectlyonthescreen,asitmay
dripinsidethemonitorandcauseanelectricshock.
The following symptoms are normal with the monitor:
• Thescreenmayickerduringtheinitialuseduetothenatureoftheuorescent
light. Turnoff the Power Switch and turn it on again to make sure that the
ickerdisappears.
• Youmayfindslightlyunevenbrightnessonthescreendependingonthe
desktoppatternyouuse.
• When the same image is displayed for hours, an afterimage of the previous
screenmayremainafterswitchingtheimage.Thescreenwillrecoverslowlyor
youcanturnoffthePowerSwitchforhours.
• Whenthescreenbecomesblackorashes,orcannotworkanymore,contact
yourdealerorservicecentertoxit.Donotrepairthescreenbyyourself!
Conventions used in this guide
WARNING:Informationtopreventinjurytoyourselfwhentryingto
completeatask.
CAUTION:Informationtopreventdamagetothecomponentswhentrying
tocompleteatask.
IMPORTANT:InformationthatyouMUSTfollowtocompleteatask.
NOTE:Tipsandadditionalinformationtoaidincompletingatask.
Where to nd more information
Refertothefollowingsourcesfor additional informationand forproductand
softwareupdates.
1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardwareandsoftwareproducts.Refertohttp://www.asus.com
2. Optional documentation
Your product package may include optional documentation that may have
been added by your dealer. These documents are not part of the standard
package.

vi

1-1ASUS PB248 Series LCD Monitor
1.1 Welcome!
Thank you for purchasing the ASUS®LCD monitor!
The latest widescreen LCD monitor from ASUS provides a crisper, broader, and
brighter display, plus a host of features that enhance your viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the monitor brings to you!
1.2 Package contents
Check your package for the following items:
LCD monitor
Quick start guide
Warranty card
Power cord
VGA cable
DVI cable
DisplayPort cable
USB 3.0 cable
Audio cable
Cable tie
If any of the above items is damaged or missing, contact your retailer
immediately.

1-2 Chapter 1: Product introduction
1.3 Monitor introduction
1.3.1 Front view
6
2
7
1
4
5
3
1. QuickFit button:
Activates the QuickFit function designed for alignment.•
The QuickFit function contains 7 pages of common grid patterns and paper•
and photo sizes. (Please refer to 1.3.3 QuickFit Function).
Enacts the selected OSD menu item.•
Increases/Decreases values or moves your selection up/down/left/right.•
MENU button:2.
Turns on the OSD menu.•
Exits the OSD menu or goes back to the previous menu when the OSD•
menu is active.
Exits the QuickFit patterns.•
The OSD menu is not available when the QuickFit function is in use.
Shortcut3.
Default: Brightness hotkey•

1-3ASUS PB248 Series LCD Monitor
To change the hotkey function, go to the Shortcut > Shortcut 1 menu.•
Shortcut4.
Default: Contrast hotkey•
To change the hotkey function, go to the Shortcut > Shortcut 2 menu.•
5. button:
Selects a desired preset mode.•
Automatically adjusts the image to its optimized position, clock, and phase•
by pressing this button for 2-4 seconds (for VGA mode only).
6. button:
Selects an available input source.•
Press button (Input Select button) to display HDMI/DisplayPort
signals after you connect HDMI/DisplayPort cable with the monitor.
7. Power button/power indicator
Turns the monitor on/off.•
The color definition of the power indicator is as the below table.•
Status Description
White On
Orange Standby mode
Off Off
1.3.2 Back view
123 4 5 6 87 9 10
11
Rear connectors
Power switch1. . Press the switch to turn on/off power.

1-4 Chapter 1: Product introduction
AC-IN port2. . This port connects the power cord.
DisplayPort3. . This port is for connection for a DisplayPort compatible device.
HDMI port4. . This port is for connection with an HDMI compatible device.
DVI port5. . This 24-pin port is for PC (Personal Computer) DVI-D digital signal
connection.
VGA port6. . This 15-pin port is for PC VGA connection.
Audio-in port.7. This port connects PC audio source by the bundled audio
cable.
Earphone jack8. .
USB 3.0 upstream port9. . This port is for connection with a USB upstream cable.
The connection enables the USB ports on the monitor.
Kensington lock slot10. .
USB 3.0 downstream ports11. . These ports are for connection with USB devices,
such as USB keyboard/mouse, USB flash drive, etc.
1.3.3 QuickFit Function
The QuickFit function contains three kinds of patterns: (1) Grid patterns (2) Paper
size (3) Photo size. To activate the patterns, press the QuickFit button. Press the
button again until a desired pattern is selected. You can move the button up/down/
left/right to change the pattern’s position if needed. Note that all the patterns can
be moved left/right accroding to your need, but may have limited range for moving
up/down.
Grid patterns1.
The grid patterns facilitate designers and users to organize content and layout on a
page and achieve a consistent look and feel.
Alignment Grid
Paper size2.
QuickFit provides numerous commonly used standard paper sizes for users to view
their documents in real size on the screen.

1-5ASUS PB248 Series LCD Monitor
A4 Letter
Photo size3.
The various real photo sizes displayed in the QuickFit function provides
photographers and other users to accurately view and edit their photos in real size
on the screen.
Photo 4x6, 3x5, 2x2 Photo 8x10, 5x7

1-6 Chapter 1: Product introduction

2-1ASUSPB248SeriesLCDMonitor
2.1 Detaching the arm/base
(for VESA wall mount)
The detachable arm/base of this monitor is specially designed for VESA wall
mount.
Todetachthearm/base:
1. Have the front of the monitor face down on a table.
2. Useascrewdrivertoremovethefourscrewsonthearm(Figure1),andthen
detachthearm/basefromthemonitor(Figure2).
Werecommendthatyoucoverthetablesurfacewithsoftclothtoprevent
damagetothemonitor.
(Figure1) (Figure2)

2-2 Chapter2:Setup
2.2 Adjusting the monitor
Foroptimalviewing,werecommendthatyoulookatthefullfaceofthe•
monitor,thenadjustthemonitortotheanglethatismostcomfortableforyou.
Holdthestandtopreventthemonitorfromfallingwhenyouchangeitsangle.•
Youcanadjustthemonitor’sanglefrom+20˚to-5˚,anditallows• 60˚swivel
adjustmentfromeitherleftorright.Youcanalsoadjustthemonitor’sheight
within+/-10cm.
10cm
60°
0°
60°
+20° ~ -5°
Pivoting the monitor
Liftthemonitortothehighestposition.1.
Tiltthemonitortoitsmaximumangle.2.
Pivotthemonitorclockwisetotheangleyouneed.3.
+20° ~ -5°
Itisnormalthatthemonitorslightlyshakeswhileyouadjusttheviewingangle.
(Tilt) (Swivel) (Heightadjustment)

2-3ASUS PB248 Series LCD Monitor
2.3 Connecting the cables
1. Connect the cables as the following instructions:
To connect the power cord• : connect one end of the power cord securely to
the monitor’s AC input port, the other end to a power outlet.
To connect the VGA/HDMI/DVI/DisplayPort cable• :
Plug one end of the VGA/HDMI/DVI/DisplayPort cable to the monitor’sa.
VGA/HDMI/DVI/DisplayPort jack.
Connect the other end of the VGA/HDMI/DVI/DisplayPort cable to yourb.
computer's VGA/HDMI/DVI/DisplayPort jack.
Tighten the two screws to secure the VGA/DVI connector.c.
To connect the audio cable• :connect one end of the audio cable to the
monitor’s Audio-in port, the other end to the computer’s audio-out port.
To use the earphone:• connect the end with plug type to the monitor’s
earphone jack when an HDMI or DisplayPort signal is fed.
To use the USB 3.0 ports• : Take the supplied USB 3.0 cable, and plug
the smaller end (type B) of the USB upstream cable to the monitor’s USB
upstream port, and the larger end (type A) to your computer’s USB 3.0 port.
Make sure your computer is installed with the lastest Windows 7 operating
system. That will enable the USB ports on the monitor to work.
When these cables are connected, you can choose the desired signal
from the Input Select item in the OSD menu.
2.4 Turning on the monitor
Press the power button . See page 1-2 for the location of the power button. The
power indicator lights up in white to show that the monitor is ON.

2-4 Chapter2:Setup

3-1ASUSPB248SeriesLCDMonitor
3.1 OSD (On-Screen Display) menu
3.1.1 How to reconfigure
PresstheMENUbuttontoactivatetheOSDmenu.1.
Move the2. buttonup/downtonavigatethroughthefunctions.Highlight
the desired function and press the button to activate it. If the function
selectedhasasub-menu,move the buttonup/downtonavigatethrough
thesub-menufunctions.Highlightthedesiredsub-menufunctionandpress
the button to activate it.
Move3. the buttonleft/right tochangethesettingsoftheselectedfunction.
ToexitandsavetheOSDmenu,presstheMENUbuttonrepeatedlyuntilthe4.
OSD menu disappears. Toadjustotherfunctions,repeat steps 1-3.
3.1.2 OSD function introduction
Splendid1.
Thisfunctioncontainssixsub-functionsyoucanselectforyourpreference.
EachmodehastheResetselection,allowingyoutomaintainyoursettingor
return to the preset mode.
Standard Mode•:bestchoicefordocumenteditingwithSPLENDID™
VideoEnhancement.
sRGBMode• :compatiblewithsRGBcolorspace,sRGBmodeisthebest
choicefordocumentediting.

3-2 Chapter3:OSD(On-ScreenDisplay)menu
Scenery Mode• :bestchoiceforsceneryphotodisplaywithSPLENDID™
VideoEnhancement.
Theater Mode•:bestchoiceformovieswithSPLENDID™Video
Enhancement.
User Mode 1/User Mode 2•:MoreitemsareadjustableintheColormenu.
Function Standard
Mode
sRGB
Mode
Scenery
Mode
Theater
Mode
User
Mode
1/User
Mode 2
Brightness Yes Yes Yes Yes Yes
Contrast Yes No Yes Yes Yes
Saturation No No Yes Yes Yes
Hue No No No No Yes
Color Temperature Yes No Yes Yes Yes
Gamma Yes No No No Yes
Advanced
Setting
Six-axis
Hue No No No No Yes
Six-axis
Saturation No No No No Yes
Gain No No No No Yes
Offset No No No No Yes
Color2.
Setadesiredcolorsettingfromthismenu.
Brightness• :theadjustingrangeisfrom0to100.
Contrast• :theadjustingrangeisfrom0to100.
Saturation• :theadjustingrangeisfrom0to100.
Hue• :shiftstheimagecolorbetweengreenandpurple.
Color Temp.• :contains4modesincluding9300K,6500K,5500Kand
5000K.
Gamma• :allowsyoutosetthecolormodeto2.2or1.8.
Advanced Setting• :

3-3ASUS PB248 Series LCD Monitor
6-axis Hue adjustment.*
6-axis Saturation adjustment.*
Adjusts the gain levels for R, G, B.*
Adjusts the black level offset values for R, G, B.*
Color Reset• :
Current Splendid color mode reset:*
Resets the color settings of current color mode to the factory
default value.
All Splendid color mode reset:*
Resets the color settings of all color modes to the factory default
value.
Image3.
Set the image related setting from this menu.
Sharpness• : the adjusting range is from 0 to 100.
Trace Free• : adjusts the response time of the monitor.

3-4 Chapter 3: OSD (On-Screen Display) menu
• AspectControl: adjusts the aspect ratio to full, 4:3, 1:1 or OverScan.
4:3 is only available when input source is in 4:3 format. OverScan is only
available for the HDMI input source.
• ASCR: turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
• Position: adjusts the horizontal position (H-Position) and the vertical
position (V-Position) of the image. The adjusting range is from 0 to 100.
• Focus: reduces Horizonal-line noise and Vertical-line noise of the image
by adjusting (Phase) and (Clock) separately. The adjusting range is from
0 to 100.
• AUTOAdjust: Automatically adjusts the image to its optimized position,
clock, and phase.
• Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
• Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.
4. InputSelect
In this function, you can select your desired input source.
5. SystemSetup
Allows you to adjust the system.